Abstract:Optical and laser crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core, which severely affects optical, thermal and mechanical properties of the material. The main purpose of this paper is to study the inclusion mechanisms and to minimize such defects. Two types of mechanisms possibly responsible for inclusion defects are presented. In the current investigation, Czochralski grown optical single crystals are examined to recognize the effects of crystal rotation and natural convection on the melt flow pattern and solidification interface shape. It is established that increasing the rotation rate of crystal or reducing natural convection in the melt will cause the solid-liquid interface change from the convex shape to concave and high concentration of the species may be pushed away from the solidification interface. Simulations were performed to establish the relationships between Gr/Re-2 and growth interface shape change, and between Gr/Re-2 and stagnant point location were established. A disk submerged into the melt was used to reduce natural convection by reducing the melt height. The idea was similar to the submerged baffle or submerged heater used in Bridgeman crystal growth. The effect of submerged baffle on enhancement of crystal rotation effect was demonstrated. Simulation results showed that the melt flow near the solidification interface depended strongly on the baffle location, which was not surprised. The idea of submerged heater was also examined in Czochralski growth. Different from a constant temperature close to the melting temperature used in Bridgman growth, the submerged heater temperature should be selected on a higher temperature between the melting temperature and crucible temperature. The value depended strongly on the ratio between crystal and crucible diameters. It was proved that a constant temperature was not the best choice in Czochralski growth. In fact, an optimized temperature profile could be found in numerical simulations for melt flow control and inclusion suppression.

Numerical Investigation of the VB Growth of CaF2 Crystal with Supercooled Crucible Wall

Advances of interface, flow, and stress control for VB crystal growth: An overview

Numerical Simulation of Β-Ga2o3 Single Crystal Growth by Czochralski Method with an Insulation Lid

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Numerical modeling of faceted crystal growth using a lattice Boltzmann-phase field model with a new interfacial energy function

Optimization of the Thermal Field of 8-Inch SiC Crystal Growth by PVT Method with “3 Separation Heater Method”

Suppression of Melt Convection in a Proposed Bridgman Crystal Growth System

Optimizing crucible geometry to improve the quality of AlN crystals by the physical vapor transport method

Numerical and experimental investigation of octagonal thermal field for improving multi-crystalline silicon ingot quality

Numerical Investigation on the Effect of Thermal Gate Moving Rate on Directional Solidification Process

Numerical and experimental investigation on iron contamination of 200 mm semiconductor-grade CZ-Si by bubble-free layer of quartz crucible

Interface Diagnostics: In-situ Prediction of Constitutional Supercooling and Backmelting by Growth Interface Electromotive Force

Numerical Simulation of a Novel Method for PVT Growth of SiC by Adding a Graphite Block

Numerical analysis of thermohydraulic behavior in a directional solidification furnace

Growth Of Different Crystals Using A Modified Bridgman System

Thermal Field Simulation and Optimization of PbF2 Single Crystal Growth by the Bridgman Method

Numerical Simulation of CdTe Crystal Growth Using the Vertical Gradient Freeze Technique Assisted by Axial Low-Frequency Oscillations of the Melt

Pattern Formation under Deep Supercooling by Classical Density Functional-Based Approach

Optimization of thermal field of 150 mm SiC crystal growth by PVT method

Numerical Investigation of Bottom Grille for Improving Large-Size Silicon Quality in Directional Solidification Process

Modelling and Control of Thermal Stress in TSLAG (Tb3Sc1.95Lu0.05Al3O12) Magneto-Optical Crystals Grown by Czochralski Method