Abstract:With the development of mechanical engineering, the moving velocity of the machine centers and the CMMs are increased to 1000 mm/s. However, at the present time the measurement speed of the commercial heterodyne interferometer can not meet the requirement. The key element of heterodyne interferometer is a dual frequency laser, which produces two lights with different frequency, whose wavelength is used as basic scale for length measurement. The frequency difference of the dual frequency laser is the primary factor which constrains the measurement speed. A new pressure birefringence dual frequency laser was put forward to be the light source of interferometer. Magnetic field was applied on this laser to eliminate frequency difference lock-in, and therefore dual frequency laser with adjustable frequency ranging from 3 MHz to 40 MHz can be obtained, which is called mid-frequency difference. Using the new laser referred above as the light source, the dual frequency laser interferometer system is constructed. Taking the HP 5528A dual frequency laser interferometer as measuring basis, this dissertation has measured a displacement of 10 mm rang in low speed by experimental system. The standard uncertainty of measurement is less than 0.1 mu m, and the linearity is less than 0.002%. Through the measure experiment it is proved that this high speed measurement system is feasible and the system we designed for the new light source is correct. It offers a new way to improve the measurement velocity of dual frequency interferometer system.

Four-beam Two-Focus Differential Laser Velocimetry System

A Novel Method to Simultaneously Measure the Straightness

A Novel Method To Enhance The Sensitivity For Two-Degrees-Of-Freedom Straightness Measurement

A Straightness Measurement System Using a Single-Mode Fiber-Coupled Laser Module

Study of the Method for Measuring Four-Degree-of-Freedom Geometric Errors of a Linear Stage

Simultaneous Measuring Method Of Linear Guide Geometric Errors In Four-Degrees Of Freedom

A Non-Contact Dynamic Attitude Measurement System Based on 3D Oblique Laser Doppler Vibrometers

Ultralow speed measurement by laser Doppler velocimetry

Differential Two-Wave Mixing Interferometer for Crack Detection in Metallic Structures Based on Laser-Induced Ultrasound

Optical Acceleration Measurement Method with Large Non-ambiguity Range and High Resolution Via Synthetic Wavelength and Single Wavelength Superheterodyne Interferometry

Four Degree-Of-Freedom Geometric Error Measurement System with Common-Path Compensation for Laser Beam Drift

Dual-doppler signal mixing laser doppler velocimeter

Experimental Study on Zeeman-birefringence Dual-Frequency Laser Interferometer with Mid-Frequency Difference

Adaptive straightness measurement system with dual-frequency laser

Laser Heterodyne Profilometer with Several Improved Techniques

Self-Mixing Laser Doppler Velocimeter Based on Dual Frequency Lasers

All-Fiber Configuration Laser Self-Mixing Doppler Velocimeter Based on Distributed Feedback Fiber Laser

Laser Feedback Interferometric System for Both Displacement and Absolute Distance Measurement

Experimental and theoretical study of displacement measurement based on frequency modulation optical feedback in a birefringence dual frequency laser

A New Dual-Frequency Laser Doppler Velocity Measurement Method

Quasi-common-path Laser Feedback Interferometry Based on Frequency Shifting and Multiplexing.