Abstract:Pressure casting process, which is based on the principle of filling and solidifying the liquid metal into the mold cavity with the effect of speed and pressure, enables to obtain a serial product. The pressure casting process usually involves a thermal process. Starting with the casting process, the thermal resistances, especially formed at the casting mold interface, and the resultant interfacial heat transfer coefficient (IHTC) are among the most important factors determining the mechanical and physical properties of the produced part. The IHTC depends on the mold temperature, casting temperature, injection pressure, injection rate, vacuum application and many other incalculable parameters. In this study, it was aimed to determine the heat transfer coefficient and heat flux of the casting mold interface which has a significant effect on the quality of parts in the pressure casting of cylindrical mold geometry of AlSi<sub>8</sub>Cu<sub>3</sub>Fe aluminum alloy. The study was carried out depending on different casting temperatures, injection pressure, injection speed and vacuum application to the mold cavity. Temperatures were measured with thermocouples placed in the mold and casting material, IHTC and heat flux were calculated with finite difference method by using experimentally measured temperatures. In the application of artificial intelligence methods, casting temperature, injection speed, injection pressure and vacuum conditions are given as input parameters and interfacial flow coefficient and heat flux are accepted as output parameters. With the help of these parameters, DTR, MLR and ANNR deep learning algorithms were used to estimate the interfacial heat transfer coefficient. Among these algorithms, ANNR algorithm was found to be the most accurate estimating model at the rate of 99.9%. For the obtained model, a computer program was prepared for the users to be able to see and follow the experimental results and the results obtained from the model at the same time.

Performance Analysis of Metaheuristic Optimizers on the Estimation of the Interfacial Heat Transfer Coefficient in Aluminum–Silicon Permanent Mold Casting

Performance Analysis of Metaheuristic Optimization Algorithms in Estimating the Interfacial Heat Transfer Coefficient on Directional Solidification

Nature inspired algorithms for the solution of inverse heat transfer problems applied to distinct unsteady heat flux orientations in cylindrical castings

An Inverse Estimation of Frozen Sand Mold-Melt Heat Transfer Coefficient in the Solidification of A356 Alloy

An Internet of Things-enabled model-based approach to improving the energy efficiency of aluminum die casting processes

Determination of Interfacial Heat Transfer Coefficient at the Frozen Sand Mold Casting Process of ZL101 Alloy

Numerical Simulation and Optimization of Indirect Squeeze Casting Process

Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy

The use of artificial intelligence technique for the optimisation of process parameters used in the continuous casting of steel

Simulation-assisted Multi-Process Integrated Optimization for Greentelligent Aluminum Casting

Investigating the suitability of using a single heat transfer coefficient in metal casting simulation: An inverse approach

Investigation and Application of Inverse Determination of Interfacial Heat Transfer Coefficient in Vacuum Investment Casting

Determination of the Interfacial Heat Transfer Coefficient at the Metal-Sand Mold Interface in Low Pressure Sand Casting

Estimation of Casting Mold Interfacial Heat Transfer Coefficient in Pressure Die Casting Process by Artificial Intelligence Methods

Simulation-Based Multi-Criteria Optimization of Parallel Heat Treatment Furnaces at a Casting Manufacturer

Investigation of Solidification, Heat Transfer and Fluid Flow in Continuous Casting of Steel Using an Advanced Modeling Approach

Experimental Study on the Heat Transfer Behavior and Contact Pressure at the Casting-Mold Interface in Squeeze Casting of Aluminum Alloy

Optimizing heat source distribution in sintering molds: Integrating response surface model with sequential quadratic programming

A Study of the Interfacial Heat Transfer Between an Iron Casting and A Metallic Mould

Optimization of solidification in die casting using numerical simulations and machine learning

Study on Heat Transfer Behavior at Metal/Die Interface in Aluminum Alloy Die Casting Process - I. Experimental Study and Determination of the Interfacial Heat Transfer Coefficient