Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Interface Diagnostics: In-situ Prediction of Constitutional Supercooling and Backmelting by Growth Interface Electromotive Force

Interface diagnostics: In-situ determination of crystal-melt interface shape evolutions via probing growth interface electromotive force

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Advances of interface, flow, and stress control for VB crystal growth: An overview

Suppression of Melt Convection in a Proposed Bridgman Crystal Growth System

Recent Efforts in Modelling Combined Rate, Size and Thermal Effects on Single Crystal Strength

Thermodynamic Stability Limit of the Crystalline State from the Gibbs Perspective

Fundamental Study of Crystal/melt Interface Shape Change in Czochralski Crystal Growth

Effects of Pulling Velocity on Interface Dynamics and Solute Segregation During Crystal Growth

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Numerical Investigation of the VB Growth of CaF2 Crystal with Supercooled Crucible Wall

To investigate interface shape and thermal stress during sapphire single crystal growth by the Cz method

Numerical Investigation on the Effect of Thermal Gate Moving Rate on Directional Solidification Process

Faceting Simulation of Bulk Crystal Growth with 2d Nucleation and Screw Dislocation Theory

Towards the theory of crystal growth ahead of the moving solid–liquid phase interface: a U-shaped anomalous behaviour of the crystallization velocity of melt undercooling

Defect-mediated crystal growth from deeply undercooled melts

Investigation of Oxygen Behavior under Different Melt Flow, Diffusion Boundary Layer, and Crystal-Melt Interface in a 300 mm Silicon Crystal Growth with Cusp Magnetic Field

Intrinsic Instability of the Concentration Field in Diffusion-Limited Growth and Its Effect on Crystallization.

Control of Interface Shape During High Melting Sesquioxide Crystal Growth by HEM Technique

Uncovering the effects of interface-induced ordering of liquid on crystal growth using machine learning

A new method for computing the anisotropic free energy of the crystal-melt interface