Abstract:High-G accelerometers have a variety of applications with severe shock loadings especially in crash and impact environments. The package for a high-G accelerometer should provide both protection against such harsh environments and necessary communications with outside the package. The residual stress caused by packaging process which degrades the sensor performance should be considered at the beginning of packaging design. The accelerometer in this study is based on a piezoresistive structure fabricated by a standard MEMS fabrication process A glass cap was anodically bonded to the structure to protect the movable parts. Then a packaging substrate was fixed to above structures with an adhesive material. FEM simulation based on a simplified structure of the accelerometer has been applied in static analyses in order to find out the potential stress brought by the package. The affection of different adhesive and packaging materials on the acceletometer performance was simulated. The results of simulations show that both the Young's modulus of the adhesive and the coefficient of thermal expansion (CTE) of packaging substrate could have a significant impact on the initial output of the accelerometer. An experiment study on the affection was also conducted, and the results were similar to the results of FEM(finite element method) simulations for the simplified structure. Thus the FEM simulation of such simplified structure could serve as the basic of accelerometer packaging design. Based on former results, optimized process was suggested in the package of the accelerometer and the packaged accelerometer was tested with satisfactory results.

Design and Test of MEMS Resonant Accelerometer with a Novel Die-Attach Structure

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

Design, Test and Evaluation of a Novel Die-Attach Structure for Packaging Stress Suppression of MEMS Resonant Accelerometers

A Temperature-Insensitive Micromachined Resonant Accelerometer with Thermal Stress Isolation

Mechanical Design Optimization of A Single-Axis Moems Accelerometer Based on A Grating Interferometry Cavity for Ultrahigh Sensitivity

Monolithic Integrated Micro-Opto-Electromechanical Accelerometer Based on Michelson Interferometer Structure

A Stiffness-Tunable MEMS Accelerometer

Temperature-Insensitive Structure Design of Micromachined Resonant Accelerometers

Temperature insensitive design of MEMS resonant accelerometer

A SOI Sandwich Differential Capacitance Accelerometer with Low-Stress Package

Design and Simulation of a Micromechanical Silicon Resonant Accelerometer with Low Temperature Sensitivity

Thermal Stress Resistance for the Structure of MEMS-Based Silicon Differential Resonant Accelerometer

A MEMS Resonant Accelerometer with High Performance of Temperature Based on Electrostatic Spring Softening and Continuous Ring-Down Technique

Thermal Stress Analysis of MEMS Accelerometer Based on Finite Element Method

Fabrication and Characterization of a MEMS Thermal Convective Accelerometer on Silicon-in-Glass Substrate

Temperature Compensation of MEMS Resonant Accelerometers with an On-Chip Platinum Film Thermometer

A Novel Design of a MEMS Resonant Accelerometer with Adjustable Sensitivity

A Study of Partial Layout of Adhesive on the Thermal Drift of MEMS Capacitive Accelerometers

Study on the packaging technology for a high-G MEMS accelerometer

Measurement and Isolation of Thermal Stress in Silicon-On-Glass MEMS Structures

Accurate Identification of the Evolution of MEMS Resonant Accelerometer Residual Stresses at the Wafer-Die-Chip Level