Abstract:Vertically aligned carbon nanotube (VACNT) arrays are considered as promising thermal interface materials (TIMs) due to their superior out-of-plane thermal conductivities. However the air gaps between adjacent CNTs within the CNT array hinder the in-plane heat transfer, thus significantly degrading the thermal performance of VACNT-based TIMs. To improve the in-plane thermal conduction of VACNT arrays, we propose a novel three dimensional CNT (3D CNT) network structure, where VACNTs are crosslinked by randomly-oriented secondary CNTs. Three different catalyst preparation methods for the secondary CNT growth are compared in terms of their ability to produce a dense network of secondary CNTs. The 3D CNT network grown using the chemical impregnation method shows a denser network structure, and thus is chosen for further thermal characterization. The temperature fields of the corresponding 3D CNT network under different heating powers are recorded using a 15 mm-resolution infrared thermal imaging system. The in-plane thermal conductivity is then derived from these fields using numerical fitting with a 3D heat diffusion model. We find that the in-plane thermal conductivity of the 3D CNT network is 5.40 +/- 0.92 W/mK, at least 30 times higher than the thermal conductivity of the primary VACNT array used to grow the 3D CNT network. (c) 2018 Elsevier Ltd. All rights reserved.

Characterization of Carbon Nanotube Array Based Thermal Interface Material after Bonding Process

Transient Thermo-Reflectance Method for Characterization of Thermal Interface Material Based on Carbon Nanotube Array

Dense Vertically Aligned Multiwalled Carbon Nanotube Arrays As Thermal Interface Materials

Indium Assisted Multiwalled Carbon Nanotube Array Thermal Interface Materials

Effect of Contact Pressure on the Performance of Carbon Nanotube Arrays Thermal Interface Material

Thermal Conductivity Of Configurable Two-Dimensional Carbon Nanotube Architecture And Strain Modulation

Array Volume Fraction-Dependent Thermal Transport Properties of Vertically Aligned Carbon Nanotube Arrays

Electrothermal Characterization of Single-Walled Carbon Nanotube (SWCNT) Interconnect Arrays

Thermal resistance of thermal conductive adhesive anchored carbon nanotubes interface material

Vertically Aligned Multi-Walled Carbon Nanotube Arrays As Thermal Interface Materials And Measurement Technique

Thermal Properties of Carbon Nanotube Array Used for Integrated Circuit Cooling

Thermal characterization of a bridge-link carbon nanotubes array used as a thermal adhesive

Novel Three-Dimensional Carbon Nanotube Networks As High Performance Thermal Interface Materials

Double-Sided Transferred Carbon Nanotube Arrays for Improved Thermal Interface Materials

Characterize the Thermal Properties of the Vertical Aligned Carbon Nanotubes Array Used for IC Cooling with Photothermal Method

High-Quality Vertically Aligned Carbon Nanotubes for Applications as Thermal Interface Materials

Degradation of Carbon Nanotube Array Thermal Interface Materials through Thermal Aging: Effects of Bonding, Array Height, and Catalyst Oxidation

Dependence of Carbon Nanotube Array-Silicon Interface Thermal Conductance on Array Arrangement and Filling Fraction

Thermal Performance of Vertically-Aligned Multi-Walled Carbon Nanotube Array Grown on Platinum Film

Highly Deformable Thermal Interface Materials Enabled by Covalently-Bonded Carbon Nanotubes

Remarkably Enhanced Thermal Transport Based on a Flexible Horizontally-Aligned Carbon Nanotube Array Film