Abstract:Compact and high-energy femtosecond fiber lasers operating around 900-950 nm are desirable for multiphoton microscopy. Here, we demonstrate a >40 nJ, sub-100 fs, wavelengthtunable ultrafast laser system based on chirped pulse amplification (CPA) in thulium-doped fiber and second-harmonic generation (SHG) technology. Through effective control of the nonlinear effect in the CPA process, we have obtained 92-fs pulses at 1903 nm with an average power of 0.89W and a pulse energy of 81 nJ. By frequency doubling, 95-fs pulses at 954 nm with an average power of 0.46 W and a pulse energy of 42 nJ have been generated. In addition, our system can also achieve tunable wavelength from 932 nm to 962 nm (frequency doubled from 1863 nm to 1919 nm). A pulse width of similar to 100 fs and sufficient pulse energy are ensured over the entire tuning range. Finally, we applied the laser in a two-photon microscope and obtained superior imaging results. Due to a relatively low repetition rate (similar to 10 MHz), similar imaging quality can be achieved at significantly reduced average power compared with a commercial 80MHz laser system. At the same time, the lower average power is helpful in limiting the thermal load to the samples. It is believed that such a setup, with its well-balanced optical characteristics and compact footprint, provides an ideal source for two-photon microscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

High Power 780 Nm Femtosecond Fiber Laser

Vector-dispersion Compensation and Pulse Pedestal Cancellation in a Femtosecond Nonlinear Amplification Fiber Laser System.

Femtosecond Fiber Laser at 780 Nm for Two-Photon Autofluorescence Imaging

256 MHz, 1 W 780 Nm Femtosecond Fiber Laser for Two-Photon Microscopy

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Robust Hollow-Fiber-pigtailed 930 Nm Femtosecond Nd:fiber Laser for Volumetric Two-Photon Imaging.

500Mw 930nm Femtosecond Nd:fiber Laser for Two-Photon Microscopic Imaging

Fiber-Based High-Energy Femtosecond Pulses Tunable from 920 to 1030 Nm for Two-Photon Microscopy

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Generation of high-power 780 nm femtosecond pulses by an all-polarization-maintaining Er-doped fiber amplification system

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

A 102 W High-Power Linearly-Polarized All-Fiber Single-Frequency Laser at 1560 Nm

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

122-W High-Power Single-Frequency MOPA Fiber Laser in All-Fiber Format

High Energy (100 Mj) and High Peak Power (8 MW) Nanosecond Pulses Delivered by Fiber Lasers and Self-Focusing Analysis Based on a Novel Mode Decomposition Method

High-energy Femetosecond Er3+-doped Fiber Laser

All-Fiber High-Power 3 GHz Ultrafast Laser System At 2.0 μm

High-Power Highly Linear-Polarized Nanosecond All-Fiber Mopa at 2040 Nm

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

Direct Generation of 148 nm and 44.6 fs Pulses in an Erbium-Doped Fiber Laser