Abstract:The research on and application of electric fields to promote the rapid infiltration of ions into cement concrete have been widely explored. Still, there are few studies on the migration of sulfate ions using electric fields. In this paper, a new test method is designed using the principle of electric fields, that is, to accelerate the attack of sulfate into concrete under the action of the electric field, to test the resistance of concrete to sulfate attack. By testing different water–cement ratios, different pulse frequencies, different ages, and different soaking environments, the influence of the electric field on the sulfate resistance of concrete was analyzed. The results show that the compressive strength of concrete in a sulfate attack environment is smaller than that of conventional attack and water immersion environment when the water–cement ratio is 0.3, 0.4, and 0.5 under the action of the electric field and increases with the increase of water in the water–cement ratio. Compared with a 14 day test, the compressive strength of concrete in a sulfate attack environment decreased by 1.9%, 8.6%, and 2.9%, respectively, at 28 days, which was faster than that of conventional attack and water immersion. The compressive strength of the concrete in the sulfate attack environment during the full immersion test and the semi-immersion test is smaller than that of the conventional attack and water immersion, and the semi-immersion test method is more obvious than the full immersion test method. The microscopic morphology of the test group, the water group, and the solution group were compared. From the microscopic morphology comparison, it can be seen that the electric field accelerates the diffusion of sulfate ions into the cement concrete and accelerates the reaction of sulfate ions with the relevant components in the cement concrete. Given the demand for concrete to resist sulfate attack under the action of the electric field, developing new and efficient protective materials is an important research direction. At present, the market lacks protective materials specifically for such an attack environment. This paper provides the theoretical basis and technical support for improving the effectiveness of concrete surface protection technology and engineering practices.

Determination of Sulfate Concentration of Soil Used for Assessment of the Sulfate Attack to Concrete

Sulphate attack resistance of high-performance concrete under compressive loading

Measurement of Sulfate-ion Content in Concrete Attacked by Sodium Sulfate

Compressive Strength Assessment of Sulfate-Attacked Concrete by Using Sulfate Ions Distributions

Systemical Investigation on the Determination of Sulfate in Cement-Based Materials Based on a Promoted Conductometric Titrator

Evaluating Deterioration of Concrete by Sulfate Attack

Study on Test of Free and Total SO 4 2in Cement-Based Materials Subjected to Sulfate Attack by Conductivity Titration

Study on Test of Free and Total SO42- in Cement-Based Materials Subjected to Sulfate Attack by Conductivity Titration

RESEARCH ON MECHANISM OF SULFATE ATTACK ON CONCRETE BY TG-DSC METHOD

Application of Non-Destructive Technology in Evaluating Concrete to Sulfate Attack

Reliability assessment of concrete under external sulfate attack

Determination of Sulfate Content in OPC and CSA Cement by Sodium Carbonate Extraction Method

Study on the Optimal Conductivity Titration Parameters for SO42- in Cement-Based Materials

Risk Assessment and Diagnostic Method of Sulfate Attack of Cement-Based Material

Research on Corrosion Effect of Sulfate Ions on Concrete under Wetting-Drying Cycle

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Study on the Attack of Concrete by External Sulfate under Electric Fields

Experimental and Numerical Study of the Effects of Solution Concentration and Temperature on Concrete under External Sulfate Attack

Influence mechanisms under different immersion methods and different strengths of concrete in corrosive environments, and verification via long-term field test

Sulfate Ion Diffusion Test of Recycled Aggregate Concrete with Different Replacement Ratio

Effect of dry–wet ratio on pore-structure characteristics of fly ash concrete under sulfate attack