Abstract:MOEMS accelerometers bring together the advantages of both optical measurement and MEMS technique. It has higher resolution than traditional accelerometers and can be widely implemented in more application fields. Packaging is an important step for MOEMS accelerometers in their fabrication process. It can maintain the high parallelism of the upper surface of the proof mass and the grating, so that it helps to improve the temperature stability of accelerometers. In addition, it can reduce the effect of the external temperature on the sensitive structures, thereby reducing the changes of the zero drift and scale factor by temperature. Since the accelerometers measures the acceleration which involves the stress and strain of the springs, the thermal stress introduced during the packaging process will have significant side impacts on the device performance and life, etc. In this paper, we establish a finite element method (FEM) model of the MOEMS accelerometer which contains package and sensitive structure based on grating interferometry cavity. The FEM model considers the thermal coupling of sensitive structure and adhesive, adhesive and package substrate. Based on it, the influence of the thermal stress of the material of the adhesive and the substrate are studied. The results show that a good match between the coefficient of the thermal expansion (CIE) of the substrate and sensitive structure material and a reduced elastic modulus as well as the increase of thickness of the adhesive can effectively diminish the thermal stress. Besides, well designed packaging can help to reduce the zero drift and scale factor drift to minimum.

Pure Oxide Structure for Temperature Stabilization and Performance Enhancement of Cmos-Mems Accelerometer

Monolithic Cmos-Mems Pure Oxide Tri-Axis Accelerometers for Temperature Stabilization and Performance Enhancement

Monolithic Integrated Cavity Optomechanical Accelerometer Based on Push-Pull Photonic Crystal Zipper Cavity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

Development Of A Cmos-Mems Gyroscope Using Pure-Oxide And Symmetric Metal-Oxide Stacking Structures

Improvement of CMOS-MEMS accelerometer using the symmetric layers stacking design

A MOEMS Accelerometer Based on Diffraction Grating with Improved Mechanical Structure.

A Stiffness-Tunable MEMS Accelerometer

Determination of Thermally Induced Effects and Design Guidelines of Optomechanical Accelerometers

Post-Cmos Selective Electroplating Technique for the Improvement of Cmos-Mems Accelerometers

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

Design and Test of MEMS Resonant Accelerometer with a Novel Die-Attach Structure

A Three-Axis CMOS-MEMS Accelerometer Structure With Vertically Integrated Fully Differential Sensing Electrodes

Implementation of A Monolithic Single Proof-Mass Tri-Axis Accelerometer Using Cmos-Mems Technique

Design, Optimization, and Realization of a High Performance MOEMS Accelerometer from a Double-Device-Layer SOI Wafer (vol 26, Pg 859, 2017)

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

A fully-differential, multiplex-sensing interface circuit monolithically integrated with tri-axis pure oxide capacitive CMOS-MEMS accelerometers

A Novel Mems 3-Axis Thermal Accelerometer with 5-Wire Structure Using Planar Stacking Method

Structure Design of a High-Sensitivity MOEMS Accelerometer