Abstract:AlN films have been grown on nitrided and non-nitrided Al substrates by pulsed laser deposition (PLD) technology at 450 degrees C. The surface morphology, crystalline quality, and interfacial property of the as-grown AlN films on nitrided and non-nitrided Al substrates have been investigated systematically. It is found that the as-grown similar to 300 nm-thick AlN films on nitrided Al substrates show the very smooth surface with a root-mean-square (RMS) surface roughness of 1.5 nm, high crystalline quality with full-width at half-maximum (FWHM) values for AlN(0002) and AlN(10-12) X-ray rocking curves (XRCs) of 0.6 degrees and 0.9 degrees, and sharp and abrupt interfaces. These results are in striking contrast to those of similar to 300 nm-thick AlN films grown on non-nitrided Al substrates. The as-grown similar to 300 nm-thick AlN films on non-nitrided Al substrates show relatively rough surface with a RMS surface roughness of 4.0 nm, poor crystalline quality with FWHM values for AlN(0002) and AlN(10-12) XRCs of 1.1 degrees and 1.5 degrees, and a nm-thick interfacial layer. Based on the characterizations, the effect of Al substrates nitridation and the growth mechanism of AlN films grown on nitrided Al substrates by PLD are hence proposed. This work provides an effective approach for the growth of high-quality AlN films on Al substrates for the future application of AlN-based devices. (C) 2015 Elsevier B.V. All rights reserved.

Catalytic effect of Al and AlN interlayer on the growth and properties of containing carbon films

The Effect of Al Interlayers on the Growth of AlN on Si Substrates by Metal Organic Chemical Vapor Deposition

Growth feature of ionic nitrogen doped CN x bilayer films with Ti and TiN interlayer by pulse cathode arc discharge

TiN/AlN Nano Multilayers Film Fabricated by Plasma Enhanced Atomic Layer Deposition

Effect of Al Substrate Nitridation on the Properties of AlN Films Grown by Pulsed Laser Deposition and Its Mechanism

Epitaxial AlN film with improved quality on Si (111) substrates realized by boron pretreatment via MOCVD

Structural, Interface Texture and Toughness of TiAlN/CNx Multilayer Films

Improved Interfacial Adhesion Between TiAlN/DLC Multi-Layered Coatings by Controlling the Morphology Via Bias

Tribological properties of AlN/DLC modified layer on aluminum alloy with nitrogen and carbon plasma based ion implantation

Microstructure and Mechanical Properties of Carbon Nitride Multilayer Films Deposited by DC Magnetron Sputtering

Structure, mechanical and thermal properties of TiAlBN/TiAlN multilayers

Synthesis of Nanoscale CNx/TiAlN Multilayered Coatings by Ion-Beam-assisted Deposition

Growth and nucleation of diamond-like carbon (DLC) film on aluminum

Mechanical and thermal properties of AlN/Ti1-xAlxN (x = 0, 0.45 and 0.62) multilayers

Size Effect in the Titanium/diamond‐like Carbon Bilayer Films: Effect of Relative Thickness on Their Structure and Mechanical Properties

Effect of AlN Interlayer on Incorporation Efficiency of Al Composition in AlGaN Grown by MOVPE

Electrodeposition, microstructure, friction and electrochemical behavior of diamond-like carbon (DLC) films with Ni/Cu interlayer

Effect of Interface on Oxidation Behavior and Tribological Properties of CrAlN/SiNx Multilayer Films

Ab initio supported study on the selective adsorption-induced microstructural difference of (Ti,Al)N/TiN and (Ti,Al)N/ZrN multilayers

Influence of the Nucleation Layer Morphology on the Structural Property of AlN Films Grown on C-Plane Sapphire by MOCVD

Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating