Abstract:Through the subtraction of two digital holographic wrapped phases for different wavelengths, it yields a beat phase image corresponding to an equivalent wavelength to remove the phase wrapping. By comparing the beat phase image with any recoding wavelength, the position and multiple of the single wavelength phase jump are confirmed. Hence, the wrapped phase in single wavelength phase is wrapped and the phase noise is kept fixed. Simulation and experimental results demonstrate the measure error induced by the phase noise can be reduced to 2Λ/λm. An optical microstructure element surface is measured by the proposed digital holography with dual wavelength of 650 nm and 632.8 nm. The measured optical element is produced with Fast Tool Servo (FTS). The unwrapped phase image of machining mark on the surface of microstructure element is acquired clearly. The equivalent wavelength is 0.024 mm. Then, the three dimensional data of the microstructure profile respectively in high frequency and low frequency regions are obtained by frequency filtering. The roughnesses corresponding to different frequency region are 33.2 nm, 19.3 nm and 23.4 nm respectively. The affecting factors for different machining mark are analyzed. The cutting parameters of the FTS are also deduced.

Two-dimensional Surface Profile Imaging Technique Based on a Double-Grating Frequency Shifter

Single-Shot White-Light Dispersive Interferometric Profilometer

A Two-Dimensional Surface Profile Imaging Technique Based on Heterodyne Interferometer

Double-grating frequency shifter for low-coherence heterodyne interferometry

Research on Two Optical Methods for Aspheric Measurement

Single-Shot Two-Dimensional Surface Measurement Based On Spectrally Resolved White-Light Interferometry

Two-Dimensional Structural Surface Measurement Based On Spectrally Resolved White-Light Interferometry

Heterodyne Fourier Transform Spectroscopy Based on Double-Grating Frequency Shifter

Two-color Interferometer for Surface Characterization Using Two Frequency Doublers and a Four-Phase-step Method.

Low Noisy Dual Wavelength Digital Holography and Application in the Ultra-precision Machining Surface Measurement

On-line Three-Dimensional Inspection Using Randomly Phase-Shifting Fringe Based on Least-Square Iteration

3D Shape Measurement for a Discontinuous Object Based on a Dualfrequency Composite Grating

High-precision 2D grating displacement measurement system based on double-spatial heterodyne optical path interleaving

A New Method Using Orthogonal Two-Frequency Grating in Online 3d Measurement

A Two-Color Heterodyne Interferometer Based on Diffraction Grating for Displacement Measurement

Surface Microstructure Profilometry Based On Laser Confocal Feedback

Two Degree-of-Freedom Fiber-Coupled Heterodyne Grating Interferometer with Milli-Radian Operating Range of Rotation

Fast Full-Field 3D Surface Profilometry by Heterodyne Interferometry of a Femtosecond Laser

Compression-coding-based Surface Measurement Using a Digital Micromirror Device and Heterodyne Interferometry of an Optical Frequency Comb.

Surface Profile Measurement Using Chromatic Confocal Microscopy

Compact Single-Shot Dual-Wavelength Interferometry for Large Object Measurement with Rough Surfaces