Abstract:An innovative process for preparing silicon carbide (SiC) from acid leaching residue of ferronickel slag through a carbon–thermal reduction process was proposed in this study. The results indicate that the acid leaching residue is an ideal silicon source for SiC preparation according to its high amorphous silica content of 84.20% and fine particle size of d50 = 29.16 μm. Compared with carbon black, activated carbon, and graphite, coke is the more appropriate carbon source for SiC preparation. A micron-size SiC powder with grade of 88.90% and an average particle size (d50) of 44.68 μm can be obtained under the following conditions: the mass ratio of coke to leaching residue as 1.2:1, in an air atmosphere, reducing at 1600 °C for 3 h, following by decarbonizing at 700 °C for 4 h. The XRD, SEM and FTIR analyses show that the prepared powder is 3C-SiC and belongs to the β-SiC crystal type. Based on thermodynamic analysis and micromorphology observation, it can be concluded that with amorphous silica as the silicon source, the carbon–thermal synthesis of SiC powder follows both the solid–solid reaction mechanism and the gas–solid mechanism. The SiC created through solid–solid reaction is primarily nucleated in situ on amorphous SiO2, with a size close to that of the original acid-leaching slag, while the SiC generated according to the gas–solid mechanism mainly nucleates heterogeneously on the surface of carbon particles, resulting in a smaller particle size and mostly adhering to the surface of solid–solid nucleated SiC particles. This study provides a feasible method for the effective utilization of amorphous silica, which is also significant for the efficient consumption of the vast acid leaching residue.

Preparation of SiC Powders by Utilizing Rice Husk Ash from Biomass Cogeneration Plant

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Effect of temperature on the ability to synthesize SiC from rice husks

PREPARATION OF HIGH-PURITY WHITE CARBON BLACK BY RICE HUSK ASH FROM BIOMASS POWER PLANT

Silicon Carbide-based Materials from Rice Husk

Experimental Study on Preparation of Amorphous SiO2 by Fluidized Bed Combstion of Rice Husk

Synthesis and Characterization of Si/SiO2/SiC Composites Through Carbothermic Reduction of Rice Husk-based Silica

Preparation of SiC Powders by Carbothermal Reduction with Bamboo Charcoal As Renewable Carbon Source

SiC Powders Prepared from Fly Ash

Synthesis of silica and carbon-based nanomaterials from rice husk ash by ambient fiery and furnace sweltering using a chemical method

Rapid Synthesis of SiC Powders by Spark Plasma-Assisted Carbothermal Reduction Reaction

Fabrication and Mechanical Properties of SiCw(p)/SiC-Si Composites by Liquid Si Infiltration using Pyrolysed Rice Husks and SiC Powders as Precursors

Coproduction of silicon nitride & oxynitride whiskers and precipitated silica from industrial rice husk ash

Mechano-chemical conversion of rice husk ash and gasifier-derived rice husk ash into porous silicon

In-situ synthesis of SiC nanowires on biomass carbon materials derived from cherry stones

Simultaneous Synthesis of Silica Polymorphs and Activated Carbon from Rice Husk

Preparation of Silicon Carbide Using Bamboo Charcoal As Carbon Source

Preparation of Silicon Carbide Powder from Amorphous Silica and Investigation of Synthesis Mechanism

Recycling of carbonized rice husk for producing high purity silicon by the combination of electric arc smelting and slag refining

Synthesis of Silicon Carbide Nanopowder Using Silica Fume

High Yield Silicon Carbide Whiskers from Rice Husk Ash and Graphene: Growth Method and Thermodynamics