Abstract:This study develops a thermal homogenization model for an aluminum honeycomb panel using the representative volume element (RVE) concept, considering the orthotropic nature of the structure. The RVE thermal homogenization method is a numerical approach for analyzing heterogeneous materials. It employs a constitutive model based on RVE performance to represent thermal behavior. Effective parameters are determined through averaging techniques, and the finite element method solves the thermal problem, accounting for structure topology and material behavior. The resulting heat conduction problem is solved using the finite element method (FEM) to evaluate the effective thermal characteristics. A 3D RVE is generated based on the honeycomb panel's geometry, evaluating thermal conductivity tensor and describing the medium's thermal performance. Numerical tests validate the model by comparing it with the real honeycomb structure under sinusoidal heat flux. Results show good correlation, with maximum temperatures of 1101.9 °C in the real structure and 1096.4 °C in the medium. The homogeneous medium is further used to investigate thermal performance under convective conditions with varying panel thicknesses, achieving over 77 °C temperature reduction with the thickest panel. Natural vibration behavior is considered, demonstrating strong correlation between modal responses and natural frequencies. This modeling approach efficiently analyzes thermal behavior in large honeycomb structures, reducing computational time significantly.

Solution of Heat Transfer Coefficient During Quenching Process of Honeycomb Thin Aluminum Plate

Numerical Simulation of Residual Stress in Quenching 2024 Honeycomb Aluminum Alloy Thin Plates

Experimental study of heat-transfer coefficient of Al-Zn-Mg-Cu ultra-thick hot plate during multi-stage quenching

Study of Heat Conduction Transfer Functions of Fins

6063 Aluminum Alloy Online Quenching Surface Heat Transfer Coefficient and the Temperature Field Simulation

Coupled Thermal-stress Numerical Simulation on Quenching of ZL205A Aluminum Alloy Thick-plate

A FEM-Based Inverse Calculation Method for Determination of Heat Transfer Coefficient in Liquid Quenching Process

An Experimental Study of Heat Transfer During Forced Air Convection

Correlation of heat transfer coefficient in quenching process using ABAQUS

Experiment and finite element simulation of online quenching process for 6063 aluminum alloy

Heat transfer coefficient study for air quenching by expenriment and CFD modeling

Heat Transfer Coefficient of 7050 Aluminum Alloy under Different Quenching Medium Parameters

Cfd -Based Modelling On Inter Facial Heat Transfer For Water Quenching

Numerical Simulation of Temperature Field in 7050 Aluminum Alloy Plates During Its Cryogenic Treatment

Robust methodology for determination of heat transfer coefficient distribution in convection

Boiling and quenching heat transfer advancement by nanoscale surface modification

Heat transfer coefficient during cooling water of continuous casting of aluminum alloy

Surface Heat Transfer Coefficient’s Calculation and Analysis on Atmospheric High Speed Aerosol Quenching

Conjugate Heat Transfer Investigation of Trenched Film Cooling Characteristics

Multiscale homogenization of aluminum honeycomb structures: Thermal analysis with orthotropic representative volume element and finite element method

Heat transfer characteristics and cooling capacity of online quenching equipment for plate