Abstract:Co-free Li-rich Mn-based layered oxides (LRMLOs) are attractive cathode materials for lithium-ion batteries due to their low cost, high energy density and environmental friendliness. However, they also suffer from the drawbacks of low initial Coulombic efficiency, rapid voltage fading and capacity decay, and poor rate performance as the general LRMLO cathode, which prevent their practical applications. In the present work, a multilayer surface coating composed of Li 2 B 4 O 7 /B 2 O 3 and a spinel heterostructure rich-in oxygen vacancies are in-situ formed at the surface of the Co-free LRMLO particles by a facile thermal reduction treatment with NH 4 B 5 O 8 . The multilayer surface improves greatly the electron and ion conductivities, and plays significantly synergistic roles on suppressing oxygen release, reducing the dissolution of Mn and Ni elements, retarding the structure transformation from layered to spinel, and preventing the side reaction of the active material with electrolyte during cycling for the cathodes. As a result, the overall electrochemical properties of the cathodes are significantly improved. With an optimized addition of 10 wt% NH 4 B 5 O 8 , the initial Coulombic efficiency of the cathode is as high as 90.0%, and a capacity of 275 mAh g -1 is obtained at 0.1 C (1 C = 200 mA g -1 ) with the capacity retention of 98.5% after 100 cycles. A capacity of 194 mAh g -1 is maintained after 300 cycles at 1 C, with the capacity retention of 92.8%. A capacity of 117 mAh g -1 is obtained at a high rate of 20 C. In addition, the voltage fading during cycling is also greatly inhibited. The structure evolution of the cathode material during cycling is systematically investigated and the mechanism for the improved electrochemical properties is proposed. The present work provides a new surface structure design strategy and the method for enhancing the overall electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes.

Enhancing the electrochemical performance of Li-rich cathode material by a flexible precursor treatment method

Improving electrochemical performance of Li-rich cathode materials via adjusting the components

Enhanced electrochemical performance of La-doped Li-rich layered cathode material

Enhanced rate capability and cycling stability of lithium-rich cathode material Li1.2Ni0.2Mn0.6O2 via H3PO4 pretreating and accompanying Li3PO4 coating

Improving electrochemical performance of NCM811 cathodes for lithium-ion batteries via consistently arranging the hexagonal nanosheets with exposed {104} facets

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Enhanced Electrochemical Performance of LiNi0.8Co0.1Mn0.1O2 Cathode for Lithium-Ion Batteries by Precursor Preoxidation

Exploit Li 2 MnO 3 activity by two phase coexistence at atomic level towards high performance Mn-based Co-free Li-rich cathodes

Enhanced Electrochemical Performance of Li1.2mn0.54ni0.13co0.13o2 Cathode with an Ionic Conductive Livo3 Coating Layer

The positive role of the single crystal morphology in improving the electrochemical performance of Li-rich cathode materials

The preparation and electrochemical study of LiNi0.6Co0.2Mn0.2O2 cathode material for lithium-ion battery

Manipulating the Electronic Structure of Li‐Rich Manganese‐Based Oxide Using Polyanions: Towards Better Electrochemical Performance

Stabilizing surface chemical and structural Ni-rich cathode via a non-destructive surface reinforcement strategy

Facile oxidant-assisted treatment to improve the cyclic performance of Li-rich cathode materials

Enhanced electrochemical performance of cobalt oxide layers coated LiNi0.8Co0.1Mn0.1O2 by polyvinylpyrrolidone-assisted method cathode for Li-ion batteries

Enhancing electrochemical performance of lithium-rich manganese-based cathode materials through lithium sulfate coating

In-situ formation of Li0.5Mn0.5O coating layer through defect controlling for high performance Li-rich manganese-based cathode material

Epoxy-functionalized silane grafting enhances the cycling performances of Li1.2Ni0.13Co0.13Mn0.54O2 cathode materials

Improved Electrochemical Performance of Li-Rich Cathode Materials via Spinel Li2MoO4 Coating

Improving the rate performance of LiMn0.5Fe0.5PO4/C materials by the precursor method

Accelerating the Activation of Li2MnO3 in Li-rich High-Mn Cathodes to Improve Its Electrochemical Performance.