ChemInform Abstract: Direct Growth of Flexible LiMn2O4/CNT Lithium‐Ion Cathodes.

Xilai Jia,Chunzhu Yan,Zheng Chen,Ranran Wang,Qiang Zhang,Lin Guo,Fei Wei,Yunfeng Lu

DOI: https://doi.org/10.1002/chin.201147005

2011-01-01

ChemInform

Abstract:AbstractSpontaneous redox reactions between mildly pre‐oxidized carbon nanotubes and KMnO4 (90 °C, 4 h) generate layers of MnO2 wrapped around the carbon nanotubes.

What problem does this paper attempt to address?

Direct growth of flexible LiMn2O4/CNT lithium-ion cathodes.

Xilai Jia,Chunzhu Yan,Zheng Chen,Ranran Wang,Qiang Zhang,Lin Guo,Fei Wei,Yunfeng Lu

DOI: https://doi.org/10.1039/c1cc13536h

IF: 4.9

2011-01-01

Chemical Communications

Abstract:Flexible, binder-free LiMn2O4/CNT nanocomposites with good reversible capability and cycling stability were fabricated by in-situ hydrothermal growth for flexible lithium battery applications.
ChemInform Abstract: α-MnO2Nanotubes: High Surface Area and Enhanced Lithium Battery Properties.

Lihong Li,Caiyun Nan,Jun Lu,Qing Peng,Yadong Li

DOI: https://doi.org/10.1002/chin.201241011

2012-01-01

ChemInform

Abstract:The title nanotubes are hydrothermally prepared from a mixture of KMnO4, NH4H2PO4, Bu4NOH, and H2O (autoclave, 180 °C, 48 h).
Direct Growth of Flexible Carbon Nanotube Electrodes

J. Chen,A. I. Minett,Y. Liu,C. Lynam,P. Sherrell,C. Wang,G. G. Wallace,A. I. Minett,G. G. Wallace

DOI: https://doi.org/10.1002/adma.200701146

IF: 29.4

2008-02-04

Advanced Materials

Abstract:Multiwalled CNT entangled networks integrated into a highly conducting carbon layer can be grown on a range of substrates including glassy carbon and metal foils. A continuous flexible CNT electrode with high surface area and conductivity is produced, with a stable battery capacity of 572 mAh g–1. This discovery provides a direct route for the generation of large‐scale flexible CNT electrode materials.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A Dual-Carbon-anchoring Strategy to Fabricate Flexible LiMn2O4 Cathode for Advanced Lithium-Ion Batteries with High Areal Capacity

Xiaoliang Yu,Jiaojiao Deng,Xin Yang,Jia Li,Zheng-Hong Huang,Baohua Li,Feiyu Kang

DOI: https://doi.org/10.1016/j.nanoen.2019.104256

IF: 17.6

2020-01-01

Nano Energy

Abstract:Lithium transition metal oxides (LTMOs) are important cathode materials in lithium-ion batteries (LIBs). Constructing the robust hybrid of LTMO-flexible substrate is of great significance for developing advanced flexible LIBs. However, currently reported flat noble metal-based flexible cathodes are cost-expensive and show quite low areal capacities. Developing low-cost and nanostructured flexible substrates for LTMO cathodes is highly desirable but still rarely reported. Particularly challenging is preventing flexible substrate corrosion and mitigating/eliminating the severe ion migration at interface during necessary high-temperature annealing process. Herein, carbon nanofibers (CNFs) with truncated conical graphene layers are carefully chosen as flexible substrates for the growth of ultrasmall LiMn2O4 nanocrystals. The highly graphitic structure enables good high-temperature oxidation resistance. The plenty of exposed graphitic edge planes afford unexpected strong anchoring of LiMn2O4, evidenced by both experimental results and theoretical calculations. Moreover, an amorphous carbon layer is simultaneously introduced and coated on LiMn2O4 nanocrystals, which provides another strong outer anchoring like a 'cargo net'. Such dual-carbon-anchoring strategy help produce a 1D LiMn2O4-nanocarbon hybrid with robust interface. As LIB cathode, it owns fast electron conduction, smooth Li+ transportation, good electrochemical stability and especially superior mechanical flexibility, thus enabling a high areal mass loading of 17.7 mg cm(-2). The corresponding fabricated flexible LiMn2O4/CNF@C//CNF full cell exhibits a high areal capacity of 2.01 mAh cm(-2) as well as good rate capability and cycling stability.
A one-step dynamic hydrothermal method for the synthesis of orthorhombic LiMnO2/CNTs nanocomposites networks for Li-ion batteries

Chaoqi Shen,Hui Xu,Liu Liu,Heshan Hu,Kondo-Francois Aguey-Zinsou,Lianbang Wang

DOI: https://doi.org/10.1016/j.jallcom.2020.157834

IF: 6.2

2021-04-01

Journal of Alloys and Compounds

Abstract:Orthorhombic LiMnO2 (o-LiMnO2) is considered as a potential cathode material for lithium ion batteries due to its high theoretical capacity and low cost. However, the irreversible phase transformation to spinel LiMn2O4 and sluggish lithium ion diffusion kinetics result in low practical specific capacity and poor cycling stability. In this work, conductive o-LiMnO2/carbon nanotubes (CNTs) composites frameworks were constructed via an ingenious one-step dynamic hydrothermal method. The obtained o-LiMnO2/CNTs composites achieved outstanding electrochemical performance upon adjustment of the CNTs content. The results demonstrated either physical introduction of 1 wt% CNTs into o-LiMnO2 or in-situ formed o-LiMnO2/CNTs composite with 0.5 wt% CNTs could improve electrochemical performance effectively compared with pristine o-LiMnO2. However, when the content of CNTs increased to 1 wt% in in-situ formed o-LiMnO2/CNTs, the specific capacity reached 194.4 mAh g−1 and retention rate was 93.7% after 50 cycles at 0.1C. Moreover, the in-situ formed composite with 5 wt% CNTs led to the optimum specific capacity of 204.9 mAh g−1 and a high capacity retention rate (97.7% after 50 cycles at 0.1C). Galvanostatic intermittent titration technique (GITT) measurement also demonstrated that 5 wt% CNTs in o-LiMnO2/CNTs composite drastically improved the slowest Li+ diffusion step by a factor 100 times after 30 cycles as compared to the pristine counterpart. This behaviour demonstrated an accelerated diffusion of lithium through this new approach and improved reversibility of charging-discharging.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Direct growth of MnO2 on carbon fiber cloth for electrochemical capacitor

Hongzhong Chi,Shun Tian,Xuansheng Hu,Haiying Qin,Junhua Xi

DOI: https://doi.org/10.1016/j.jallcom.2013.10.243

IF: 6.2

2014-01-01

Journal of Alloys and Compounds

Abstract:•Highly flexible and light-weight MnO2/carbon fiber cloth electrode.•Through a direct reduction of permanganate.•Excellent mechanical flexibility and high-rate capability.
High Rate LiMn2O4/carbon Nanotube Composite Prepared by a Two-Step Hydrothermal Process

Bang-Kun Zou,Xiao-Hang Ma,Zhong-Feng Tang,Chu-Xiong Ding,Zhao-Yin Wen,Chun-Hua Chen

DOI: https://doi.org/10.1016/j.jpowsour.2014.06.085

IF: 9.2

2014-01-01

Journal of Power Sources

Abstract:A two-step hydrothermal approach is employed to synthesize LiMn2O4/carbon nanotube (LMO/CNT) composite powders. X-ray diffraction, scanning electron microscopy, thermal gravimetry and N2-adsorption/desorption are used to characterize their structures and compositions. Galvanostatic cycling in coin-cells is adopted to measure their electrochemical properties as cathode materials of lithium-ion batteries. A LiMn2O4 pure phase of high crystallinity is observed with CNT homogeneously dispersed in the composite network. The electrochemical properties of them are associated with two factors, i.e. the content of CNT in the hydrothermal process and the annealing temperature at the subsequent heat treatment step. Excellent rate capability of these LMO/CNT electrodes can be achieved.
Enhancing the electrochemical performance of Li-rich cathode material by a flexible precursor treatment method

Meng Wang,Yongqiang Han,Mengxia Zhang,Mo Chu,Meng Liu,Yijie Gu

DOI: https://doi.org/10.1016/j.ssi.2020.115498

IF: 3.699

2020-12-01

Solid State Ionics

Abstract:The Li1.2Mn0.54Ni0.13Co0.13O2 cathode material with excellent electrochemical properties was successfully prepared by treating precursor with KMnO4. The results indicated that KMnO4 treatment could depress Li+/Ni2+ cation mixing degree and extend c axis of the cathode material structure. Simultaneously, the formed spinel phase could improve cycling stability and provide 3D Li+ diffusion channels. The modified materials showed the increased discharge capacity, improved capacity retention and the suppressed electrochemical impedance. And the interface stability between the cathode material and electrolyte was greatly improved. The improvement can be assigned to the more ordered crystal structure and the moderate spinel structure.

chemistry, physical,physics, condensed matter
ChemInform Abstract: Self‐Supported Formation of Needlelike Co3O4 Nanotubes and Their Application As Lithium‐Ion Battery Electrodes.

Xiong Wen Lou,Da Deng,Jim Yang Lee,Ji Feng,Lynden A. Archer

DOI: https://doi.org/10.1002/chin.200813010

2008-01-01

ChemInform

Abstract:ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.
ChemInform Abstract: Α‐mno2 Nanotubes: High Surface Area and Enhanced Lithium Battery Properties.

Lihong Li,Caiyun Nan,Jun Lu,Qing Peng,Yadong Li

DOI: https://doi.org/10.1002/chin.201241011

2012-01-01

ChemInform

Abstract:AbstractThe title nanotubes are hydrothermally prepared from a mixture of KMnO4, NH4H2PO4, Bu4NOH, and H2O (autoclave, 180 °C, 48 h).
Facile Synthesis of Birnessite δ-MnO 2 and Carbon Nanotube Composites as Effective Catalysts for Li-CO 2 Batteries

Qiannan Liu,Zhe Hu,Lin Li,Weijie Li,Chao Zou,Huile Jin,Shun Wang,Shu-Lei Chou

DOI: https://doi.org/10.1021/acsami.1c03229

2021-04-05

Abstract:Li-CO2 batteries are one type of promising energy storage and conversion devices to capture and utilize the greenhouse gas CO2, mitigating global temperature rise and climate change. Catalysts that could effectively decompose the discharge product, Li2CO3, are essential for high-performance Li-CO2 batteries. Benefiting from the interconnected porous structure, favorable oxygen vacancy, and the synergistic effects between the carbon nanotube (CNT) and layered birnessite δ-MnO2, our Li-CO2 cathodes with the as-prepared δ-MnO2 catalyst can efficiently afford a large reaction surface area and abundant active sites, provide sufficient electron/Li+ transport pathways, and facilitate electrolyte infiltration and CO2 diffusion, demonstrating low overpotential and superior cycling stability, which have been proven by both experimental characterization and theoretical computation. It is expected that this work can provide guidance for the design and synthesis of high-performance electrochemical catalysts for Li-CO2 batteries.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03229?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03229</a>.Element contents and K/Mn ratios estimated from EDS mapping; SEM and TEM images of the CNT; SEM images and TEM images of 2; TGA curve of the CNT; XRD pattern and SEM image of 2 after calcination; elemental compositions of 2 samples; pore size distribution of 2 samples; surface areas, pore volumes, and average pore diameters of 2 samples; XPS spectra; CV profile of the CNT; summary of the electrochemical performances of various Li-CO2 batteries using similar catalysts; SEM image of pristine 2; charge–discharge profiles of 2; SEM image of the charged 2 electrode; and SEM image and discharge profiles of 2 after having been discharged to 2.0 V (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03229/suppl_file/am1c03229_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Preparation and Electrochemical Performance of Li_2MnSiO_4/CNTs Composite Cathode Material for Lithium Ion Batteries

Bao Li

2013-01-01

Abstract:Li2MnSiO4/CNTs composite cathode material for lithium ion batteries was in situ synthesized by the sol-gel process assisted with hydrothermal method.The crystalline structure and morphology of the obtained samples containing 0,5,10,20 and 30 g carbon nanotubes(CNTs) in 1 mol Li2MnSiO4,respectively,were characterized by X-ray diffraction(XRD),scanning electron microscopy(SEM) and their electrochemical performances were evaluated by different electrochemical test.The results show that the grains of samples have narrow size distribution and their dimension is about 100 nm.They are easy to be an agglomerate mass and the agglomeration of the samples is gradually reduced with the increase of the contents of CNTs.The XRD patterns reveal that the well-crystallized Li2MnSiO4/CNTs materials are orthorhombic with space group Pmn21.The sample with 20 g CNTs in 1 mol Li2MnSiO4(the carbon content is 16.74%) demonstrates the best electrochemical performance,showing an initial discharge capacity of 150 mA·h/g and a discharge capacity of 80 mA·h/g after 20 cycles at 10 mA/g current density.The in situ composite of CNTs could improve the overall conductivity and the electrochemical performance of Li2MnSiO4 cathode materials.
Single-Crystalline Limn2o4 Nanotubes Synthesized Via Template-Engaged Reaction As Cathodes for High-Power Lithium Ion Batteries

Yuan-Li Ding,Jian Xie,Gao-Shao Cao,Tie-Jun Zhu,Hong-Ming Yu,Xin-Bing Zhao

DOI: https://doi.org/10.1002/adfm.201001448

IF: 19

2011-01-01

Advanced Functional Materials

Abstract:Single-crystalline nanotubes of spinel LiMn2O4 with a diameter of about 600 nm, a wall thickness of about 200 nm and a length of 1-4 mu m have been synthesized via a template-engaged reaction using beta-MnO2 nanotubes as a self-sacrifice template. In this fabrication, a minimal structural reorganization can be responsible for the chemical transformation from [001]-oriented beta-MnO2 template to [110]-oriented LiMn2O4. Galvanostatic charge/discharge measurements indicate that the nanotubes exhibit superior high-rate capabilities and good cycling stability. About 70% of its initial capacity can be retained after 1500 cycles at 5 C rate. Importantly, the tubular nanostructures and the single-crystalline nature of the most LiMn2O4 nanotubes are also well preserved after prolonged charge/discharge cycling at a relatively high current density, indicating good structural stability of the single-crystalline nanotubes during lithium intercalation/deintercalation process. As is confirmed from Raman spectra analyses, no evident microstructural changes occur upon long-term cycling. These results reveal that single-crystalline nanotubes of LiMn2O4 will be one of the most promising cathode materials for high-power lithium ion batteries.
Inward growth of superthin TiC skin on carbon nanotube framework as stable cathode support for Li–O2 batteries

Chu-Shu Yang,Zhuang Sun,Zhonghui Cui,Fang-Ling Jianga,Jun-Wen Denga,Tao Zhang

DOI: https://doi.org/10.1016/j.ensm.2020.04.018

IF: 20.4

2020-09-01

Energy Storage Materials

Abstract:The rational design and synthetic route to fabricate stable air cathode supports, which combine high electron conductivity and desirable superoxide anion radical species (O2−)-against stability, remain critical but still challenging for sustainable Li–O2 batteries. Herein, a method of inward vapor-solid growth is proposed to prepare superthin TiC skin on multi-walled carbon nanotubes framework (MWNTs) as stable support (TiC/MWNTs) for air cathodes. By adjusting reaction temperature and time, the sp2-hybrid carbon walls of MWNTs are transformed into dense TiC skins layer by layer from outside to inside. The thickness of the transformed TiC skin can be controlled at a superthin nanosized magnitude of 3 nm. Benefiting from the seamless TiC surface layer, the TiC/MWNTs possesses both the advantages of MWNTs framework (light mass and high electronic conductivity) and TiC skin (excellent O2--against stability). Besides, by loading the catalyst of Ru nanoparticles on the obtained TiC/MWNTs support, the Li–O2 battery exhibits long-term cyclability (90 cycles) with little by-products (Li2CO3). The inward growth method is demonstrated to be also effective for graphene sheets and the conventional carbon blacks of Ketjenblack (KB). This achievement provides a new approach for surface enhancement of carbon electrodes from universal electrolyte corrosion problems.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Ultralong MnO@C nanowires with internal voids anchored between graphene as a robust high performance anode for flexible Li-Ion battery

Geng Zhong,Jiali Yu,Peiyuan Zhuang,Mengyuan Jin,Yanbao Fu,Xiaohua Ma

DOI: https://doi.org/10.1016/j.electacta.2018.09.199

IF: 6.6

2019-01-01

Electrochimica Acta

Abstract:Transition-metal oxides (TMOs) are considered as promising anode materials for lithium ion batteries. However, the poor structural stability and relatively low electronic conductivity greatly limit their application in flexible electronic devices. Herein, a 3D hierarchical high performance MnO-based flexible electrode is fabricated through vacuum-assisted layer-by-layer assembly of 1D polydopamine coated MnO2 nanowires (MnO2@PDA NWs) and 2D graphene oxide nanosheets (GO NSs), followed by a thermal reduction process. The resulting composite (MnO@C-rGO) demonstrates excellent flexibility, structure stability and manifests outstanding lithium storage performance in terms of high reversible capacity (920 mAh g−1 at 0.2 A g−1), excellent rate capability (686 mAh g−1 at 2 A g−1 and 396 mAh g−1 at 10 A g−1) and impressive cycling stability (719 mAh g−1 at 2 A g−1 without fading after 800 cycles), exceeding most of recently reported MnO-based anodes. It is proved that the freestanding flexible MnO@C-rGO anode can be successfully applied in flexible full cell, which achieves superior flexibility and maintains good electrochemical performance during mechanical deformations.
In-situ Growth of MnO2 Crystals under Nanopore-Constraint in Carbon Nanofibers and Their Electrochemical Performance

Trung Hieu Le,Ying Yang,Yu Liu,Zheng‐Hong Huang,Feiyu Kang

DOI: https://doi.org/10.1038/srep37368

IF: 4.6

2016-01-01

Scientific Reports

Abstract:Growing MnO2 nanocrystals in the bulk of porous carbon nanofibers is conducted in a KMnO4 aqueous solution aimed to enhance the electrochemical performance of MnO2. The rate of redox reaction between KMnO4 and carbon was controlled by the concentration of KMnO4 in a neutral solution. The MnO2 nanoparticles grow along with (211) crystal faces when the redox reaction happens on the surface of fibers under 1D constraint, while the nanoparticles grow along with (200) crystal faces when the redox reaction happens in the bulk of fibers under 3D constraint. The composite, where MnO2 nanoparticles are formed in the bulk under a constraint, yields an electrode material for supercapacitors showing good electron transport, rapid ion penetration, fast and reversible Faradaic reaction, and excellent rate performance. The capacitance of the composite electrode could be 1282 F g-1 under a current density of 0.2 A g-1 in 1 M Na2SO4 electrolyte. A symmetric supercapacitor delivers energy density of 36 Wh kg-1 with power density of 39 W kg-1, and can maintain 7.5 Wh kg-1 at 10.3 kW kg-1. It exhibits an excellent electrochemical cycling stability with 101% initial capacitance and 95% columbic efficiency even after 1000 cycles of charge/discharge.
In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Cong Li,Chun Liu,Honglei Liu,Chengzhi Hu,Yong Wu,Afei Li,Zhangxian Chen,Zeheng Yang,Weixin Zhang

DOI: https://doi.org/10.1039/d3nr00780d

IF: 6.7

2023-05-06

Nanoscale

Abstract:Ni-rich LiNi x Co y Mn 1− x − y O 2 (0.5 < x < 1) cathode materials have attracted considerable interest due to their high energy density and low cost. However, they are subject to capacity fading during cycling, such as structural degradation and irreversible oxygen release, especially under high voltage. Herein, we report an in situ epitaxial growth strategy to construct a thin layer of LiNi 0.25 Mn 0.75 O 2 on the surface of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811). Both of them share the same crystal structure. Interestingly, the LiNi 0.25 Mn 0.75 O 2 layer can be electrochemically converted into a stable spinel LiNi 0.5 Mn 1.5 O 4 (LNM) due to the Jahn–Teller effect under high voltage cycling. The derived LNM protective layer can effectively alleviate the harmful side reactions between the electrode and electrolyte and suppress oxygen release as well. Furthermore, the coating LNM layer can enhance Li + ion diffusion due to its three-dimensional channels for Li + ion transport. When used as half-cells with lithium as the anode, NCM811@LNM-1% realizes a large reversible capacity of 202.4 mA h g −1 at 0.5 C, with high capacity retention of 86.52% at 0.5 C and 82.78% at 1 C, respectively, after 200 cycles in the voltage range of 2.8–4.5 V. Moreover, the assembled pouch full-cell with NCM811@LNM-1% as cathode and commercial graphite as an anode can deliver 11.63 mA h capacity with a high capacity retention of 80.05% after 139 cycles in the same voltage range. This work demonstrates a facile approach to the fabrication of NCM811@LNM cathode materials for enhancing performance in lithium-ion batteries under high voltage, rendering its promising applications.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Self-templating synthesis of single crystalline LiNi0.5Mn1.5O4 nanotubes with improved electrochemical performance

guoqing wang,jian xie,tiejun zhu,gaoshao cao,xinbing zhao,shichao zhang

DOI: https://doi.org/10.1142/S179360471450009X

IF: 1.4901

2014-01-01

Functional Materials Letters

Abstract:Single crystalline lithium nickel manganese oxide (LiNi0.5Mn1.5O4) nanotubes have been prepared by a facile self-templating method from beta-MnO2 nanotubes. The wall thickness and hollow part of the nanotubes are around 250 nm and 200 nm, respectively. The tubular LiNi0.5Mn1.5O4 exhibits good rate capability and high-rate cycling stability. At 10 C, it can yield a high discharge capacity of 99 mAh g(-1). After 550 cycles at 5 C, a discharge capacity of 85 mAhg(-1) can be kept, indicating a promising application in high-power Li-ion batteries.
One-Step Synthesis of Mno2 Flower/Carbon Nanotube with Improved Lithium Storage Properties

Zhuang Liu,Yongmin Wu,Jinghong Li

DOI: https://doi.org/10.1166/jnn.2015.9207

2015-01-01

Journal of Nanoscience and Nanotechnology

Abstract:This work reports a one-step hydrothermal synthesis of MnO2-flower/Carbon nanotube (CNTs) binary material, featuring a coated-worm like structure. The material showed a specific capacity of 800 mA h g(-1), a working plateau at 0.5 V against a Li+/Li electrode, and ideal stability under a current density of 2 A g(-1). The transition of the crystalline form of MnO2 was also observed when adjusting the ratio of CNTs in the reaction, which may be an intriguing result for the material's future application.
A Highly-Lithiophilic Mn 3 O 4 /ZnO-Modified Carbon Nanotube Film for Dendrite-Free Lithium Metal Anodes

Yuting Zhu,Yunfei Yang,Huimin Zhang,Shuxuan Liu,Zhuorun Wu,Chengkai Wu,Xuehui Gao,Enlai Hu,Zhongwei Chen

DOI: https://doi.org/10.1016/j.jcis.2023.05.101

IF: 9.9

2023-06-10

Journal of Colloid and Interface Science

Abstract:Lithium metal anode is deemed as a potential candidate for high energy density batteries, which has attracted increasing attention. Unfortunately, Li metal anode suffers from issues such as dendrite grown and volume expansion during cycling, which hinders its commercialization. Herein, we designed a porous and flexible self-supporting film comprising of single-walled carbon nanotube (SWCNT) modified with a highly-lithiophilic heterostructure (Mn 3 O 4 /Z) as the host material for Li metal anodes. The p- n -type heterojunction constructed by Mn 3 O 4 and ZnO generates a built-in electric field that facilitates electron transfer and Li + migration. Additionally, the lithiophilic Mn 3 O 4 /ZnO particles serve as the pre-implanted nucleation sites, dramatically reducing the lithium nucleation barrier due to their strong binding energy with lithium atoms. Moreover, the interwoven SWCNT conductive network effectively lowers the local current density and alleviates the tremendous volume expansion during cycling. Thanks to the aforementioned synergy, the symmetric cell composed of Mn 3 O 4 / can stably maintain a low potential for more than 2500 h at 1 mA cm −2 and 1 mAh cm −2 . Furthermore, the Li-S full battery composed of Mn 3 O 4 / also shows excellent cycle stability. These results demonstrate that Mn 3 O 4 / has great potential as a dendrite-free Li metal host material.

chemistry, physical

ChemInform Abstract: Direct Growth of Flexible LiMn2O4/CNT Lithium‐Ion Cathodes.

Direct growth of flexible LiMn2O4/CNT lithium-ion cathodes.

ChemInform Abstract: α-MnO2Nanotubes: High Surface Area and Enhanced Lithium Battery Properties.

Direct Growth of Flexible Carbon Nanotube Electrodes

A Dual-Carbon-anchoring Strategy to Fabricate Flexible LiMn2O4 Cathode for Advanced Lithium-Ion Batteries with High Areal Capacity

A one-step dynamic hydrothermal method for the synthesis of orthorhombic LiMnO2/CNTs nanocomposites networks for Li-ion batteries

Direct growth of MnO2 on carbon fiber cloth for electrochemical capacitor

High Rate LiMn2O4/carbon Nanotube Composite Prepared by a Two-Step Hydrothermal Process

Enhancing the electrochemical performance of Li-rich cathode material by a flexible precursor treatment method

ChemInform Abstract: Self‐Supported Formation of Needlelike Co3O4 Nanotubes and Their Application As Lithium‐Ion Battery Electrodes.

ChemInform Abstract: Α‐mno2 Nanotubes: High Surface Area and Enhanced Lithium Battery Properties.

Facile Synthesis of Birnessite δ-MnO 2 and Carbon Nanotube Composites as Effective Catalysts for Li-CO 2 Batteries

Preparation and Electrochemical Performance of Li_2MnSiO_4/CNTs Composite Cathode Material for Lithium Ion Batteries

Single-Crystalline Limn2o4 Nanotubes Synthesized Via Template-Engaged Reaction As Cathodes for High-Power Lithium Ion Batteries

Inward growth of superthin TiC skin on carbon nanotube framework as stable cathode support for Li–O2 batteries

Ultralong MnO@C nanowires with internal voids anchored between graphene as a robust high performance anode for flexible Li-Ion battery

In-situ Growth of MnO2 Crystals under Nanopore-Constraint in Carbon Nanofibers and Their Electrochemical Performance

In situ epitaxial growth and electrochemical conversion of LiNi0.5Mn1.5O4 thin layer on Ni-rich cathode materials for high voltage lithium-ion batteries

Self-templating synthesis of single crystalline LiNi0.5Mn1.5O4 nanotubes with improved electrochemical performance

One-Step Synthesis of Mno2 Flower/Carbon Nanotube with Improved Lithium Storage Properties

A Highly-Lithiophilic Mn 3 O 4 /ZnO-Modified Carbon Nanotube Film for Dendrite-Free Lithium Metal Anodes