Abstract:Flexible wearable electronics have been developing rapidly in recent years, and one of its core devices, thin‐film transistor (TFT), is also attracting attention. Current TFT preparation processes usually require high annealing temperatures (>350°C), which is not conducive to their application on most flexible substrates (PET, PEN and nanopaper, etc.). In this paper, we propose a strategy for the room temperature preparation of Nd:AIZO/Al2O3 dual‐layer TFT devices, which have appreciable electrical properties without additional annealing treatment. We have used Taguchi orthogonal experimental methods to investigate the effects of three essential process parameters on the performance of the films and devices. We analyze the test results of XRR, μ‐PCD, XPS of the films and correlate them with TFTs electrical performance. As Nd:AIZO deposition time decreases and Al2O3 oxygen percentage and time during deposition increase, the μsat and SS of TFT devices are improved. With the preferred combination of parameters applied to the device preparation, the device exhibits a saturation mobility μsat of 24.3 cm2V‐1s‐1, a threshold voltage Vth of ‐1.4 V, a subthreshold swing SS of 0.21 V/decade and an Ion/Ioff ratio of 4.26×108. The ultra‐thin Al2O3 layer act as defect modification and form high‐speed electron transport in channel layer. This dual‐layer structure reduced the localized defect states in the back‐channel region and the water‐oxygen adsorption. The room temperature preparation of the dual‐layer TFT process proposed in this paper is compatible with large‐size low‐cost flexible substrates. It has great potential for application in green flexible wearable electronics. This article is protected by copyright. All rights reserved.

Performance Improvement with A Combined Scheme of Rapid Thermal Annealing and Multi-Channel Structure for Poly-Si Tfts with Various Device Dimensions

Effects of Rapid Thermal Annealing on Poly-Si TFT with Different Gate Oxide Thickness.

Performance Improvement of Low-Temperature Polycrystalline Silicon Thin-Film Transistors with Fluorinated Silicate Glass Drive-In Masking Layer

Performance Improvement of Excimer Laser Annealed Poly-Si TFTs Using Fluorine Ion Implantation

Fabrication of High Performance Low-Temperature Poly-Si Thin-Film Transistors Using A Modulated Process

Performance Enhancement of Indium Zinc Oxide Thin-Film Transistors Through Process Optimizations

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimizing Channel Structure

Performance Improvement of Pentacene-Based Organic Thin-Film Transistor with the Planar Bottom-Contact Structure and the Bi-Layer Gate Dielectric

Improvement in Characteristics of Low-Temperature Polycrystalline Silicon Thin Film Transistors with High-Efficiency and Low-Damage N2 Plasma Pretreatment

Optimized Optical Design of Thin-Film Transistor Arrays for High Transmittance and Excellent Chromaticity

Improvement in Performance and Reliability with Cf4 Plasma Pretreatment on the Buffer Oxide Layer for Low-Temperature Polysilicon Thin-Film Transistor

Polycrystalline-Silicon CMOS Thin-Film Transistors With T-Shaped Gate and Lightly Doped Drain

Performance Enhancement for Indium-Free Metal Oxide Thin-Film Transistors with Double-Active-Layers by Magnetron Sputtering at Room Temperature

Low-temperature and low thermal budget fabrication of polycrystalline silicon thin-film transistors

Improving TFT Device Performance by Changing the Thickness of the LZTO/ZTO Dual Active Layer

Performance Improvement of Oxide Thin-Film Transistors with a Two-Step-annealing Method

Enhancing the Performance of Solution-Processed Thin-Film Transistors Via Laser Scanning Annealing

High‐performance Nd: AIZO/Al2O3 dual active layer design without thermal annealing: high‐speed electron transport and defect modification in thin film transistors

Rapid Thermal Annealing for Carbon Nanotube Thin Film Transistors by a Double-Themral-region Furnace

Improving Performance of Tin-Doped-Zinc-Oxide Thin-Film Transistors by Optimized Multi-Stacked Active-Layer Structures