Abstract:In this paper, a novel profiling method, Laser Confocal Feedback Profilometery (LCFP), combining quasi-common-path heterodyne phase detection with laser confocal feedback technology, is proposed. A microchip Nd:YAG laser emits 1064nm laser, which passes through a pinhole and frequency shifter, and is focused onto the sample surface. The reflected light is coupled back to the microchip laser cavity and forms the frequency shifted feedback light, causing the laser intensity modulation. When the sample is scanned laterally, its surface height variation changes both the Phase and strength of the feedback light. LCFP then extracts both the amplitude and phase information out of the laser intensity modulation to determine the integral and fractional number of half laser wavelengths contained in the height variation of two points on the sample surface. LCFP can thus overcome the half-laser-wavelength limit of phase measurement in the axial direction. The high sensitivity of microchip laser to feedback light makes LCFP able to measure samples with very low reflectivity. The LCFP experimental setup is built, and it has successfully measured the height of the stages on a glass-substrate grating. The current performances of LCFP are as followed: the axial resolution is better than 2nm, the axial range about 5 mu m, and the detectable reflectivity as low as 10(-9). Due to its direct traceability to laser wavelength, LCFP can potentially be used as the metrology standard of small-scale features.

Laser Heterodyne Profilometer with Several Improved Techniques

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

A Novel Method to Simultaneously Measure the Straightness

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

Laser heterodyne interference signal processing system based on AD8302

Modified Homodyne Laser Interferometer Based on Phase Modulation for Simultaneously Measuring Displacement and Angle.

A Laser Heterodyne Interferometer For Measuring Surface-Roughness

Investigation of Heterodyne Interferometer Technique for Dynamic Angle Measurement: Error Analysis and Performance Evaluation

Single-Shot White-Light Dispersive Interferometric Profilometer

Two-dimensional Surface Profile Imaging Technique Based on a Double-Grating Frequency Shifter

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

Micro-vibration measuring technology based on heterodyne interference

New Type Of Common-Path Heterodyne Profilometer

Optical Profilometer Based on the Principle of Differential Interference

A Surface Profilometer Based on Laser Confocal Feedback

Precision vibration measurement using differential phase-modulated homodyne interferometry

Straightness/coaxiality measurement system with transverse Zeeman dual-frequency laser

A Two-Dimensional Surface Profile Imaging Technique Based on Heterodyne Interferometer

Laser Confocal Feedback Profilometry

Laser Heterodyne Interferometer for the Simultaneous Measurement of Displacement and Angle Using a Single Reference Retroreflector

Four-beam Two-Focus Differential Laser Velocimetry System