Abstract:For the 6063 aluminum alloy spray quenching process, respectively establish finite element model of upper, lower nozzle jet impact and water area and meshing in the Gambit. Import into fluent software for cooling numerical simulation, getting the upper and lower nozzle’s pressure contours , velocity contours , heat transfer coefficient curve and water area’s velocity contours and heat transfer coefficient curves. Analysis the various contours and the heat transfer coefficient along the aluminum plate surface radial distribution: upper nozzle’s heat transfer intensity is not in stationary point and near its both sides; Lower nozzle’s contours and heat transfer coefficient has a certain similarity with the upper nozzle, but the maximum heat transfer intensity is at stagnation point; Water area‘s heat transfer coefficient fall faster at the entrance and maintained at a constant value finally. Put heat transfer coefficient as a boundary condition into the ansys software to simulate the three dimensional temperature field of quenching process and analysis the temperature field contours in different time: the biggest speed is 36°C/s during the process of quenching, appearing in the high temperature range, namely deformation sensitive areas, therefore it most likely to occur deformation at the beginning of the quenching profiles.

Solution and Validation of Heat Conduct Equation for Aluminum Alloy Ultra-thickness Plate During Quenching

A Discretized and Analytical Method of Heat Transfer Coefficient During Quenching of Aluminum Alloy Plate

Solution of Heat Transfer Coefficient During Quenching Process of Honeycomb Thin Aluminum Plate

Compared Two Methods of Inverse Heat Transfer Coefficient for Thick-Plate Quenching

Numerical Simulation and Analysis of Process of 7000 Series Alloy Thick Plates Roller-Type Spray Quenching

6063 Aluminum Alloy Online Quenching Surface Heat Transfer Coefficient and the Temperature Field Simulation

Numerical Simulation of Residual Stress in Quenching 2024 Honeycomb Aluminum Alloy Thin Plates

Experimental study of heat-transfer coefficient of Al-Zn-Mg-Cu ultra-thick hot plate during multi-stage quenching

Numerical Analysis of Residual Stress Fields in Quenching 7075 Aluminum Alloy Thick Plates

Coupled Thermal-stress Numerical Simulation on Quenching of ZL205A Aluminum Alloy Thick-plate

Coupled Thermal-Mechanical Simulation on Quenching of Aluminum Alloy Thick-Plate Based on ANSYS

Coupled thermal-mechanical simulation on quenching of aluminum alloy H-shaped section plate reinforced part

Calculation of Thermal Stress Field with Non-Linear Surface Heat-Transfer Coefficient During Quenching

Study on Quenching of Aluminum Alloy Plate of Large-scale and Super-strength

Determination of surface heat transfer coefficient via inverse heat transfer model based on DEFORM software

Thermal Simulation on Surface Heat Transfer Coefficient During Quench of 7050 Al Alloy by Water Spraying

Numerical modeling of the heat treatment with residual heat of aluminum castings

Finite Element Modeling of Quenching Process of 2A12 Aluminum Block

Simulation of Temperature Field of Aluminum Alloy Super-thickness Plate During Hot Rolling

Numerical Calculation of Heat Transfer with Phase Transformation and Nonlinear Surface Heat-transfer Coefficients During Gas Quenching

Multi-zone multi-phase temperature field modelling of aluminum alloy workpieces in large-scale vertical quench furnaces