Abstract:Nano‐size confined current paths were conducted at the silver‐silicon (Ag–Si) interface. And the laser‐induced electrons pass through the current paths during the laser enhanced contact optimization (LECO) treatment, resulting in nano‐sized Joule‐heating to promote the Ag–Si eutectic reaction, which improved the contact quality. Over the past decade, Tunnel Oxide Passivated Contact (TOPCon) solar cells have emerged as a leading technology for high‐efficiency silicon solar cells. Conventional metallization processes using silver/aluminum (Ag/Al) pastes encounter significant hurdles due to reliability risks and insufficient contact quality. Recent advancements in laser‐induced metallization technologies, particularly laser‐enhanced contact optimization (LECO), offer promising solutions. However, the mechanism of silver‐silicon (Ag–Si) contact formation on the P+ emitter of TOPCon cells via LECO processing remains incompletely understood. This study designs and prepares two types of glass frits (GF‐A and GF‐B) for TOPCon cells and investigates the electrical properties of corresponding devices. Advanced techniques are employed to examine the Ag–Siinterfaces. The results demonstrate that GF‐A‐based TOPCon cells (Cell‐A) outperformed GF‐B‐based cells (Cell‐B) due to the construction of a current‐confined Ag–Si interface. A composite conductive model for the Ag–Si interfaces by LECO treatment is introduced, revealing the nano‐size Joule‐heating to achieve the Ag–Si eutectic structure as the underlying formation mechanism. This work contributes to the understanding of metal‐silicon contact optimization in solar cells and introduces novel methodologies for laser‐induced synthesis and micro‐nano interface engineering.

Optimization of Shunt Isolation Processing for Silicon Solar Cells Via Laser and Chemical Etching

Finite element model of femtosecond laser scribing on silicon heterojunction solar cells

Elimination of Severe Shunting Problems Due to Air-Side Electrode Formation on Evaporated Poly-Si Thin-Film Solar Cells on Glass

A Novel Laser Scribing Method Combined with the Thermal Stress Cleaving for the Crystalline Silicon Solar Cell Separation in Mass Production

Improvement of conversion efficiency of multicrystalline silicon solar cells by incorporating reactive ion etching texturing

Ultrafast laser-annealing of hydrogenated amorphous silicon in tunnel oxide passivated contacts for high-efficiency n-type silicon solar cells

Solar cell Edge shunt isolation : A simplified approach

Improving the efficiency of crystalline silicon solar cells by an intersected selective laser doping

Post-Separation Processing for Silicon Heterojunction Half Solar Cells With Passivated Edges

Performance improvement of amorphous silicon see-through solar modules with high transparency by the multi-line ns-laser scribing technique

Experimental Study on the Elimination of Over-Plating Problems in Industrial Manufacturing of Large-Area Acidic-Textured Laser-Doped Multi-Crystalline Solar Cells

Improved Surface Passivation by Wet Texturing, Ozone‐Based Cleaning, and Plasma‐Enhanced Chemical Vapor Deposition Processes for High‐Efficiency Silicon Heterojunction Solar Cells

Compensating Cutting Losses by Passivation Solution for Industry Upgradation of TOPCon and SHJ Solar Cells

A concept for Lithography-free patterning of silicon heterojunction back-contacted solar cells by laser processing

Multicrystalline Silicon Thin‐Film Solar Cells Based on Vanadium Oxide Heterojunction and Laser‐Doped Contacts

Nano‐size Joule‐Heating to Achieve Low‐Ohmic Ag–Si Contact on Boron Emitters of n‐TOPCon Solar Cells

Damp-Heat-Stable, High-Efficiency, Industrial-Size Silicon Heterojunction Solar Cells

Silicon heterojunction back contact solar cells by laser patterning

Edge Effect in Silicon Solar Cells with Dopant-Free Interdigitated Back-Contacts

Progress of plated metallization for industrial bifacial TOPCon silicon solar cells

Improvement of Laser-Induced Damage on High-Efficiency Solar Cells via Top-Hat Beam Ablation