Self-Aligned Top-Gate Metal-Oxide Thin-Film Transistors Using a Solution-Processed Polymer Gate Dielectric
Seungbeom Choi,Seungho Song,Taegyu Kim,Jae Cheol Shin,Jeong-Wan Jo,Sung Kyu Park,Yong-Hoon Kim
DOI: https://doi.org/10.3390/mi11121035
IF: 3.4
2020-11-25
Micromachines
Abstract:For high-speed and large-area active-matrix displays, metal-oxide thin-film transistors (TFTs) with high field-effect mobility, stability, and good uniformity are essential. Moreover, reducing the RC delay is also important to achieve high-speed operation, which is induced by the parasitic capacitance formed between the source/drain (S/D) and the gate electrodes. From this perspective, self-aligned top-gate oxide TFTs can provide advantages such as a low parasitic capacitance for high-speed displays due to minimized overlap between the S/D and the gate electrodes. Here, we demonstrate self-aligned top-gate oxide TFTs using a solution-processed indium-gallium-zinc-oxide (IGZO) channel and crosslinked poly(4-vinylphenol) (PVP) gate dielectric layers. By applying a selective Ar plasma treatment on the IGZO channel, low-resistance IGZO regions could be formed, having a sheet resistance value of ~20.6 kΩ/sq., which can act as the homojunction S/D contacts in the top-gate IGZO TFTs. The fabricated self-aligned top-gate IGZO TFTs exhibited a field-effect mobility of 3.93 cm2/Vs and on/off ratio of ~106, which are comparable to those fabricated using a bottom-gate structure. Furthermore, we also demonstrated self-aligned top-gate TFTs using electrospun indium-gallium-oxide (IGO) nanowires (NWs) as a channel layer. The IGO NW TFTs exhibited a field-effect mobility of 0.03 cm2/Vs and an on/off ratio of >105. The results demonstrate that the Ar plasma treatment for S/D contact formation and the solution-processed PVP gate dielectric can be implemented in realizing self-aligned top-gate oxide TFTs.
chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied