Abstract:Thecost-effective and environment-friendly template of LaMnO 3 /epi-MgO/ion beam-assisted deposited (IBAD-)MgO/solution deposition planarized (SDP) Y 2 O 3 /Hastelloy tape was used as the substrate, on which the technique of metal organic chemical vapor deposition (MOCVD) has been applied to depositing 1.2- μ m-thick YBa 2 Cu 3 O 7− x (YBCO) films by modulating the substrate temperature ranging from 750 to 850 ∘ C. The effects of substrate temperature on the preferential orientation, textures, surface morphology, and performance of the YBCO films were systematically investigated. X-ray diffraction and scanning electron microscope revealed that as substrate temperature increased from 750 to 810 ∘ C, the orientation of YBCO films was transferred from the a -axis to the c -axis; meanwhile, the textures were improved and the films became denser. However, as the substrate temperature rose above 810 ∘ C, the composition distributions and textures of YBCO films degraded quickly, and the films were barium-poor with CuYO 2 impurity arising, of which all negatively affected the critical current density ( J c ) of YBCO films. Around 810 ∘ C, the YBCO film was of the best crystallization and microstructure as well as highly epitaxial growth, leading to the highest J c of 1.8 MA/cm 2 at 77 K and self-field.

Polymer Assisted Thick Single-Layer YBa 2 Cu 3 O 7-Δ Films Prepared with Modified TFA-MOD Method

Mod-derived YBa2Cu3O7-δ thin filmsusing a fast pyrolysis process

MOD multi-layer YBCO films on single-crystal substrate

MOD-Derived YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> Thin Films using a Fast Pyrolysis Process

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Preparation of YBa2Cu3O7−δ Films by MOD Method Using Trifluoroacetate As Precursor

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Epitaxial Growth of Mocvd-Derived Ybco Films by Modulation of Cu(Tmhd)(2) Concentration

Preparation and Characterization of Microcrack-Free Thick YBa 2 Cu 3 O 7-Δ Films

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Study on PEG Assisted TFA-MOD Method for Rapid Fabrication of YBa2Cu3O7−δ Thin Films: Influence of PEG Additive Amount in Precursor Solutions

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Temperature-Modulated Growth of MOCVD-Derived YBa2Cu3O7−x Films on IBAD-MgO Templates

Double-sided Reel-to-reel Metal-Organic Chemical Vapor Deposition System of YBa2Cu3O7-δ Thin Films

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

A Rapid Process of YBa2Cu3O7−δthin Film Fabrication Using Trifluoroacetate Metal–organic Deposition with Polyethylene Glycol Additive

MOCVD-derived Multilayer Gd0.5Y0.5Ba2Cu3O7−δfilms Based on a Novel Heating Method

Thick DyBCO/YBCO Multilayer Films on LaMnO 3 Substrate Derived by Metal Organic Deposition Method

Study on the growth of YBCO films deposited by rapid pyrolysis process TFA-MOD

Crystallization Characteristics of YBa2Cu3O7−δ Film During TFA-MOD

Development of High Critical Current YBCO Coated Conductors by Photo-Assisted MOCVD