Abstract:Heat transfer model is the basis for control and optimization of continuous casting of steel. In this paper, a three dimensional (3D) real-time heat transfer model has been presented for continuous casting blooms, especially for the initial and final casting stages. To be real-time, an algorithm based on inheritable variable non-uniform grid and variable time steps has been developed, accelerating the 3D heat transfer model by 110-200 times. Meanwhile, the discrete parameters including grid and time step have been optimized, and the influence of central processing units (CPUs) and programming languages has also been studied. Then the relative calculation time, which is the ratio of calculation time to physical time, has been reduced to 0.62 while numerical errors are within 0.74%. Further, to reduce the uncertainty of the model, the machine-dependent parameters appearing in the thermo-physical properties and the boundary conditions have been calibrated with measurements of surface temperature by thermometer and shell-thickness by nail-shooting, then the corresponding optimization problem of minimizing the errors between calculation and measurements has been solved by particle swarm optimization algorithm. After calibration, the model's uncertainty has been obviously reduced. Finally, the calibrated model has been verified by online surface temperature measurement and it shows good agreement as the errors between calculation and measurements are less than +/- 10 degrees C.

Inverse problem-coupled heat transfer model for steel continuous casting

3D Transient Heat Transfer Simulation and Optimization for Initial Stage of Steel Continuous Casting Process

Determining the Heat Transfer Coefficient During the Continuous Casting Process Using Stochastic Particle Swarm Optimization

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

Positive Online Calibration of Heat Transfer Model for Continuous Casting of Steel Based on Surface Temperature Measurement

Applying of Real-time Heat Transfer and Solidification Model on the Dynamic Control System of Billet Continuous Casting

Heat Transfer Simulation for Covers in Continuous Casting Process of Steel and Its Application

A New Method for Determining Transient Interfacial Heat Transfer Coefficients in Horizontal Continuous Casting

Computational modeling and control system of continuous casting process

Laboratory Experimental Setup And Research On Heat Transfer Characteristics During Secondary Cooling In Continuous Casting

Simulation and application of dynamic heat transfer model for improvement of continuous casting process

Determination Of The Interface Heat Transfer For The Investment Castings Of Aerofoil-Shaped Turbine Blades Using Optimization And Fe Method

Optimization Control for Solidification Process of Secondary Cooling in Continuous Casting Steel

Nature inspired algorithms for the solution of inverse heat transfer problems applied to distinct unsteady heat flux orientations in cylindrical castings

Temperature Distribution and Dynamic Control of Secondary Cooling in Slab Continuous Casting

Modeling And Simulating For The Temperature Field In Casting Tip During Continuous Roll Casting

Prediction method of surface heat transfer coefficients of secondary cooling area for continuous casting slab

Mathematical Heat Transfer Model Research for the Improvement of Continuous Casting Slab Temperature

Finite difference heat-transfer modeling for continuous casting

Research and Development of Secondary Cooling Heat Transfer Model for Baosteel 1930 Mm Slab Continuous Casting

Evolution of Control Models for Secondary Cooling in Continuous Casting Process of Steel