Abstract:The continuous increase in anthropogenic CO2 emissions is widely acknowledged as one of the main reasons for global climate change. To address this issue, significant advancements have been made in developing CO2 capture and utilization technologies that offer new solutions for mitigating carbon emissions and promoting a carbon economy. In this review, we summarize the recent research progress in CO2 capture and separation technologies, including pre-combustion, post-combustion, oxy-fuel combustion, chemical looping combustion and calcium looping combustion. Among these technologies, post-combustion is seen as one of the most promising options for reducing CO2 emissions from existing power plants, as it can be easily integrated into existing facilities without requiring major modifications. Therefore, the second section of this article focuses on the various post-combustion processes and technologies, such as physical absorption, amine scrubbing, dual-alkali absorption, chilled ammonia, membrane separation, and solid adsorption, with a particular emphasis on most recent research reports. As amine-based chemical absorption is the most leading post-combustion CO2 capture technique, the third section summarizes the recent development in amine-based absorption technology by covering conventional and emerging types of absorbents such as single amine, blended amine, biphasic amine, and non-aqueous amine processes. The different liquid absorption-based process is compared in terms of regeneration energy consumption, CO2 intake capacity, and optimal operating conditions, and the comparison data is summarized in tables. A critical literature review and comparison of various techniques show that non-aqueous amine absorbents can be promising alternatives to the conventional monoethanolamine (MEA) process. The goal of this review is to provide strategies and perspectives for accelerating the further study and development of CCS technologies.

Aqueous Ammonia Based Post Combustion Capture: Results from Pilot Plant Operation, Challenges and Further Opportunities

Results from trialling aqueous ammonia-based post-combustion capture in a pilot plant at Munmorah Power Station: Gas purity and solid precipitation in the stripper

Reducing Aerosol and Ammonia Emission in Post-Combustion CO2 Capture: Additives As Key Solutions

Practical Experience in Post-combustion CO2 Capture Using Reactive Solvents in Large Pilot and Demonstration Plants

Development and testing of a new post-combustion CO2 capture solvent in pilot and demonstration plant

Post-Combustion CO2 Capture Demonstration Using Supported Amine Sorbents: Design and Evaluation of 200 Kwth Pilot

Recent technological developments in post combustion CO2 capture amine scrubbing process in commercial plants

Recent progress in carbon dioxide capture technologies: A review

Aerosol Emissions and Mitigation of Aqueous AMP/PZ Solvent for Postcombustion CO2 Capture

Ammonia-based post-combustion CO2 and SO2 integrating capture using multi-stage solvent circulation process

Systematic study of aqueous monoethanolamine‐based CO2 capture process: model development and process improvement

An Advanced, Ammonia-Based Combined NOx/SOx/CO2 Emission Control Process Towards a Low-Cost, Clean Coal Technology

Experimental Study and Numerical Simulation on CO2 Capture from Flue Gas Using Amine-Based Absorbent in Coal-Fired Power Plant

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Simulation of CO2 capture using ammonia scrubbing: A comparison with MEA scrubbing

Reducing aerosol and ammonia emission in post-combustion CO 2 capture: Additives as key solutions

Industrial test of post combustion CO2 capture by reactive absorption with two new solvents in natural gas power plant

Optimization of Carbon Capture Process Using Aqueous Ammonia with Rate-Based Simulation Method

Simulation Optimization of A New Ammonia-Based Carbon Capture Process Coupled with Low-Temperature Waste Heat Utilization

Research Progress of Aqueous Amine Solution for CO2 Capture: A Review

Research Progress on Amine Absorbent for CO2 Capture from Flue Gas