Abstract:Co-free Li-rich Mn-based layered oxides (LRMLOs) are attractive cathode materials for lithium-ion batteries due to their low cost, high energy density and environmental friendliness. However, they also suffer from the drawbacks of low initial Coulombic efficiency, rapid voltage fading and capacity decay, and poor rate performance as the general LRMLO cathode, which prevent their practical applications. In the present work, a multilayer surface coating composed of Li 2 B 4 O 7 /B 2 O 3 and a spinel heterostructure rich-in oxygen vacancies are in-situ formed at the surface of the Co-free LRMLO particles by a facile thermal reduction treatment with NH 4 B 5 O 8 . The multilayer surface improves greatly the electron and ion conductivities, and plays significantly synergistic roles on suppressing oxygen release, reducing the dissolution of Mn and Ni elements, retarding the structure transformation from layered to spinel, and preventing the side reaction of the active material with electrolyte during cycling for the cathodes. As a result, the overall electrochemical properties of the cathodes are significantly improved. With an optimized addition of 10 wt% NH 4 B 5 O 8 , the initial Coulombic efficiency of the cathode is as high as 90.0%, and a capacity of 275 mAh g -1 is obtained at 0.1 C (1 C = 200 mA g -1 ) with the capacity retention of 98.5% after 100 cycles. A capacity of 194 mAh g -1 is maintained after 300 cycles at 1 C, with the capacity retention of 92.8%. A capacity of 117 mAh g -1 is obtained at a high rate of 20 C. In addition, the voltage fading during cycling is also greatly inhibited. The structure evolution of the cathode material during cycling is systematically investigated and the mechanism for the improved electrochemical properties is proposed. The present work provides a new surface structure design strategy and the method for enhancing the overall electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes.

Enhanced Electrochemical Performance of Li1.2mn0.54ni0.13co0.13o2 Cathode with an Ionic Conductive Livo3 Coating Layer

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

Enhanced Electrochemical Performance of Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material Coated with Li+-conductive Li2SiO3 for Lithium Ion Batteries

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Multifunctional surface structure with enhanced electron and ion conductivities for superior electrochemical performance of Co-free Li-rich Mn-based layered oxide cathodes

Facile Synthesis and Enhanced Electrochemical Performances of Li2tio3-Coated Lithium-Rich Layered Li1.13ni0.30mn0.57o2 Cathode Materials for Lithium-Ion Batteries

Enhancing electrochemical performance of lithium-rich manganese-based cathode materials through lithium sulfate coating

Improved electrochemical performance of layered Li1.2Ni0.13Co0.13Mn0.54O2 cathode material via VPO5 coating

Integrated co-modification of PO43− polyanion doping and Li2TiO3 coating for Ni-rich layered LiNi0.6Co0.2Mn0.2O2 cathode material of Lithium-Ion batteries

A Novel Perovskite Electron-Ion Conductive Coating to Simultaneously Enhance Cycling Stability and Rate Capability of Li1.2Ni0.13Co0.13Mn0.54O2 Cathode Material for Lithium-Ion Batteries

One-pot synthesis and multifunctional surface modification of lithium-rich manganese-based cathode for enhanced structural stability and low-temperature performance

In Situ Surface Coating and Oxygen Vacancy Dual Strategy Endowing a Li-Rich Li 1.2 Mn 0.55 Ni 0.11 Co 0.14 O 2 Cathode with Superior Lithium Storage Performance

Improved Electrochemical Performance of Li-Rich Cathode Materials via Spinel Li2MoO4 Coating

Improving electrochemical performances of Lithium-rich oxide by cooperatively doping Cr and coating Li3PO4 as cathode material for Lithium-ion batteries

Enhanced electrochemical performance of LiV2O4-coated and V4+-doped LiNi0.8Co0.1Mn0.1O2 cathode for lithium-ion batteries

An Li-rich oxide cathode material with mosaic spinel grain and a surface coating for high performance Li-ion batteries

Enhanced Electrochemical Performance of Perovskite LaNiO3 Coating on Li1.2Mn0.54Ni0.13Co0.13O2 As Cathode Materials for Li-ion Batteries

In-situ formation of Li0.5Mn0.5O coating layer through defect controlling for high performance Li-rich manganese-based cathode material

Enhanced electrochemical properties and thermal stability of Zr4+ doped Li1.20Mn0.54Ni0.13Co0.13O2 cathode material by a Li ion conductor of Li3PO4 surface coating

Amorphous Li2ZrO3 nanoparticles coating Li[Li0·17Mn0·58Ni0.25]O2 cathode material for enhanced rate and cyclic performance in lithium ion storage

Surface Coating with Li-Ti-O to Improve the Electrochemical Performance of Ni-rich Cathode Material