Abstract:Extensive improvements in small-scale thermal systems in electronic circuits, automotive industries, and microcomputers conduct the study of microsystems as essential. Flow and thermic field characteristics of the coherent nanofluid-guided microchannel heat sink are described in this perusal. The porous media approximate was used to search the heat distribution in the expanded sheet and Cu: γ - ALOOH/Water. A hybrid blend of Boehme copper and aluminum nanoparticles is evaluated to have a cooling effect on the microchannel heat sink. By using Akbari Ganji and finite element methods, linear and non-linear differential equations as well as simple dimensionless equations have been analyzed. The purpose of this study is to investigate the fluid and thermal parameters of copper hybrid solution added to water, such as Nusselt number and Darcy number so that we can reach the best cooling of the fluid. Also, by installing a piece of fin on the wall of the heat sink, the coefficient of conductive heat transfer and displacement heat transfer with the surrounding air fluid increases, and the efficiency of the system increases. The overall results show that expanding values on the NP (Series heat transfer fluid system maximizes performance with temperatures) volume division of copper, as well as boehmite alumina particles, lead to a decrease within the stream velocity of the Cu: ALOOH/Water. Increasing the volume fraction of nanoparticles in the hybrid mixture decreases the temperature of the solid surface and the hybrid nanofluid. The Brownian movement improves as the volume percentage of nanoparticles in the hybrid mixture grows, spreading heat across the environment. As a result, heat transmission rates rise. As the Darcy number increases, the thermal field for solid sections and Cu: ALOOH/Water improves.

A Method of the Inverse Evaluation for Heat Transfer Coefficient between Al-Cu Alloys and Cooling Water

Experimental Investigation of Spray Cooling Performance in Non‐boiling Zone on Rough Superhydrophilic/hydrophobic Surfaces

A FEM-Based Inverse Calculation Method for Determination of Heat Transfer Coefficient in Liquid Quenching Process

Experimental study of heat-transfer coefficient of Al-Zn-Mg-Cu ultra-thick hot plate during multi-stage quenching

Analytical and Computational Method of Heat Transfer Coefficient Using FEM-based Algorithm

Evaluation of interfacial heat transfer coefficient based on the experiment and numerical simulation in the air-cooling process

A Discretized and Analytical Method of Heat Transfer Coefficient During Quenching of Aluminum Alloy Plate

Study of the Thermal-Hydraulic Characteristics of a Printed Circuit Heat Exchanger Using a Novel Iterative Inversion Method Combined with Genetic Algorithm

Solution and Validation of Heat Conduct Equation for Aluminum Alloy Ultra-thickness Plate During Quenching

Inverse Solution to Heat Transfer Coefficient During Heat Assembly of Aluminum Alloy Drill Pipes

The Measurement and Calculation of Heat Transfer Coefficient under Different Cooling Conditions

Solution of Heat Transfer Coefficient During Quenching Process of Honeycomb Thin Aluminum Plate

Solution of boundary heat transfer coefficients between hot stamping die and cooling water based on FEM and optimization method

Thermal Simulation on Surface Heat Transfer Coefficient During Quench of 7050 Al Alloy by Water Spraying

Inverse problem-coupled heat transfer model for steel continuous casting

Heat transfer coefficient during cooling water of continuous casting of aluminum alloy

Determination of Heat Transfer Coefficient by Inverse Analyzing for Selective Laser Melting (SLM) of AlSi10Mg

Calculation and Experimental Research of Heat Transfer Coefficient in Atomized Gas Quenching Process

A Nonlinear Solution of Inverse Heat Conduction Problem for Obtaining the Inner Heat Transfer Coefficient

Computer simulation of Cu: ALOOH/Water in a microchannel heat sink using a porous media technique and solved by numerical analysis AGM and FEM

Determination of surface heat transfer coefficient via inverse heat transfer model based on DEFORM software