Abstract:In this study, we propose, fabricate, and examine the electrical characteristics of high-performance channel-engineered amorphous aluminum-doped zinc tin oxide (a-AZTO) thin-film transistors (TFTs). Amorphous indium gallium zinc oxide (a-IGZO) film with improved conductivity (obtained via rapid thermal annealing in vacuum) is applied as the local conductive buried layer (LCBL) of the channel-engineered a-AZTO TFTs. The optical transmittance of the a-IGZO and a-AZTO films in the visible region is >85%. The a-IGZO LCBL reduces the resistance of the a-AZTO channel, thereby resulting in increased drain current and improved device performance. We find that our fabricated channel-engineered a-AZTO TFTs with LCBLs are superior to non-channel-engineered a-AZTO TFTs without LCBLs in terms of electrical properties such as the threshold voltage, mobility, subthreshold swing, and on-off current ratios. In particular, as the a-IGZO LCBL length at the bottom of the channel increases, the channel resistance gradually decreases, eventually resulting in a mobility of 22.8 cm²/V · s, subthreshold swing of 470 mV/dec, and on-off current ratio of 3.98×107. We also investigate the effect of the a-IGZO LCBL on the operational reliability of a-AZTO TFTs by measuring the variation in the threshold voltage for positive gate bias temperature stress (PBTS), negative gate bias temperature stress (NBTS), and negative gate bias temperature illumination stress (NBTIS). The results indicate that the TFT instability for temperature and light is not affected by the LCBL. Therefore, our proposed channel-engineered a-AZTO TFT can form a promising high-performance high-reliability switching device for next-generation displays.

Performance Improvement of Low-Temperature Polycrystalline Silicon Thin-Film Transistors with Fluorinated Silicate Glass Drive-In Masking Layer

Performance of Thin-Film Transistors with Ultrathin Ni-MILC Polycrystalline Silicon Channel Layers

Improvement in Performance and Reliability with Cf4 Plasma Pretreatment on the Buffer Oxide Layer for Low-Temperature Polysilicon Thin-Film Transistor

Performance Improvement of Excimer Laser Annealed Poly-Si TFTs Using Fluorine Ion Implantation

Low-temperature and low thermal budget fabrication of polycrystalline silicon thin-film transistors

Performance Improvement with A Combined Scheme of Rapid Thermal Annealing and Multi-Channel Structure for Poly-Si Tfts with Various Device Dimensions

Fabrication of High Performance Low-Temperature Poly-Si Thin-Film Transistors Using A Modulated Process

Low-Temperature-Processed Polycrystalline Silicon Thin-Film Transistors with Stable Solid-State Continuous-Wave Laser Crystallization

Mobility improvement of LTPS thin film transistor using stacked capping layer

Teflon/SiO2 Bilayer Passivation for Improving the Electrical Reliability of Oxide TFTs Fabricated Using a New Two-Photomask Self-Alignment Process

Low Thermal Budget Poly-Si Thin Film Transistors on Glass

Improvement in Characteristics of Low-Temperature Polycrystalline Silicon Thin Film Transistors with High-Efficiency and Low-Damage N2 Plasma Pretreatment

A cost-effective fluorination method for enhancing the performance of metal oxide thin-film transistors

Ultrahigh-Performance Polycrystalline Silicon Thin-Film Transistors on Excimer-Laser-Processed Pseudo-Single-Crystal Films

Polycrystalline Silicon Thin Film Transistors on Corning 7059 Glass Substrates Using Short Time, Low-Temperature Processing

Preparation Progress on Low Temperature Polysilicon Films

Single-crystal silicon transistors in laser-crystallized thin films on bulk glass

Highly-Doped Region Optimization for Reduced Hot-Carrier Effects in Dual-Gate Low Temperature Polysilicon TFTs

A Self-Aligned A-Igzo Thin-Film Transistor Using a New Two-Photo-Mask Process with a Continuous Etching Scheme.

Low temperature processed poly-Si thin-film transistors with thinner LPD-SiO2 as gate insulator and its reliability

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing