Abstract:We performed molecular dynamics simulations to study the nano-grinding process of copper-silicon with a single diamond abrasive grain. The Cu-Si model was based on the modified embedded-atom method. The effects of grinding depth, speed, and Cu thickness on material removal, defects, grinding forces, and temperature were analyzed based on dislocations and phase transitions. Our results show that effects of the interface emerge at a 4.3-nm Cu layer. Shockley dislocations extend from the ground surface to the Cu-Si interface, accompanied by formation of hexagonal-close-packed (HCP) Cu. Shockley dislocations, which lead to the HCP transition, clearly increase at a grinding depth of 4.3 nm. The phase transitions from the face-centered cubic to body-centered cubic structures are accompanied by an increase in the atomic kinetic energy. Kinetic energy is released as material recovers from elastic deformation. At high absorbed energies of 7.3 eV/atom potential and 4.4 eV/atom kinetic, the HCP structure is formed between the body-centered cubic and face-centered cubic phases. For the thinner Cu layer (2.2 nm), as the grinding depth gets closer to the Cu-Si interface, more chips form, causing the tangential forces to increase sharply, whereas the normal forces remain almost unchanged. Within a grinding speed range of 40 and 120 m/s, there is a linear positive correlation between the grinding temperature and the speed. The workpiece temperature rises by approximately 30 K for every 20 m/s increase in the speed.

Grain Coarsening Behavior in a Nanocrystalline Copper Subjected to Sliding Friction

Grain Coarsening During Compression of Bulk Nanocrystalline Nickel and Copper

Wear Behaviour and Microstructural Changes of SiCw-Al Composite under Unlubricated Sliding Friction

Grain Coarsening in Nanocrystalline Copper with Very Small Grain Size During Tensile Deformation

Rapid Stress-Driven Grain Coarsening in Nanocrystalline Cu at Ambient and Cryogenic Temperatures

Mechanisms of near-surface structural evolution in nanocrystalline materials during sliding contact

Mechanically-induced Grain Coarsening in Gradient Nano-Grained Copper

Formation of Thick Nanocrystalline Surface Layer on Copper During Oscillating Sliding

Grain coarsening of nano laminated structure in martensite steel under sliding wear

Microstructural evolution of pure copper subjected to friction sliding deformation at room temperature

A low-to-high friction transition in gradient nano-grained Cu and Cu-Ag alloys

Diffusive crack-grain interplay in freestanding nanocrystalline silver thin film

Surface nanocrystallization of Cu and Ta by sliding friction

Grain Refinement in Surficial Cryogenic Grinding

Dynamic Recrystallization Dominated Wear Mechanism of Nanostructured Cu

Effect of Counterface Materials on Dynamic Recrystallized Structure and Wear Resistance of Nanostructured Cu

Nanocrystalline Grain Structures Developed in Commercial Purity Cu by Low-Temperature Cold Rolling

A Molecular Dynamic Study of Nano-Grinding of a Monocrystalline Copper-Silicon Substrate

Effects of Normal Stress, Surface Roughness, and Initial Grain Size on the Microstructure of Copper Subjected to Platen Friction Sliding Deformation

An Elastic–viscoplastic Model of Deformation in Nanocrystalline Metals Based on Coupled Mechanisms in Grain Boundaries and Grain Interiors

Simultaneous Grain Growth and Grain Refinement in Bulk Ultrafine-Grained Copper under Tensile Deformation at Room Temperature