Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Reducing Melt Inclusion By Submerged Heater Or Baffle For Optical Crystal Growth

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Study of Melt Convection and Interface Shape During Sapphire Crystal Growth by Czochralski Method

Analysis and optimization of Czochralski laser oxide crystal growth

Suppression of Melt Convection in a Proposed Bridgman Crystal Growth System

Influence of Enhancement of Heat Exchange on CdZnTe Crystal Growth Process

Three Dimensional Simulation of Melt Flow in Czochralski Crystal Growth with Steady Magnetic Fields

Diameter-Controlled Czochralski Growth of Silicon Crystals

Melt Convection and Temperature Distribution in 300 Mm Czochralski Crystal Growth with Transverse Magnetic Field

Advances of interface, flow, and stress control for VB crystal growth: An overview

Interface Diagnostics: In-situ Prediction of Constitutional Supercooling and Backmelting by Growth Interface Electromotive Force

Study and optimization of gas flow and temperature distribution in a Czochralski configuration

Numerical Investigation of the VB Growth of CaF2 Crystal with Supercooled Crucible Wall

Numerical simulation of combined flow in Czochralski crystal growth

Solidification Interface Shape Control in a Continuous Czochralski Silicon Growth System

Effects of Induced Current in Crystals on the Melt Flow and the Melt–Crystal Interface during Industrial 300 mm Czochralski Silicon Crystal Growth under a Transverse Magnetic Field

Mechanisms of Thermo-Solutal Transport and Segregation in High-Pressure Liquid-Encapsulated Czochralski Crystal Growth

Investigation of Convection Control under the Non-Uniform Rmf in A Liquid Bridge

To Control Interface Shape and to Reduce Thermal Stress During Cz-Growth of Sapphire Single Crystal

Nd:YVO4 Crystal Growth by Czochralski Technique with a Submerged Plate