Abstract:Highly flexible, nonvolatile resistive switching-based memory devices with a hierarchical thin-film architecture were fabricated using a low-temperature, cost-efficient solution processing technique. The device structure consists of an ITO-coated flexible PET substrate as the bottom electrode and a PMMA-embedded reduced-graphene/ZnO nanoparticle (NP) (rGO/ZnO NP) heterostructure as the flexible active layer. Besides, a PMMA-embedded graphene oxide (GO/PMMA)-based device was also fabricated as a reference. The operating voltage of this device is limited within ±2 V, whereas the ON/OFF current ratio is ∼106, which is ∼103 times higher than the reference device. The device also exhibited excellent endurance and retention characteristics, with no significant degradation for more than 50 cycles. Besides, the retention time of this device is ∼104 s, which is several times more than that of the reference device. These electrical performance enhancements were attributed to the multifunctionality introduced by the rGO/ZnO NP heterostructures, which combine the excellent conductivity of rGO nanosheets with charge trapping and transport properties and high electron mobility of ZnO nanostructures. A model based on the energy band of the components of this composite material has been proposed for a better understanding of this mechanism. Flexibility studies exhibited stable device performance for an extreme bending radius of 6 mm. The resistance of the device in ON and OFF states did not show any significant change even after 1000 bending cycles, thus establishing the device as an excellent memory candidate for flexible electronic applications such as flexible displays and sensors, wearable devices, implantable medical devices, and portable diagnostic devices.

High Performance Resistive Switching Memory Organic Films Prepared Through PPy Growing on Graphene Oxide Substrate

Nonvolatile resistance switching memory devices fabricated from the photopolymerized poly( N -vinylcarbazole)-graphene oxide composites

Preparation of Graphene Oxide/Poly(1-vinylimidazole) Composites for Resistive Switching Memory.

Preparation of Graphene Oxide-Polypyrrole-polyvinylferrocene Ternary Nanocomposite and Its Resistive-Switching Characteristic

The preparation of water-dispersible graphene oxide/conjugated polymer nanocomposite and the nonvolatile resistive switching memory properties

Bipolar Resistive Switching in Al/GO-PEDOT:PSS/Pt Memory Devices

Nonvolatile rewritable memory device based on solution-processable graphene/poly(3-hexylthiophene) nanocomposite

Resistive Switching in Organic Memory Device Based on Parylene-C With Highly Compatible Process for High-Density and Low-Cost Memory Applications

Novel Covalent-Organometallic Polymer for Highly Stable Nano-Resistive Switching Memories

Graphene Oxide and Tio2 Nano-Particle Composite Based Nonvolatile Memory

Retention Behavior of Graphene Oxide Resistive Switching Memory on Flexible Substrate

One-step Preparation of Graphene Oxide–poly(3,4 Ethylenedioxythiophene) Composite Films for Nonvolatile Rewritable Memory Devices

Preparation of MoS₂-polyvinylpyrrolidone nanocomposites for flexible nonvolatile rewritable memory devices with reduced graphene oxide electrodes.

A flexible nonvolatile resistive switching memory device based on ZnO film fabricated on a foldable PET substrate

Forming-Free Resistive Switching Memory Based on Lifepo4 Nano-Particle Embedded in Conjugated Polymer

Flexible Transparent High‐Efficiency Photoelectric Perovskite Resistive Switching Memory

Reproducible And Controllable Organic Resistive Memory Based On Al/Poly(3,4-Ethylene-Dioxythiophene):Poly(Styrenesulfonate)/Al Structure

Highly Flexible Non-Volatile Resistive Memory Devices Based on ZnO Nanoparticle/Graphene Heterostructures Embedded in Poly(methyl methacrylate)

Bulk Heterojunction Polymer Memory Devices With Reduced Graphene Oxide As Electrodes

Rewritable and non-volatile memory effects based on polyimides containing pendant carbazole and triphenylamine groups

Non-Polar and Complementary Resistive Switching Characteristics in Graphene Oxide devices with Gold Nanoparticles: Diverse Approach for Device Fabrication