Abstract:The high chemical activity, low thermal conductivity, and high strength of titanium alloys lead to severe tool wear during cutting. The coating applied to the tool surface insulates the effect of heat and chemical reactions. TiAlSiN coating and AlCrN coating are two representative coatings with excellent properties in TiN-based and CrN-based applications, respectively. Three types of nanocoatings—TiAlSiN monolayer, AlCrN monolayer, and TiAlSiN/AlCrN multilayer—were prepared, and the microstructure, mechanical properties, oxidation resistance, diffusion properties with titanium alloy, and cutting performance of the coatings were investigated utilizing SEM, TEM, XRD, TGA, GD-OES, nanoindentation, and scratching instruments. The hardness, elastic modulus, and adhesion strength of TiAlSiN/AlCrN multilayer coatings are between TiAlSiN monolayer and AlCrN monolayer coatings, which meet the "law of mixtures". Adhesion strength is the primary condition for cutting applications and should have a minimum threshold value. Ti and N elements are the most significant in the diffusion between coatings and titanium alloys. The nitride coating containing Cr aggravates the loss of N in contact with the titanium alloy. In addition, multilayer structural coatings can lead to more severe diffusion than monolayer coatings due to their inherent interlayer defects. Although diffusion between titanium alloys and coated tools is more severe than with other workpiece materials, the main factor affecting tool cutting life is still the H3/E*2 value determined by the hardness and modulus of elasticity together.

Mechanical and thermal properties of AlN/Ti1-xAlxN (x = 0, 0.45 and 0.62) multilayers

Structural, Mechanical, and Thermal Properties of the TiAlTaN/TiAlBN Multilayer

Structure, mechanical and thermal properties of TiAlBN/TiAlN multilayers

Structure, mechanical properties and thermal stability of CrAlNbN/TiN multilayers

Investigation on the Interface Structure, Mechanical Properties, and Thermal Stability of TiAlSiN/TiAlN Multilayers

The influence of multilayer structure on mechanical behavior of TiN/TiAlSiN multilayer coating

Growth, mechanical properties, and tribological performance of TiAlN/NbN and NbN/TiAlN bilayer coatings

Mechanical properties, thermal stability and oxidation resistance of TiN/CrN multilayer coatings

Influence of Bilayer Thickness on Mechanical and Tribological Properties of (Ti-Al)N/MoN Nanostructured Hard Coatings Deposited by Cathodic Arc Ion Plating

Influence of multi-interfacial structure on mechanical and tribological properties of TiSiN/Ag multilayer coatings

Structure and Thermomechanical Properties of Superlattice-Stabilized TiNbTaZrSiAlN High-Entropy Coating

Influence of Si and Ta mixed doping on the structure, mechanical and thermal properties of Ti Al N coatings

Thermal and Thermo-Mechanical Properties of Ti–Al–N and Cr–Al–N Coatings

Structure, mechanical and thermal properties of Ti1−x−y−zAlxTayBzN coatings

Structure, Mechanical and Tribological Properties of Self-Toughening TiSiN/Ag Multilayer Coatings on Ti6Al4V Prepared by Arc Ion Plating

Effect of nano-multilayered ZrN/TiAlN hard coating as the interlayer on the microstructure, mechanical properties, and wear resistance

Mechanical Properties and Thermal Stability of TiAlN/Ta Multilayer Film Deposited by Ion Beam Assisted Deposition

Mechanical, oxidation, and cutting properties of AlCrN/AlTiSiN nano-multilayer coatings

Properties and Performance of TiAlSiN and AlCrN Monolayer and Multilayer Coatings for Turning Ti-6Al-4V

Wear Behavior of TiN/TiAlSiN Nanocomposite Multilayer Coatings from Ambient Temperature to Medium Temperature

Influence of film structure on the microstructure and properties of TiAlN coatings on Al-Si alloys