Abstract:A crystalline silicon (c-Si) solar cell with a polycrystalline silicon/SiOx (poly-Si/SiOx) structure, incorporating both electron and hole contacts, is an attractive choice for achieving ideal carrier selectivity and serving as a fundamental component in high-efficiency perovskite/Si tandem and interdigitated back-contact solar cells. However, our understanding of the carrier transport mechanism of hole contacts remains limited owing to insufficient studies dedicated to its investigation. There is also a lack of comparative studies on the poly-Si/SiOx electron and hole contacts for ideal carrier-selective solar cells. Therefore, this study aims to address these knowledge gaps by exploring the relationship among microstructural evolution, dopant in-diffusion, and the resulting carrier transport mechanism in both the electron and hole contacts of poly-Si/SiOx solar cells. Electron (n+ poly-Si/SiOx/substrate)- and hole (p+ poly-Si/SiOx/substrate)-selective passivating contacts are subjected to thermal annealing. Changes in the passivation properties and carrier transport mechanisms of these contacts are investigated during thermal annealing at various temperatures. Notably, the results demonstrate that the passivation properties and carrier transport mechanisms are strongly influenced by the microstructural evolution of the poly-Si/SiOx layer stack and dopant in-diffusion. Furthermore, electron and hole contacts exhibit common behaviors regarding microstructural evolution and dopant in-diffusion. However, the hole contacts exhibit relatively inferior electrical properties overall, mainly because both the SiOx interface and the p+ poly-Si are found to be highly defective. Moreover, boron in the hole contacts diffuses deeper than phosphorus in the electron contacts, resulting in deteriorated carrier collection. The experimental results are also supported by device simulation. Based on these findings, design rules are suggested for both electron and hole contacts, such as using thicker SiOx and/or annealing the solar cell at a temperature not exceeding the critical annealing temperature of the hole contacts.

Elimination of Severe Shunting Problems Due to Air-Side Electrode Formation on Evaporated Poly-Si Thin-Film Solar Cells on Glass

Effect of Surface Texture on Pinhole Formation in SiO x-Based Passivated Contacts for High-Performance Silicon Solar Cells

(Invited) Defects in Cast-Mono Crystalline Silicon

Progress in screen-printed metallization of industrial solar cells with SiOx/poly-Si passivating contacts

Optimization of Shunt Isolation Processing for Silicon Solar Cells Via Laser and Chemical Etching

Interplay of annealing temperature and doping in hole selective rear contacts based on silicon-rich silicon-carbide thin films

Design Rule of Electron- and Hole-Selective Contacts for Polycrystalline Silicon-Based Passivating Contact Solar Cells

Differently shaped Ag crystallites and four current transport paths at sintered Ag/Si interface of crystalline silicon solar cells

Stable Dopant-Free Electron-Selective Contact for Silicon Solar Cells

Polysilicon Passivating Contacts for Silicon Solar Cells: Interface Passivation and Carrier Transport Mechanism

Identifying and Removing the Interfacial States in Metal-Oxide-Semiconductor Schottky Si Photoanodes for the Highest Fill Factor

Post-Separation Processing for Silicon Heterojunction Half Solar Cells With Passivated Edges

Experimental Study Of 3d Solid-Liquid Interfaces And Their Influence On Directional Solidification Silicon Ingot

Current status and challenges for hole-selective poly-silicon based passivating contacts

Qualitative Damage Assessment of Laser Contact Opening and Microstructural Evolution at the Rear Contact of a Perc Mono Crystalline Si Solar Cell upon Co-Firing with Si Doped Al Paste

Novel polysilicon in resisting thermal-evaporation Al-electrode damage and its application in back-junction passivated contact p-type solar cells

Edge passivation of shingled poly-Si/SiOx passivated contacts solar cells

Pinhole density and contact resistivity of carrier selective junctions with polycrystalline silicon on oxide

Removing Leakage and Surface Recombination in Planar Perovskite Solar Cells

Interfacial Engineering of Cu 2 O Passivating Contact for Efficient Crystalline Silicon Solar Cells with an Al 2 O 3 Passivation Layer

Macroscopic Study on Current Transport Path in Front‐Side Contacts of Crystalline Silicon Solar Cells