Abstract:Gallium oxide crystals are semitransparent semiconductors with good optical and electrical properties, which allow their use for several technological applications. During the growth process of β- Ga2O3 crystals, internal radiation plays a crucial role that affects the growth process and then the crystal quality. In this work, the effect of the melt and the crystal transparency on the vertical Bridgman growth of β- Ga2O3 oxide is thoroughly studied. Using a global 2D/3D finite element model, temperature, melt flow, melt-crystal interface, and three-dimensional anisotropic thermal stress are computed at different growth stages. At each stage, four cases are considered, namely, opaque melt and crystal, semi-transparent melt and opaque crystal, semitransparent crystal and opaque melt, and finally semitransparent melt and crystal. The role of internal radiation in each case at different growth stages is then highlighted separately and then coupled together. It was found that the melt-crystal interface is shifted from a convex shape at the early stage to a nearly plane and then to a concave shape at the last stage. The melt flow is then changed from two rolls pattern at the beginning to a single-roll structure at the last stage. Thermal stress of the as-grown ingot is decreased during the growth due to the decrease of temperature non-linearities. Internal radiation inside the crystal acts to increase the melt-crystal interface convexity at the early and middle stages of the growth process and leads to a decrease in its concavity at the final stage. However, the melt transparency leads to the opposite effects, i.e., it decreases the interface convexity at the early stage and increases the interface concavity at the final stage. As a result, for semitransparent crystal and melt, the interface is between the two previous cases. The calculated thermal stresses are found to be more affected by the transparency of the crystal than the melt as the absorption coefficient of β- Ga2O3 crystal is smaller than that of the melt. At all stages, the thermal stresses are found to be larger for the opaque case due to the increase of temperature non-linearities in the crystal. Large values are found at the bottom and the lower part of the periphery. Furthermore, internal radiation inside the melt plays a major role during the early growth stage due to the large liquid volume. It reduces the melt flow intensity close to the free surface where the shear stress is combined with the buoyant force and leads to the flattening of the interface decreasing then the radial temperature gradients, which leads to small attenuation of the thermal stress. At the final stage, the transparency of the melt plays the opposite role due to the increase of the interface concavity which leads to an increase in both of the temperature gradients and the thermal stress inside the crystal. Due to the crystal anisotropy, and especially to the large thermal expansion coefficient in the [0 1 0] direction, the 3D thermal stress values are found to be larger in this direction, especially in the bottom part of the ingot. Comparisons with available experimental and numerical works are provided in this paper.

Role Of Internal Radiation With Or Without Melt Inclusions During Czochralski Sapphire Crystal Growth

To investigate interface shape and thermal stress during sapphire single crystal growth by the Cz method

To Control Interface Shape and to Reduce Thermal Stress During Cz-Growth of Sapphire Single Crystal

Analysis and optimization of Czochralski laser oxide crystal growth

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Epitaxial Growth Of Zno On Gan/Sapphire Substrate By Radio-Frequency Magnetron Sputtering

Numerical Simulation of Β-Ga2o3 Single Crystal Growth by Czochralski Method with an Insulation Lid

Nucleation Mechanism of GaN Growth on Wet Etched Pattern Sapphire Substrates

Transport Phenomena in Growth and Annealing of Laser Crystals

Investigation of Oxygen Behavior under Different Melt Flow, Diffusion Boundary Layer, and Crystal-Melt Interface in a 300 mm Silicon Crystal Growth with Cusp Magnetic Field

Growth of III-Nitride Materials and Blue Light-Emitting Diodes by Metal Organic Vapor Phase Epitaxy

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System

Reducing Melt Inclusion By Submerged Heater Or Baffle For Optical Crystal Growth

Control of GaN inverted pyramids growth on c-plane patterned sapphire substrates

Microstructural and Optical Properties of GaN Films on Nitrided Sapphire Substrates

Internal radiation effect on semiconductor β-Ga 2 O 3 crystals grown by the VB Method and anisotropic thermal stress

A Volume Radiation Heat Transfer Model for Czochralski Crystal Growth Processes

Analyses of Surface Temperatures on Patterned Sapphire Substrate for the Growth of GaN with Metal Organic Chemical Vapor Deposition

Effects of InGaN-interlayer on Closed Stripes of GaN Grown by Serpentine Channel Patterned Sapphire Substrate

Diameter-Controlled Czochralski Growth of Silicon Crystals

Dependence of Radiation Effects on System Configuration and Physical Properties in Bridgman Growth of Optical Crystals