Abstract:Automobile steering knuckle is an important part of the steering system, which is subjected to significant impacts and loads during its operation. Generally, cast aluminum steering knuckles are usually produced using some type of enhanced low-pressure casting process, like counter-pressure casting. Compared with aluminum forging and sand cast ductile iron, it can improve the production speed and achieve the adequate casting quality. In this study, various methodologies such as dynamic thermomechanical analysis, differential scanning calorimetry, and the laser flash method were employed to study the thermophysical properties of AlSi7Mg0.3. Further, the physical model of a counter-pressure casting system with an aluminum interior was established based on the combination of the tested and the theoretical properties of aluminum; this was achieved with the consideration of the presence of other factors including rapid solidification. The temperature field of the system was computed and verified by thermocouples at six different points during the tooling and the shrinkage simulation. It was observed that the plot shape of the computed temperatures and that of the simulated ones correlated; further, the difference between the peaks and the valleys was controlled to be 3% on an average, with the maximum variation of 7% at only one point. Moreover, all the predicted shrinkages were verified by the casting. This study provides a solid foundation for facilitating the simulation of the morphologies of the microstructure.

Numerical Simulation of Temperature Field in 7050 Aluminum Alloy Plates During Its Cryogenic Treatment

Experiments and numerical simulation of dynamic cool-down process of stainless steel plate in liquid nitrogen bath

Research on 3D Numerical Simulation and Experiment of Cutting Temperature for High Speed Milling of Aerospace Aluminum Alloy

Experimental Studies of Cutting Temperature During High-Speed Milling of Aerospace Aluminum

Simulation Research on Temperature Filed and Thermal Stress Field of 7050 Aluminum Alloy Part in Quenching Process

Numerical Simulation of 3D Transient Temperature Field in Aluminum Alloy Solidification Process

Numerical Simulation of Residual Stress in Quenching 2024 Honeycomb Aluminum Alloy Thin Plates

Experiment and finite element simulation of online quenching process for 6063 aluminum alloy

Relief of Residual Stresses in 7050 Aluminum Alloy by Deep Cryogenic Treatment

Numerical Simulation and Experimental Investigation of the Aluminum Alloy Quenching-induced Residual Stress by Considering the Flow Stress Characteristic

Temperature Field Simulation of Air Cooling Condition 40cr ANSYS

6063 Aluminum Alloy Online Quenching Surface Heat Transfer Coefficient and the Temperature Field Simulation

Numerical modeling of the heat treatment with residual heat of aluminum castings

Numerical Simulation of Quenching and Pre-Stretching Residual Stress in 7085 Aluminum Alloy Plate

Numerical Simulation of Thermal Field of Friction Stir Welding for Aluminum Alloy

Experiment Research and Simulation Analysis on Online Quenching Process for 6061 Aluminum Alloy

Accurate Simulation of Complex Temperature Field in Counter-Pressure Casting Process Using A356 Aluminum Alloy

Temperature Field Simulation of Electron Beam Cold Hearth Melting TC4 Alloy

Numerical Simulation of the Quenching of the 7075 Aluminum Alloy Die-Forged Shell

Numerical Simulation of Temperature Field and Grain Structure in Cu-10Al Alloy Produced by Heated Mould Continuous Casting

Numerical Simulation About Influence of Water Temperature on Quenching Stress Fields of 7075 Alloy Drop-forged in Quenching