Abstract:This study prepared textured (Ti1/3Zr1/3Hf1/3)B2 medium‐entropy ceramics for the first time that maintain enhanced flexural strength up to 1800°C using single‐phase (Ti1/3Zr1/3Hf1/3)B2 powders, slip casting under a strong magnetic field, and hot‐pressed sintering methods. Effects of WC additive and strong magnetic field direction on the phase compositions, orientation degree, microstructure evolution, and high‐temperature flexural strength of (Ti1/3Zr1/3Hf1/3)B2 were investigated. (Ti1/3Zr1/3Hf1/3)B2 grain grows along the a,b‐axes, resulting in a platelet‐like morphology. Pressure parallel and perpendicular to the magnetic field direction can promote the orientation degree and hinder the texture structure formation, respectively. Reaction products of W(B,C) and (Ti,Zr,Hf)C between (Ti1/3Zr1/3Hf1/3)B2 and WC additive can efficiently refine the (Ti1/3Zr1/3Hf1/3)B2 grain size and promote grain orientation. (Ti1/3Zr1/3Hf1/3)B2 ceramics doped with 5 vol.% WC yielded a Lotgering orientation factor of 0.74 through slip casting under a strong magnetic field (12 T) and hot‐pressed sintering at 1900°C. Furthermore, cleaning the boundary by W(B,C) and introducing texture can enhance the grain boundary strength and improve its high‐temperature flexural strength. The four‐point flexural strength of textured (Ti1/3Zr1/3Hf1/3)B2‐5 vol.% WC ceramics was 770 ± 59 MPa at 1600°C and 638 ± 117 MPa at 1800°C. This article is protected by copyright. All rights reserved

Fabrication of Textured Si3N4 Ceramics with Β-Si3n4 Powders As Raw Material by Gel-Casting under Strong Magnetic Field

Effect Of Beta-Si3n4 Initial Powder Size On Texture Development Of Porous Si3n4 Ceramics Prepared By Gel-Casting In A Magnetic Field

Preparation of C-Axis Textured SiC Ceramics by a Strong Magnetic Field of 6 T Assisted Gel-Casting Process

Effect of Sintering Conditions on Texture Formation of Si3N4 Ceramic Shaped Up in a Strong Magnetic Field

Effect of Seed Particles Content on Texture Formation of Si 3 N 4 Ceramics by Gel-Casting in a Strong Magnetic Field

Effect Of The Initial Time Of Polymerization On Texture Of Si3n4 Ceramics In A Strong Magnetic Field

Preparation of textured porous Al2O3 ceramics by slip casting in a strong magnetic field and its mechanical properties

Microstructure and Properties of Porous Si3N4 Ceramics Fabricated by Gelcasting

Effect of Pure Β-Si3n4powder on Microstructure and Mechanical Properties of Porous Si3N4ceramics

Alumina Ceramic Texturing Induced by High Magnetic Field and Its Microstructure

Fabrication, Structure and Properties of Porous SiC Ceramics with High Porosity and High Strength

Enhanced high‐temperature strength in textured (Ti1/3Zr1/3Hf1/3)B2 medium‐entropy ceramics via strong magnetic field

Sintering of β-Si_3N_4 Powder and Thermal Conductivity of the Ceramic

Fabrication of textured (Hf0.2Zr0.2Ta0.2Cr0.2Ti0.2)B2 high-entropy ceramics

The Evolution of Cube Texture in Directionally Solidified Fe-3.0 wt. % Si Alloy Assisted by a High Static Magnetic Field

Texture Genetics and Magnetic Properties of Fe-6.5%Si Materials Modified with Cu

Preparation of <i>In Situ</i> Synthesized SiC Particles Reinforced Highly Porous Si<sub>3</sub>N<sub>4</sub> Ceramics by Gel-Casting

Preparation of in-situ synthesized SiC particles reinforced highly porous Si3N4 ceramics by gel-casting

New perspective on the texture evolution mechanism of Si3N4 ceramics: Effect of additive content

Synthesis and Mechanical Properties of Highly Porous Ultrafine-Grain Si3N4 Ceramics Via Carbothermal Reduction-Nitridation Combined with Liquid Phase Sintering

Porous textured ceramics with controlled grain size and orientation