Abstract:Sintering behaviour of ashes from combustion of coal and biomass blends was experimentally investigated with a focus on the effect of ash preparation method. Blends of a Chinese anthracite, Jincheng coal, and two biomass materials, a wheat straw and a pine sawdust, respectively, were subjected to three different ash preparation procedures, namely, a low temperature oxygen plasma ashing device operating at ca 150 degrees C, combustion in a Muffle furnace at 815 degrees C and in a drop tube furnace at 1500 degrees C. The resulting ash samples were then subjected to the sintering temperature measurement using a pressure-drop sintering device, morphological and mineralogical characterisation using scanning electron microscope (SEM) fitted with X-ray energy dispersive spectroscopy (EDS) and X-ray diffractometry analyser (XRD), respectively. For the same coal and biomass blends but different ash preparation methods, the sintering temperatures were always the lowest for the ash samples from the plasma ashing device and the highest from drop tube furnace. SEM imaging showed that the texture of ash samples from the plasma ashing device was irregular, loose and more fibrous, indicating little interactions among the different mineral and inorganic constituents in the individual fuels. The muffle furnace and drop tube furnace ashes were denser and more uniform in shape as the mineral matter and inorganics became fused together. In addition, the drop tube furnace ashes were mostly in spherical-shape, indicating ash melting had occurred during combustion. The XRD analysis revealed that different minerals were present in the ash samples due to different ash preparation temperatures, with high temperature minerals present in the drop tube furnace ash. Biomass addition in the blends lowered the sintering temperature of corresponding ash; the higher the proportion of biomass in the blend, the lower the ash sintering temperature regardless the ashing method. At the same biomass addition ratio, the ash sintering temperature of the blend with the wheat straw addition was lower than that with the pine sawdust addition, because the wheat straw had a higher K and Cl content but lower Ca than the pine sawdust. The EDS and XRD analyses confirmed that the ashes of coal/wheat straw blends contained more K-bearing minerals, while the ashes of the coal/pine sawdust contained more Ca and K-bearing minerals. Both Ca and K-bearing minerals reacted with other minerals in the ash to form low temperature eutectics, leading to the reduction of sintering temperatures of the coal and biomass blends. However, the melting points of the K-containing minerals are higher than the Ca-containing minerals, therefore, the sintering temperatures of ash with the wheat straw addition were lower than those with the pine sawdust addition. (C) 2016 Elsevier Ltd. All rights reserved.

PREPARATION OF HIGH-PURITY WHITE CARBON BLACK BY RICE HUSK ASH FROM BIOMASS POWER PLANT

Preparation of highly dispersed nanosilica from rice husk by aprecipitation method combined with high pressure homogenization

The preparation of silica white from fly ash and its characterization

Recovery of silica and carbon black from rice husk ash disposed from a biomass power plant by precipitation method

Kinetic study on the preparation of silica from rice husk under various pretreatments

Experimental Study of White Carbon Black Prepared from Quartz

Coproduction of silicon nitride & oxynitride whiskers and precipitated silica from industrial rice husk ash

Silica White Obtained from Rice Husk in a Fluidized Bed

Experimental study on the color characteristics of rice husk ash

Preparation method of white carbon black

Effect of Ash Preparation Method on the Sintering Characteristics of Ashes from Combustion of Coal and Biomass Blends

Fabrication Of Sio2 Porous Ceramics From Rice Husk Ash

Preparation of Activated Carbon from Pyrolyzed Rice Husk by Leaching out Ash Content after CO2 Activation

Recycling of carbonized rice husk for producing high purity silicon by the combination of electric arc smelting and slag refining

A Detailed Study of the Effects of Pyrolysis Temperature and Feedstock Particle Size on the Preparation of Nanosilica from Rice Husk

Mechano-chemical conversion of rice husk ash and gasifier-derived rice husk ash into porous silicon

Production of Amorphous Rice Husk Ash in a 500 Kw Fluidized Bed Combustor

Studying the kinetics of extraction treatment of rice husk when obtaining silicon carbide

Micro- and Mesoporous-Enriched Carbon Materials Prepared from a Mixture of Petroleum-Derived Oily Sludge and Biomass

Desulfurization and Denitrification Performance of Modified Rice Husk Ash-Carbide Slag Absorbent

Preparation and Performance Analysis of New Multi stage Porous Carbon Materials for Air Pollution Treatmentials on Atmospheric Pollution Sources under the Background of Carbon Peak and Carbon Neutrality