Abstract:Heat transfer model is the basis for control and optimization of continuous casting of steel. In this paper, a three dimensional (3D) real-time heat transfer model has been presented for continuous casting blooms, especially for the initial and final casting stages. To be real-time, an algorithm based on inheritable variable non-uniform grid and variable time steps has been developed, accelerating the 3D heat transfer model by 110-200 times. Meanwhile, the discrete parameters including grid and time step have been optimized, and the influence of central processing units (CPUs) and programming languages has also been studied. Then the relative calculation time, which is the ratio of calculation time to physical time, has been reduced to 0.62 while numerical errors are within 0.74%. Further, to reduce the uncertainty of the model, the machine-dependent parameters appearing in the thermo-physical properties and the boundary conditions have been calibrated with measurements of surface temperature by thermometer and shell-thickness by nail-shooting, then the corresponding optimization problem of minimizing the errors between calculation and measurements has been solved by particle swarm optimization algorithm. After calibration, the model's uncertainty has been obviously reduced. Finally, the calibrated model has been verified by online surface temperature measurement and it shows good agreement as the errors between calculation and measurements are less than +/- 10 degrees C.

Nature inspired algorithms for the solution of inverse heat transfer problems applied to distinct unsteady heat flux orientations in cylindrical castings

Inverse Approach Using Bio-Inspired Algorithm Within Bayesian Framework for the Estimation of Heat Transfer Coefficients During Solidification of Casting

Performance Analysis of Metaheuristic Optimizers on the Estimation of the Interfacial Heat Transfer Coefficient in Aluminum–Silicon Permanent Mold Casting

Determining the Heat Transfer Coefficient During the Continuous Casting Process Using Stochastic Particle Swarm Optimization

Determination Of The Interface Heat Transfer For The Investment Castings Of Aerofoil-Shaped Turbine Blades Using Optimization And Fe Method

Investigating the suitability of using a single heat transfer coefficient in metal casting simulation: An inverse approach

The use of artificial intelligence technique for the optimisation of process parameters used in the continuous casting of steel

Inverse problem-coupled heat transfer model for steel continuous casting

Performance Analysis of Metaheuristic Optimization Algorithms in Estimating the Interfacial Heat Transfer Coefficient on Directional Solidification

An Inverse Estimation of Frozen Sand Mold-Melt Heat Transfer Coefficient in the Solidification of A356 Alloy

Finite difference heat-transfer modeling for continuous casting

INVERSE CALCULATION OF INTERFACIAL HEAT TRANSFER COEFFICIENTDURING SOLIDIFICATION OF CIRCULAR CAST STEEL CASTINGS BY NO-BAKE FURANRESIN BONDED SAND CASTING

Hybrid approach for solution of inverse heat conduction problems

A New Method for Determining Transient Interfacial Heat Transfer Coefficients in Horizontal Continuous Casting

Determination of Interfacial Heat Transfer Coefficient at the Frozen Sand Mold Casting Process of ZL101 Alloy

Estimating Non-Linear Heat Flux in Continuous Billet Casting Process With Limited Sensors

Novel Methodologies for Solving the Inverse Unsteady Heat Transfer Problem of Estimating the Boundary Heat Flux in Continuous Casting Molds

A Three Dimensional Real-time Heat Transfer Model for Continuous Casting Blooms

A novel approach to solve inverse heat conduction problems: Coupling scaled boundary finite element method to a hybrid optimization algorithm

Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy

Application of Orthogonal Experimental Design and Tikhonov Regularization Method for the Identification of Parameters in the Casting Solidification Process