Abstract:Orthorhombic LiMnO2 (o-LiMnO2) is considered as a potential cathode material for lithium ion batteries due to its high theoretical capacity and low cost. However, the irreversible phase transformation to spinel LiMn2O4 and sluggish lithium ion diffusion kinetics result in low practical specific capacity and poor cycling stability. In this work, conductive o-LiMnO2/carbon nanotubes (CNTs) composites frameworks were constructed via an ingenious one-step dynamic hydrothermal method. The obtained o-LiMnO2/CNTs composites achieved outstanding electrochemical performance upon adjustment of the CNTs content. The results demonstrated either physical introduction of 1 wt% CNTs into o-LiMnO2 or in-situ formed o-LiMnO2/CNTs composite with 0.5 wt% CNTs could improve electrochemical performance effectively compared with pristine o-LiMnO2. However, when the content of CNTs increased to 1 wt% in in-situ formed o-LiMnO2/CNTs, the specific capacity reached 194.4 mAh g−1 and retention rate was 93.7% after 50 cycles at 0.1C. Moreover, the in-situ formed composite with 5 wt% CNTs led to the optimum specific capacity of 204.9 mAh g−1 and a high capacity retention rate (97.7% after 50 cycles at 0.1C). Galvanostatic intermittent titration technique (GITT) measurement also demonstrated that 5 wt% CNTs in o-LiMnO2/CNTs composite drastically improved the slowest Li+ diffusion step by a factor 100 times after 30 cycles as compared to the pristine counterpart. This behaviour demonstrated an accelerated diffusion of lithium through this new approach and improved reversibility of charging-discharging.

One-Step Synthesis of Mno2 Flower/Carbon Nanotube with Improved Lithium Storage Properties

Hydrothermal Synthesis of Monodispersed LiMnPO4 (010) Nanobelts and [001] Nanorods and Their Applications in Lithium-Ion Batteries

Assembled Graphene Nanotubes Decorated by Hierarchical MoS2 Structures: Enhanced Lithium Storage and in Situ TEM Lithiation Study

One-pot synthesis of nanosized MnO incorporated into N-doped carbon nanosheets for high performance lithium storage

One-step Synthesis of B and N Co-Doped Carbon Nanotubes for High-Stability Lithium-Ion Batteries

Mno@1-D Carbon Composites from the Precursor C4h4mno6 and Their High-Performance in Lithium Batteries

α-MnO 2 nanotubes: High surface area and enhanced lithium battery properties

Hydrothermal Synthesis of Multiwalled Carbon Nanotube-Zinc Manganate Nanoparticles As Anode Materials for Lithium Ion Batteries.

High Rate LiMn2O4/carbon Nanotube Composite Prepared by a Two-Step Hydrothermal Process

MnxOy Embedded Within CNT Supporting Porous Carbon for Enhanced Lithium Storage

Facile Synthesis of Porous MnO/C Nanotubes As a High Capacity Anode Material for Lithium Ion Batteries.

A Facile Route to Synthesize Nano-Mno/c Composites and Their Application in Lithium Ion Batteries

Chemically Integrated Multiwalled Carbon Nanotubes/Zinc Manganate Nanocrystals As Ultra Long-Life Anode Materials for Lithium-Ion Batteries

One-pot facile synthesis of hierarchical hollow microspheres constructed with MnO2 nanotubes and their application in lithium storage and water treatment

Self-templating synthesis of single crystalline LiNi0.5Mn1.5O4 nanotubes with improved electrochemical performance

A one-step dynamic hydrothermal method for the synthesis of orthorhombic LiMnO2/CNTs nanocomposites networks for Li-ion batteries

Tio2 Nanotube Arrays Grafted With Mno2 Nanosheets As High-Performance Anode For Lithium Ion Battery

Carboxylated carbon nanotube anchored MnCO3 nanocomposites as anode materials for advanced lithium-ion batteries

A Novel One-Step Strategy Toward ZnMn2O4/N-doped Graphene Nanosheets with Robust Chemical Interaction for Superior Lithium Storage

Reshaping carbon-coated Mn2Mo3O8 nanotubes and enhanced sodium storage performance

Rational Design of Graphene-Reinforced MnO Nanowires with Enhanced Electrochemical Performance for Li-Ion Batteries.