Abstract:Li–CO2 batteries have recently attracted attention as promising candidates for next-generation energy storage devices due to their extremely high theoretical energy density. The real application of Li–CO2 cells involves addressing several drawbacks, including high charging potential, poor coulombic efficiency, and low rechargeability. Molybdenum disulfide supported on carbon nanotubes (MoS2/CNT) with various ratios functioned as a cathode catalyst for Li–CO2 batteries. The optimal MoS2/CNT composite achieved a maximum discharge capacity of 8551 mAh g–1 with a coulombic efficiency of 96.7%. This hybrid also obtained an initial charging plateau of 3.87 V at a current density of 100 mA g–1 with a cutoff capacity of 500 mAh g–1. It provided ideal electrochemical stability of 142 cycles at the current densities of 100 mA g–1, which was comparable with that of some precious metal catalysts. This optimized MoS2/CNT was also cycled at 200 and 400 mA g–1 for 112 and 55 times, respectively. Density functional theory calculations demonstrated that the sulfided Mo-edge (s-Mo-edge) on MoS2 materials showed appropriate adsorption strengths of Li, CO2, and Li2CO3. Moreover, joint results of Raman profiles and extended X-ray absorption fine structure spectra elucidated that the catalytic efficiencies of MoS2/CNT hybrids were proportional to the quantities of exposed s-Mo-edge active sites.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c17942?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c17942</a>.Computational method; XPS spectra of bare MoS2 and MoS2/CNT catalysts (Figure S1); full discharge–charge profiles of bare CNT and bare MoS2 cathodes (Figure S2); SEM with elemental mapping spectra of bare MoS2 and MoS2/CNT catalysts (Figure S3); electrochemical impedance spectroscopy of bare MoS2 and MoS2/CNT cathodes (Figure S4); cycling performances of bare CNT, MoS2/CNT, and MoS2-CNT cathodes (Figure S5–S7, S9); photograph and XRD diagrams of electrodes after the cycling measurement (Figure S8); high-resolution Mo 3d XPS spectrum of MoS2/CNT cathode (Figure S10); calculated adsorption energies of Li, CO2, and Li2CO3 on different sites of MoS2 (Figure S11–S13); charge density difference of CO2 on different sites of MoS2 (Figure S14); comparisons of electrochemical performances with previous studies (Table S1); and fitting parameters for Mo EXAFS spectra (Table S2) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c17942/suppl_file/am0c17942_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Facile Synthesis of Birnessite δ-MnO 2 and Carbon Nanotube Composites as Effective Catalysts for Li-CO 2 Batteries

Hierarchical Ti 3 C 2 T x MXene/Carbon Nanotubes for Low Overpotential and Long-Life Li-CO 2 Batteries

Theoretical Study of Catalytic Performance of Pristine M2C and Oxygen-Functionalized M2CO2 MXenes As Cathodes for Li-N2 Batteries

Porous Mn2O3 Cathode for Highly Durable Li-CO2 Batteries

Peanut Shaped MnCo2O4 Winded by Multi-Walled Carbon Nanotubes As an Efficient Cathode Catalyst for Li-O-2 Batteries

Carbon nanotubes with CoNi alloy nanoparticles growing on porous carbon substrate as cathode for Li-CO 2 batteries

Improved Cycle Performance of Li-CO2 Batteries with Nickel Manganite Supported Carbon Nanotube NiMn2O4 @CNT Cathode

Catalytically Active Site Identification of Molybdenum Disulfide as Gas Cathode in a Nonaqueous Li–CO 2 Battery

Dispersed Mn2Co2C nanoparticles in interconnected nitrogen-doped carbon framework as cathode catalysts for efficient and long-life Li-CO2 batteries

Metal–Organic Framework-Derived Porous NiCo-Layered Double Hydroxide@MnO 2 Hierarchical Nanostructures as Catalytic Cathodes for Long-Life Li–O 2 Batteries

Promoting the Performance of Li–CO2 Batteries via Constructing Three-Dimensional Interconnected K+ Doped MnO2 Nanowires Networks

Carbon Nanotube@RuO2 As a High Performance Catalyst for Li-CO2 Batteries

Engineering the Active Sites of Graphene Catalyst: From CO 2 Activation to Activate Li-CO 2 Batteries

Ultrafine Co-Doped NiO Nanoparticles Decorated on Carbon Nanotubes Improving the Electrochemical Performance and Cycling Stability of Li–CO 2 Batteries

Mo 2 C / CNT : an Efficient Catalyst for Rechargeable Li – CO 2 Batteries

Integrated Carbon Nanotube/MoO 3 Core/Shell Arrays as Freestanding Air Cathodes for Flexible Li–CO 2 Batteries

Porous MnO as efficient catalyst towards the decomposition of Li 2 CO 3 in ambient Li-air batteries

Mo2C quantum dots decorated ultrathin carbon nanosheets self-assembled into nanoflowers toward highly catalytic cathodes for Li-O2 batteries

Activating MoS 2 Nanoflakes via Sulfur Defect Engineering Wrapped on CNTs for Stable and Efficient Li‐O 2 Batteries

Revealing the Indispensable Role of In Situ Electrochemically Reconstructed Mn(II)/Mn(III) in Improving the Performance of Lithium‐Carbon Dioxide Batteries

Mnco2o4 Decorated Magneli Phase Titanium Oxide As A Carbon-Free Cathode for Li-O-2 Batteries