Abstract:Abstract Avalanche photodiodes (APDs) have drawn huge interest in recent years and have been extensively used in a range of fields including the most important one—optical communication systems due to their time responses and high sensitivities. This article shows the evolution and the recent development of A III B V , A II B VI , and potential alternatives to formerly mentioned—“ third wave ” superlattices (SL) and two-dimensional (2D) materials infrared (IR) APDs. In the beginning, the APDs fundamental operating principle is demonstrated together with progress in architecture. It is shown that the APDs evolution has moved the device’s performance towards higher bandwidths, lower noise, and higher gain-bandwidth products. The material properties to reach both high gain and low excess noise for devices operating in different wavelength ranges were also considered showing the future progress and the research direction. More attention was paid to advances in A III B V APDs, such as AlInAsSb, which may be used in future optical communications, type-II superlattice (T2SLs, “Ga-based” and “Ga-free”), and 2D materials-based IR APDs. The latter—atomically thin 2D materials exhibit huge potential in APDs and could be considered as an alternative material to the well-known, sophisticated, and developed A III B V APD technologies to include single-photon detection mode. That is related to the fact that conventional bulk materials APDs’ performance is restricted by reasonably high dark currents. One approach to resolve that problem seems to be implementing low-dimensional materials and structures as the APDs’ active regions. The Schottky barrier and atomic level thicknesses lead to the 2D APD dark current significant suppression. What is more, APDs can operate within visible (VIS), near-infrared (NIR)/mid-wavelength infrared range (MWIR), with a responsivity ~80 A/W, external quantum efficiency ~24.8%, gain ~10 5 for MWIR [wavelength, λ = 4 μm, temperature, T = 10–180 K, Black Phosphorous (BP)/InSe APD]. It is believed that the 2D APD could prove themselves to be an alternative providing a viable method for device fabrication with simultaneous high-performance—sensitivity and low excess noise.

Fabrication of A 10 Gb/S Ingaas/Inp Avalanche Photodiode with an Algainas/Inp Distributed Bragg Reflector

Avalanche photodiode with ultrahigh gain–bandwidth product of 1,033 GHz

High-speed waveguide Ge/Si avalanche photodiode with a gain-bandwidth product of 615 GHz

InGaAs/InAlAs avalanche photodiodes with a high responsivity and multiplication factor using carbon-doped p-InAlAs as the charge layer

High-performance waveguide Ge/Si avalanche photodiode with a lateral separate-absorption-charge-multiplication structure

High-Performance Lateral Avalanche Photodiode Based on Silicon-on-Insulator Structure

High-speed InAlAs digital alloy avalanche photodiode

High performance InGaAs/InP single-photon avalanche diode using DBR-metal reflector and backside micro-lens

Characteristics of Thin InAlAs Digital Alloy Avalanche Photodiodes.

High performance InGaAs/InP avalanche photodiode integrated with metal-insulator-metal microcavity

10 Gbps silicon waveguide-integrated infrared avalanche photodiode

High-performance Waveguide Ge/Si Avalanche Photodiode with Simplified Fabrication Processes

A Gan P-I-P-I-N Ultraviolet Avalanche Photodiode

Infrared avalanche photodiodes from bulk to 2D materials

Multilayer Graphene/Epitaxial Silicon Near-Infrared Self-Quenched Avalanche Photodetectors

A review on III–V compound semiconductor short wave infrared avalanche photodiodes

A Pmt-Like High Gain Avalanche Photodiode Based on Gan/Aln Periodically Stacked Structure

High-Performance Waveguide-Integrated Ge/Si Avalanche Photodetector with Lateral Multiplication Region

Separate absorption, charge, and multiplication staircase avalanche photodiodes

Double modulation of the electric field in InGaAs/Si APD by groove rings for the achievement of THz gain-bandwidth product

Low-Energy Ion Implantation and Deep-Mesa Si-Avalanche Photodiodes with Improved Fabrication Process