Abstract:The harsh geological conditions in the northwest region of China, characterized by widespread saline-alkali soil rich in alkali ions, pose a high risk of Alkali-Silica reaction (ASR) in concrete, particularly due to the presence of ASR-active natural river sands. To address ASR hazards, locally applied concrete often employs High-Performance concrete (HPC) prepared with high proportions of mineral admixtures. In this paper, the alkali content is controlled by adding mixed water with NaOH to the initial configuration of concrete, and three different alkali content states are set up. A 1 mol/L NaOH solution was used to simulate alkaline conditions, and HPC specimens were immersed for an extended period to investigate the effects of equivalent alkali content, immersion time, concrete strength, and admixture on the flexural mechanical properties of HPC under the condition of long-term alkali immersion. Results indicate that, the strength grade was positively correlated with the flexural strength of HPC, but the alkali content was negatively. Initial immersion significantly enhances strength, followed by a gradual decline after long-term immersion. Among three types of admixture addition methods, the impact on flexural strength of HPC immersed in alkaline solution for 10 years follows the order: Double doped air entraining agent and rust inhibitor is greater than single doped air entraining agent is greater than single doped rust inhibitor. In the process of macroscopic test, it is difficult to observe the variation rule of stress and strain in detail, only the final aggregate failure mode can be analyzed. In order to analyze the strain change of the specimen and the failure process of the aggregates more accurately, a three-dimensional random aggregate concrete mesoscopic model was established, and equations relating microhardness to the mechanical properties of concrete components were derived from statistical analysis, providing a basis for parameter selection in the model. Results demonstrate that with increasing strength, the occurrence time of initial cracks is delayed, and the ratio of cracks bypassing aggregates (cracks develop along the ITZ between aggregate and mortar until complete failure) decreases, and the ratio of cracks penetrating aggregates (cracks develop directly through aggregates in an almost vertical direction) increases.

Sulphate attack resistance of high-performance concrete under compressive loading

Performances of UHPC Bonded Cementitious Composite Systems Containing Styrene-Butadiene Rubber Latex in a Chloride-Rich Environment

Synergistic effects of sustained loading and sulfate attack on the damage of UHPC based on lightweight aggregate

Analysis of High Performance Concrete Mixed with Nano-Silica in Front of Sulfate Attack

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Assessment of Mechanical Properties and Damage of High Performance Concrete Subjected to Magnesium Sulfate Environment

Sulfate resistance of ultra-high performance concrete with recycled fine aggregate

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Deterioration Mechanisms of Ultra-High-Performance Concrete Under Various Sulfuric Acid and Sulfate Attack Conditions

Influence of the Initial Moist Curing Time on the Sulfate Attack Resistance of Concretes with Different Binders

Sulphate Corrosion Mechanism of Ultra-High-Performance Concrete (UHPC) Prepared with Seawater and Sea Sand

Relationship Between Microscopic Pore Structure and Strength of Cement-Based Materials with Low Water-Binder Ratio Under Sulfate Attack Environment

Durability of self-consolidating concrete to different exposure regimes of sodium sulfate attack

The Effect of Cement and Admixture Types on the Resistance of High Performance Concrete to Internal Sulphate Attack

Experimental investigation on the fracture properties of concrete under different exposure conditions

Study on the Resistance of Concrete to High-Concentration Sulfate Attack: A Case Study in Jinyan Bridge

The flexural mechanical properties and mesoscopic mechanisms of fracture failure of HPC with ASR inhibition measures under prolonged alkaline solution immersion

Effects of Sodium Sulfate Attack on Concrete Incorporated with Drying-Wetting Cycles

Concrete Deterioration Mechanisms under Combined Sulfate Attack and Flexural Loading

Research on the Sulfate-resistant Chemical Attack Mechanism of Concrete with Mineral Admixture

Form and mechanism of sulfate attack on cement-based material made of limestone powder at low water-binder ratio under low temperature conditions