Abstract:In order to study the durability of concrete materials subjected to sulfate attack, in a sulfate attack environment, a series of concrete tests considering different fly ash contents and erosion times were conducted. The mechanical properties and the micro-structure of concrete under sulfate attack were studied based on the following: uniaxial compressive strength test, split tensile test, ultrasonic impulse method, scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanical properties were compressive strength, splitting tensile strength, and relative dynamic elastic modulus, respectively. Additionally, according to the damage mechanical theory, experimental results and micro-structure analysis, the damage evolution process of concrete under a sulfate attack environment were studied in detail. Finally, according to the sulfate attack time and fly ash content, a damage model of the sulfate attack of the binary surface was established. The specific results are as follows: under the action of sulfate attack, the change law of the rate of mass change, relative dynamic modulus of elasticity, corrosion resistance coefficient of compressive strength, and the corrosion resistance coefficient of the splitting tensile strength of concrete all increase first and then decrease. Under the same erosion time, concrete mixed with 10% fly ash content has the best sulfate resistance. Through data regression, the damage evolution equation of the sulfate attack was developed and there is an exponential function relationship among the different damage variables. The binary curved surface regression effect of the concrete damage and the erosion time and the amount of fly ash is significant, which can predict deterioration of concrete damage under sulfate attack. During the erosion time, the combined expansion of ettringite and gypsum caused micro cracks. With an increase of corrosion time, micro cracks developed and their numbers increased.

Influence of the Initial Moist Curing Time on the Sulfate Attack Resistance of Concretes with Different Binders

Sulphate attack resistance of high-performance concrete under compressive loading

Research on the Sulfate-resistant Chemical Attack Mechanism of Concrete with Mineral Admixture

Effect of Curing Time on the Surface Permeability of Concrete with a Large Amount of Mineral Admixtures

Influence of Early-Age Moist Curing Time on the Late-Age Properties of Concretes with Different Binders

Influence of High-Volume Mineral Mixtures and the Steam-Curing Temperatures on the Properties of Precast Concrete

Mechanical Properties and Damage Evolution of Concrete Materials Considering Sulfate Attack

Effect of dry–wet ratio on pore-structure characteristics of fly ash concrete under sulfate attack

Sulfate attack on concrete with mineral admixtures

Experimental study of the deterioration mechanism of concrete under sulfate attack in wet-dry cycles

Effects of Sodium Sulfate Attack on Concrete Incorporated with Drying-Wetting Cycles

Investigating the sulfate resistance of mortars with multiple mineral admixtures in ammonium-magnesium sulfate solution

Effect of sulfate attack on multiple interfacial transition zones of high-belite sulfoaluminate cement recycled concrete

Experimental Study and Evaluation of Bonding Properties Between Fiber and Cement Matrix under Sulfate Attack

The Resistance of Novel Concrete Prepared by Gap-Graded Blended Cement under Chloride-Sulfate Attack

Influence mechanisms under different immersion methods and different strengths of concrete in corrosive environments, and verification via long-term field test

Influence of the coupled effect of stray current and sulfate upon chloride diffusing into concrete of underground structures

Degradation Mechanism of Concrete Subjected to External Sulfate Attack: Comparison of Different Curing Conditions

Influence of Fly Ash Content on the Durability of Mortar Specimens under Dry/Wet Sulfate Attack

Mechanical Properties and Chloride Penetration Resistance of Concrete Combined with Ground Granulate Blast Furnace Slag and Macro Synthetic Fiber

Study on the chloride ion binding rate of sulfoaluminate cement mortars containing different mineral admixtures