Abstract:High purity silicon carbide (SiC) powder was synthesized in-situ by chemical reaction between silicon and carbon powder. In order to ensure that the impurity concentration of the resulting SiC powder is suitable for high-resistivity SiC single crystal growth, the preparation technology of SiC powder is different from that of SiC ceramic. The influence of the shape and size of carbon particles on the morphology and phase composition of the obtained SiC powder were discussed. The phase composition and morphology of the products were investigated by X-ray diffraction, Raman microspectroscopy and scanning electron microscopy. The results show that the composition of resulting SiC by in-situ synthesis from Si/C mixture strongly depends on the nature of the carbon source, which corresponds to the particle size and shape, as well as the preparation temperature. In the experimental conditions, flake graphite is more suitable for the synthesis of SiC powder than activated carbon because of its relatively smaller particle size and flake shape, which make the conversion more complete. The major phase composition of the full conversion products is belta-SiC, with traces of alpha-SiC. Glow discharge mass spectroscopy measurements indicated that SiC powder synthesized with this chemical reaction method can meet the purity demand for the growth of high-resistivity SiC single crystals.

Rapid Synthesis of SiC Powders by Spark Plasma-Assisted Carbothermal Reduction Reaction

Studies of synthesizing the SiC nanometer powders by chemical vapor reaction

Synthesis of High Purity SiC Powder for High-resistivity SiC Single Crystals Growth

Synthesis of nanocrystalline silicon carbide powders

Preparation of SiC Powders by Carbothermal Reduction with Bamboo Charcoal As Renewable Carbon Source

Effect of the SiC powder microscopic morphology on properties of Si/SiC ceramics prepared by spark plasma sintering

A New Rapid Reduction−Carbonization Route to Nanocrystalline Β-Sic

Sintering of ultrafine SiC powders prepared by plasma CVD

Preparation Of Nanocrystalline Silicon Carbide Powders By Carbothermal Reduction

Synthesis and investigation of the physicochemical properties of polymorphic 3C–SiC

Synthesis of fine grain Ti3SiC2 by spark plasma sintering with additive of aluminum

Controlled growth of SiC crystals in combustion synthesis

Rapid and cost-effective fabrication of SiC from Si scrap through flash sintering

Preparation of β-Sialon /SiC composite powder by carbothermal reaction of coal-mine schist

Synthesis of Silicon Nitride/Silicon Carbide Nanocomposite Powders through Partial Reduction of Silicon Nitride by Pyrolyzed Carbon

Structure and Properties of Spark Plasma Sintered SiC Ceramics with Oxide Additives

Preparation of porous SiC-ceramics by sol–gel and spark plasma sintering

Preparation and Sinterability of Submicron Titanium Carbide Powders Synthesized with Phenolic Resin As Carbon Source by Carbothermal Reduction

Synthesis and characterization of submicron silicon carbide powders with silicon and phenolic resin

Carbothermally prepared nanophase SiC/ Si3N4 composite powders and densified parts