Abstract:Optical crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core defects, which severely affect the optical, thermal and mechanical properties of the material. It is well known that the formation of melt inclusion or bubble core is highly related to species distribution in the growth system especially at the solidification interface and the shape of the growth interface. This paper has examined the flow pattern and solidification interface changes by changing the forced convection, e.g., crystal rotation and by changing the natural convection, e.g., inserting a horizontal disk plate. The relative effect of fluid-flow convection modes in the melt associated with crystal rotation rate is represented by a dimensionless parameter, Gr/Re-2. Increasing the rotation rate will cause the solid-liquid interface change from the convex shape to concave. When the crystal rotation rate is relatively low and natural convection is strong, Gr/Re-2 is large. In this case, the concentration of species pertinent to melt inclusion moves down along the axis of rotation. When the crystal rotation rate is increased, the value of Gr/Re-2 decreases. The precipitated composition spreads over the growing interface may then be swiped away from the growth interface by increased crystal rotation. Melt inclusion-free crystals can thus be obtained. The relationship between Gr/Re-2 and growth interface shape change is achieved by numerical simulations. The stagnant point location as a function of crystal rotation is also presented, which shows that the stagnant point moves outward by increasing Reynolds number and/or reducing Grashof number. From such understanding, the interface shape and melt inclusion position can then be controlled through control of Gr/Re-2 in the growth system. Many times, it is, however, not practical in the experiments to use a high rotation rate for optical crystal growth since high rotation rate will introduce the striation defects. A new design to reduce natural convection is then proposed to improve the effect of crystal rotation and to control the solidification interface shape. Numerical simulations have been performed to demonstrate the possibility of the new design. Results show that such design is very effective and practical to control the melt inclusion and the solidification interface shape.

Transport Phenomena in Growth and Annealing of Laser Crystals

Hot Zone Design for Controlled Growth to Mitigate Cracking in Laser Crystal Growth

Optimization of the Cooling Profile to Achieve Crack-Free Yb:S-FAP Crystals

Dependence of Radiation Effects on System Configuration and Physical Properties in Bridgman Growth of Optical Crystals

A Volume Radiation Heat Transfer Model for Czochralski Crystal Growth Processes

Modelling of Heat Transfer in Single Crystal Growth

Analysis and optimization of Czochralski laser oxide crystal growth

Modelling and Control of Thermal Stress in TSLAG (Tb3Sc1.95Lu0.05Al3O12) Magneto-Optical Crystals Grown by Czochralski Method

Modelling of thermal field and point defect dynamics during silicon single crystal growth using CZ technique

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Role Of Internal Radiation With Or Without Melt Inclusions During Czochralski Sapphire Crystal Growth

Grown-In Defects in Heavily Boron-Doped Czochralski Silicon

The Research on the Edge Thermal Effect of the Thin Disk Crystal in Thin Disk Lasers

Numerical Investigation of the VB Growth of CaF2 Crystal with Supercooled Crucible Wall

To investigate interface shape and thermal stress during sapphire single crystal growth by the Cz method

Faceting Simulation of Bulk Crystal Growth with 2d Nucleation and Screw Dislocation Theory

To Control Interface Shape and to Reduce Thermal Stress During Cz-Growth of Sapphire Single Crystal

Growth of Curved Crystals: Competition Between Topological Defect Nucleation and Boundary Branching.

Interface Diagnostics: In-situ Prediction of Constitutional Supercooling and Backmelting by Growth Interface Electromotive Force

Growth Of Yb-Doped Fluorapatate Crystal And Study Of Its Defects And Spectroscopy Performance

Control Of Flow Pattern And Solidification Interface Shape In An Induction Heated Czochralski Crystal Growth System