Abstract:The resistive switching memory effects in metal-insulator-metal devices with aluminium (Al) as top electrode (TE) and bottom electrode (BE). A solution processed active layer consisting of zinc oxide (ZnO) nanoparticles embedded in an insulating polyvinyl alcohol (PVA) matrix and polymer poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) has been studied by using flexible polyethylene terephthalate (PET) substrates. The current-voltage (I-V) measurements of hybrid Al/ZnO-PVA/PEDOT:PSS/Al/flexible PET substrate device exhibited a non-volatile bistable resistive switching behaviour, which is attributed to the trapping, storage and transport of charges in the electronic states of the ZnO nanoparticles. The performance of hybrid device is significantly enhanced over control Al/PEDOT:PSS/Al and Al/ZnO-PVA/Al devices due the presence of PEDOT:PSS polymer. This PEDOT:PSS improves the performance of oxygen ions (holes) migration toward BE and protect back oxygen vacancies (electrons) migrate toward BE from ZnO-PVA composites which may reduces the leakage current, as a result, increased the 'ON state/OFF state' current ratio of 7.9 × 103 times. The fabricated hybrid device showed high ON/OFF switching current ratio larger than five orders of magnitude with low operating voltages. It is observed that, the existence of two conducting states, namely, low conductivity state (OFF state) and high conductivity state (ON state), exhibiting bistable behaviour. The state of the device was maintained even after removal of the applied bias, indicating the non-volatile memory. The observed current-time response showed good memory retention behaviour of the fabricated devices. The excellent stability and retention performances of hybrid device verify the reliability of this device and demonstrate their potential for application in non-volatile bistable memory device. The carrier transport mechanism of the bistable behaviour for the fabricated non-volatile organic bistable devices structures is described on the basis of the I-V experimental results by analyzing the effect of space charge and electronic structure. Interestingly, the device performance was not degraded and remains identical even after bending the device from 60-120° angles, which indicates high potential for flexible non-volatile bistable memory device applications. This demonstration provides a class of memory devices with the potential for future flexible electronics applications.

Resistive Switching in Organic Memory Device Based on Parylene-C With Highly Compatible Process for High-Density and Low-Cost Memory Applications

Resistive Switching in Organic Memory Devices for Flexible Applications

Novel polymer resistive memory based on parylene with high compatibility and scalability

Flexible Single-Component-Polymer Resistive Memory for Ultrafast and Highly Compatible Nonvolatile Memory Applications

Flexible Polymer Device Based on Parylene-C with Memory and Temperature Sensing Functionalities

From dead leaves to sustainable organic resistive switching memory

A Flexible Organic Resistance Memory Device for Wearable Biomedical Applications

Forming-Free Resistive Switching Memory Based on Lifepo4 Nano-Particle Embedded in Conjugated Polymer

Memory Devices via Unipolar Resistive Switching in Symmetric Organic-Inorganic Perovskite Nanoscale Heterolayers

Inorganic-Organic Hybrid Resistive Switching Memory with High Uniformity and Multilevel Operation

Novel Covalent-Organometallic Polymer for Highly Stable Nano-Resistive Switching Memories

High Performance Resistive Switching Memory Organic Films Prepared Through PPy Growing on Graphene Oxide Substrate

Stable Resistive Switching in ZnO/PVA:MoS2 Bilayer Memristor

Stable Resistive Switching in ZnO/PVA:MoS<sub>2</sub> Bilayer Memristor

Bipolar Resistive Switching in Al/GO-PEDOT:PSS/Pt Memory Devices

Perylene-Based columnar liquid Crystal: Reveling resistive switching for nonvolatile memory devices

Bifunctional resistive switching behavior in an organolead halide perovskite based Ag/CH3NH3PbI3−xClx/FTO structure

Electrical Switching Behavior from All-Polymer-Based System of Semiconductor/Ferroelectrics/Semiconductor

Interface Engineering With Mos2-Pd Nanoparticles Hybrid Structure For A Low Voltage Resistive Switching Memory

Flexible resistive switching bistable memory devices using ZnO nanoparticles embedded in polyvinyl alcohol (PVA) matrix and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)

Bipolar Resistive Switching in Cu/Aln/Pt Nonvolatile Memory Device