256 MHz, 1 W 780 Nm Femtosecond Fiber Laser for Two-Photon Microscopy

Wan Yang,Danlei Wu,Guanyu Liu,Bingying Chen,Lishuang Feng,Zhigang Zhang,Aimin Wang

DOI: https://doi.org/10.1364/cleopr.2018.th4a.2

2018-01-01

Abstract:A robust 780 nm femtosecond fiber laser was demonstrated with 191 fs pulse width, 256 MHz repetition rate and 1 W average power. It is ideal for two-photon microscopic imaging.

What problem does this paper attempt to address?

Femtosecond Fiber Laser at 780 Nm for Two-Photon Autofluorescence Imaging

Wan Yang,Danlei Wu,Runlong Wu,Guanyu Liu,Bingying Chen,Lishuang Feng,Zhigang Zhang,Aimin Wang

DOI: https://doi.org/10.3788/col201917.071405

IF: 2.56

2019-01-01

Chinese Optics Letters

Abstract:We present an Er-doped fiber ( Er:fiber)-based femtosecond laser at 780 nm with 256 MHz repetition rate, 191 fs pulse duration, and over 1 W average power. Apart from the careful third-order dispersion management, we introduce moderate self-phase modulation to broaden the output spectrum of the Er: fiber amplifier and achieve 193 fs pulse duration and 2.43 W average power. Over 40% frequency doubling efficiency is obtained by a periodically poled lithium niobate crystal. Delivering through a hollow-core photonic bandgap fiber, this robust laser becomes an ideal and convenient light source for two-photon autofluorescence imaging.
Fiber-Based High-Energy Femtosecond Pulses Tunable from 920 to 1030 Nm for Two-Photon Microscopy

Fuzeng Niu,Jiayin Li,Wan Yang,Zhigang Zhang,Aimin Wang

DOI: https://doi.org/10.1109/lpt.2018.2857462

IF: 2.6

2018-01-01

IEEE Photonics Technology Letters

Abstract:We demonstrate a fiber-based femtosecond laser source, which can deliver 37 MHz, similar to 100 fs laser pulses tunable from 920 nm to 1030 nm with up to 10 nJ pulse energy. Pumped by an ultrafast Yb-doped fiber laser, a short piece of tapered photonic crystal fiber with lower dispersion was used to generate self-phase-modulation filtered for the tunable pulses. We believe that this new type of high-energy ultrafast fiber laser source can be an ideal solution for the two-photon fluorescence microscopy applications.
Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Xiang Zhang,Yi Wang,Bin Liu,Chunhua Wang,Zhen Xiang,Chong Liu

DOI: https://doi.org/10.1364/ao.53.005058

IF: 1.9

2014-01-01

Applied Optics

Abstract:A pulsed laser for laser guide stars with a 100 MHz repetition rate and 1 ns pulse width was achieved by external modulation of a continuous wave (CW) laser with a 70 kHz spectrum width. The laser is amplified first by two fiber pre-amplifiers and then by four solid-state power amplifiers. The laser achieves gains as high as 36 dB in the fiber pre-amplifiers due to the long gain medium length. The output power from the fiber amplifiers is 2.1 W. The laser receives further amplification in the solid-state amplifiers and retains good beam quality by aberration compensation. The final output average power is 102.9 W, and the beam quality factor M-2 is 1.46. The laser reaches high power without spectrum width and pulse width broadening at the 100 MHz repetition rate. The spectrum width of the pulsed laser is less than 0.8 GHz, which is close to the Fourier transform limit. Such a laser with single-frequency, high-repetition, and high-power features along with good beam quality will be valuable for many research areas. (C) 2014 Optical Society of America
High Power 780 Nm Femtosecond Fiber Laser

Zuosheng Liu,Weijian Zong,Yizhou Liu,Lijun Zuo,Cai Wen,Tongxiao Jiang,Jian Zhang,Yuxuan Ma,Zhigang Zhang,Liangyi Chen,Aimin Wang

DOI: https://doi.org/10.1364/cleo_at.2015.am1j.6

2015-01-01

Abstract:We demonstrate an 880 mW 780 nm femtosecond laser based on a high-order dispersion compensated Er-doped fiber laser and frequency doubling. It has been used on a two-photon three-axis digital scanned light-sheet microscopy.
High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Ruihong Dai,Nan Zhang,Yafei Meng,Zhenqiao Zhou,Fengqiu Wang

DOI: https://doi.org/10.1364/OE.440254

IF: 3.8

2021-01-01

Optics Express

Abstract:Compact and high-energy femtosecond fiber lasers operating around 900-950 nm are desirable for multiphoton microscopy. Here, we demonstrate a >40 nJ, sub-100 fs, wavelengthtunable ultrafast laser system based on chirped pulse amplification (CPA) in thulium-doped fiber and second-harmonic generation (SHG) technology. Through effective control of the nonlinear effect in the CPA process, we have obtained 92-fs pulses at 1903 nm with an average power of 0.89W and a pulse energy of 81 nJ. By frequency doubling, 95-fs pulses at 954 nm with an average power of 0.46 W and a pulse energy of 42 nJ have been generated. In addition, our system can also achieve tunable wavelength from 932 nm to 962 nm (frequency doubled from 1863 nm to 1919 nm). A pulse width of similar to 100 fs and sufficient pulse energy are ensured over the entire tuning range. Finally, we applied the laser in a two-photon microscope and obtained superior imaging results. Due to a relatively low repetition rate (similar to 10 MHz), similar imaging quality can be achieved at significantly reduced average power compared with a commercial 80MHz laser system. At the same time, the lower average power is helpful in limiting the thermal load to the samples. It is believed that such a setup, with its well-balanced optical characteristics and compact footprint, provides an ideal source for two-photon microscopy. (C) 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Lizhen Wang,Peizhen Xu,Yuhang Li,Jize Han,Xin Guo,Yudong Cui,Xueming Liu,Limin Tong

DOI: https://doi.org/10.1038/s41598-018-23027-9

IF: 4.6

2018-01-01

Scientific Reports

Abstract:Mode-locked Yb-doped fiber lasers around 1 μm are attractive for high power applications and low noise pulse train generation. Mode-locked fiber lasers working in soliton and stretched-pulse regime outperform others in terms of the laser noise characteristics, mechanical stability and easy maintenance. However, conventional optical fibers always show a normal group velocity dispersion around 1 μm, leading to the inconvenience for necessary dispersion management. Here we show that optical microfibers having a large anomalous dispersion around 1 μm can be integrated into mode-locked Yb-doped fiber lasers with ultralow insertion loss down to −0.06 dB, enabling convenient dispersion management of the laser cavity. Besides, optical microfibers could also be adopted to spectrally broaden and to dechirp the ultrashort pulses outside the laser cavity, giving rise to a pulse duration of about 110 fs. We believe that this demonstration may facilitate all-fiber format high-performance ultrashort pulse generation at 1 μm and may find applications in precision measurements, large-scale facility synchronization and evanescent-field-based optical sensing.
500Mw 930nm Femtosecond Nd:fiber Laser for Two-Photon Microscopic Imaging

Bingying Chen,Aimin Wang,Yudi Wang,Yijun Li,Zhigang Zhang

DOI: https://doi.org/10.1364/cleo_at.2016.jw2a.1

2016-01-01

Abstract:Get PDF Email Share Share with Facebook Tweet This Post on reddit Share with LinkedIn Add to CiteULike Add to Mendeley Add to BibSonomy Get Citation Copy Citation Text B. Chen, A. Wang, Y. Wang, Y. Li, and Z. Zhang, "500mW 930nm femtosecond Nd:fiber laser for two-photon microscopic imaging," in Conference on Lasers and Electro-Optics, OSA Technical Digest (online) (Optica Publishing Group, 2016), paper JW2A.1. Export Citation BibTex Endnote (RIS) HTML Plain Text Citation alert Save article
Robust Hollow-Fiber-pigtailed 930 Nm Femtosecond Nd:fiber Laser for Volumetric Two-Photon Imaging.

Bingying Chen,Hao Rong,Xiaoshuai Huang,Runlong Wu,Danlei Wu,Yijun Li,Lishuang Feng,Zhigang Zhang,Liangyi Chen,Aimin Wang

DOI: https://doi.org/10.1364/oe.25.022704

IF: 3.8

2017-01-01

Optics Express

Abstract:We demonstrate a robust high power 930 nm femtosecond Nd:fiber laser system with hollow-core photonic bandgap fiber (HC-PBGF) as the output delivery, which can be easily integrated into compact two-photon microscopy system for bio-imaging. The whole laser system can deliver up to 17.4 nJ, 220-fs pulses at 930 nm with repetition rate of 46 MHz. In this paper, this laser was demonstrated as the light source for volumetric imaging of zebrafish blood vessel.
950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

Nan Zhang,Ruihong Dai,Weiqi Jiang,Yafei Meng,Bo Li,Fengqiu Wang

DOI: https://doi.org/10.1109/lpt.2022.3168297

IF: 2.6

2022-01-01

IEEE Photonics Technology Letters

Abstract:We demonstrate a compact and efficient femtosecond laser operating at ~950 nm by directly frequency-doubling of a mode-locked Tm-doped fiber laser. The laser is based on a highly compact architecture, with a dispersion-managed oscillator together with only one-step frequency conversion. The output pulse width is ~270 fs, with a repetition rate of 22.1 MHz and a pulse energy of 12.9 nJ. It is believed that the greatly simplified setup makes the current laser well suited for two-photon microscopy and other biomedical and clinical applications.
4.4 nJ, 114 fs Nd-doped fiber laser pulses at 920nm for in vivo two-photon microscopic imaging

bingying chen,tongxiao jiang,weijian zong,fuzeng niu,liangyi chen,zhigang zhang,yanrong song,aimin wang

DOI: https://doi.org/10.1364/cleo_at.2015.am1j.4

2015-01-01

Abstract:We optimized pre-chirp in an Nd-doped fiber amplifier to achieve high-quality femtosecond 920 nm pulses. The in vivo zebrafish imaging proves the laser amplifier an ideal source in two-photon microscopic imaging.
Low noise, self-phase-modulation-enabled femtosecond fiber sources tunable in 740-1236 nm for wide two-photon fluorescence microscopy applications

Lu-Ting Chou,Yu-Cheng Liu,Dong-Lin Zhong,Wei-Zhong Lin,Hao-Hsuan Hung,Chao-Jin Chan,Zi-Ping Chen,Shih-Hsuan Chia

DOI: https://doi.org/10.1364/boe.422668

IF: 3.4

2021-04-23

Biomedical Optics Express

Abstract:We have demonstrated widely tunable Yb:fiber-based laser sources, aiming to replace Ti:sapphire lasers for the nJ-level ultrafast applications, especially for the uses of nonlinear light microscopy. We investigated the influence of different input parameters to obtain an expansive spectral broadening, enabled by self-phase modulation and further reshaped by self-steepening, in the normal dispersion regime before the fiber damage. We also discussed the compressibility and intensity fluctuations of the demonstrated pulses, to reach the transform-limited duration with a very low intensity noise. Most importantly, we have demonstrated clear two-photon fluorescence images from UV-absorbing fluorophores to deep red dye stains.

radiology, nuclear medicine & medical imaging,biochemical research methods,optics
910nm femtosecond Nd-doped fiber laser for in vivo two-photon microscopic imaging.

Bingying Chen,Tongxiao Jiang,Weijian Zong,Liangyi Chen,Zhigang Zhang,Aimin Wang

DOI: https://doi.org/10.1364/OE.24.016544

IF: 3.8

2016-01-01

Optics Express

Abstract:Pre-chirp technique was used in an Nd-doped fiber amplifier to optimize high-quality 910 nm pulses with the pulses width of 114 fs and pulse energy of 4.4 nJ. The in vivo zebrafish imaging results from our totally home-made microscopy proves our femtosecond Nd fiber laser an ideal source in two-photon microscopic imaging. (C) 2016 Optical Society of America
Watt-level all polarization-maintaining femtosecond fiber laser source at 1100 nm for multicolor two-photon fluorescence excitation of fluorescent proteins

Junpeng Wen,Christian Pilger,Wenlong Wang,Raghu Erapaneedi,Hao Xiu,Yiheng Fan,Xu Hu,Thomas Huser,Friedemann Kiefer,Xiaoming Wei,Zhongmin Yang

2024-02-04

Abstract:We demonstrate a compact watt-level all polarization-maintaining (PM) femtosecond fiber laser source at 1100 nm. The fiber laser source is seeded by an all PM fiber mode-locked laser employing a nonlinear amplifying loop mirror. The seed laser can generate stable pulses at a fundamental repetition rate of 40.71 MHz with a signal-to-noise rate of >100 dB and an integrated relative intensity noise of only ~0.061%. After two-stage external amplification and pulse compression, an output power of ~1.47 W (corresponding to a pulse energy of ~36.1 nJ) and a pulse duration of ~251 fs are obtained. The 1100 nm femtosecond fiber laser is then employed as the excitation light source for multicolor multi-photon fluorescence microscopy of Chinese hamster ovary (CHO) cells stably expressing red fluorescent proteins.

Optics,Biological Physics
97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Yan Wang,Yizhou Liu,Zhigang Zhang,Franz X. Kartner

DOI: https://doi.org/10.1364/cleopr.2020.c2a_2

2020-01-01

Abstract:We demonstrate a femtosecond ytterbium-doped fiber laser at 1030 nm with 1.08 GHz repetition rate, 97 W average output power using chirped pulse amplification (CPA). The compressed output pulse width is 233 fs.
Widely Tunable Ultrafast Sources For Multi-Photon Microscopy

Wei Liu,Chen Li,Hsiang-Yu Chung,Shih-Hsuan Chia,Zhigang Zhang,Franz X. Kartner,Guoqing Chang

DOI: https://doi.org/10.1364/cleo_si.2016.sm2i.7

2016-01-01

Abstract:We demonstrate energy scalable fiber-laser based sources that produce sub-100 fs pulses widely tunable from 870-1200 nm, constituting ideal driver sources for multi-photon microscopy. (C)2016 Optical Society of America
Frequency-doubled femtosecond Er-doped fiber laser for two-photon excited fluorescence imaging

Dorota Stachowiak,Jakub Bogusławski,Aleksander Głuszek,Zbigniew Łaszczych,Maciej Wojtkowski,Grzegorz Soboń

DOI: https://doi.org/10.1364/BOE.396878

2020-05-03

Abstract:A femtosecond frequency-doubled Erbium-doped fiber laser with adjustable pulse repetition rate is developed and applied in two-photon excited fluorescence microscopy. The all-fiber laser system provides the fundamental pulse at 1560 nm wavelength with 22 fs duration for the second harmonic generation, resulting in 1.35 nJ, 60 fs pulses at 780 nm. The repetition rate is adjusted by a pulse picker unit built-in within the amplifier chain, directly providing transform-limited pulses for any chosen repetition rate between 1 and 12 MHz. We employed the laser source to drive a scanning two-photon excited fluorescence microscope for ex vivo rat skin and other samples imaging at various pulse repetition rates. Due to compactness, ease of operation, and suitable pulse characteristics the laser source can be considered as an attractive alternative for Ti:sapphire laser in biomedical imaging.

Optics,Biological Physics
All-fiber GHz few-cycle pulse generation at 2 µm

Zhaoheng Liang,Minjie Pan,Wei Lin,Nan Zhang,Junpeng Wen,Xuewen Chen,Lin Ling,Zihan Li,Xiaoming Wei,Zhongmin Yang

DOI: https://doi.org/10.1364/OL.534971

2024-10-01

Abstract:We demonstrate an all-fiber GHz mode-locked laser system with few-cycle duration operating at 2 µm. Based on a dispersion-managed mode-locked oscillator, a multi-stage fiber amplifier, and a nonlinear pulse compressor, the laser system can deliver watt-level few-cycle pulses at a fundamental repetition rate of 1.041 GHz. This 2-µm pulsed laser offers outstanding performance metrics, including a pulse duration of 33 fs (corresponding to ∼5 optical cycles) and an average power of 4.17 W. Moreover, the all-fiber laser system exhibits excellent power stability, and the integrated relative intensity noise (RIN) is only 0.052% (10 Hz-1 MHz). It is anticipated that this new, to the best of our knowledge, laser source is promising for frontier applications, including coherent supercontinuum generation, nonlinear frequency conversion, and laser-material interaction.
Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Hao Zhang,Guanzhong Li,Wenchao Qiao,Rong Xu,Hongwen Xuan,Tao Li,Xian Zhao,Aimin Wang,Yizhou Liu

DOI: https://doi.org/10.1109/jlt.2023.3244867

IF: 4.7

2023-01-01

Journal of Lightwave Technology

Abstract:High-power, single-frequency lasers are important in the applications of coherent optical communication, Doppler wind lidar, and remote sensing. Here, a 10-kHz, 353-μJ, single-frequency, 574-ns, 1548-nm fiber laser system was demonstrated based on the optical pulse modulation. The 1548-nm, single-frequency seed laser with the linewidth of 1.25 kHz was modulated by two acousto-optic modulators (AOMs) into a 10-kHz pulsed laser. Two cascaded fiber amplifiers were spliced after the AOMs to scale up the pulse energy. The amplified spontaneous emission (ASE) was inhibited by the multistage amplification construction and the optical bandpass filters. A customized pulse profile was proposed to pre-compensate the temporal modulation and inhibit the stimulated Brillouin scattering (SBS) effect. The pulse duration of the amplified single-frequency pulse was 574 ns, with the peak power of 753 W. A numerical model was also built for investigating the dynamic of the interaction process inside the power amplifier. The simulated results indicate the maximum output power of the 10-kHz, customized single-frequency laser can be 3.984 W with a pulse duration of 381 ns.

engineering, electrical & electronic,optics,telecommunications
High-energy 100-ns single-frequency all-fiber laser at 1064 nm

Wei Shi,Shijie Fu,Zhao Tang,Chaodu Shi,Xiaolei Bai,Quan Sheng,Arturo Chavez-Pirson,N. Peyghambarian,Jianquan Yao,Nasser N. Peyghambarian

DOI: https://doi.org/10.1117/12.2291172

2018-02-26

Abstract:A high-energy, single-frequency fiber laser with long pulse duration of 100 ns has been experimentally investigated in an all-fiber architecture. Only 34-cm long heavily Yb-doped phosphate fiber was employed in power scaling stage to efficiently suppress the Stimulated Brillouin effect (SBS). In the experiment, 0.47 mJ single pulse energy was achieved in power scaling stage at the pump power of 16 W. The pre-shaped pulse was gradually broadened from 103 to 140 ns during the amplification without shape distortion.
Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

Wei Liu,Chen Li,Zhigang Zhang,Franz X Kärtner,Guoqing Chang

DOI: https://doi.org/10.1364/OE.24.015328

IF: 3.8

2016-01-01

Optics Express

Abstract:We propose and demonstrate a new approach to implement a wavelength-tunable ultrafast fiber laser source suitable for multiphoton microscopy. We employ fiber-optic nonlinearities to broaden a narrowband optical spectrum generated by an Yb-fiber laser system and then use optical bandpass filters to select the leftmost or rightmost spectral lobes from the broadened spectrum. Detailed numerical modeling shows that self-phase modulation dominates the spectral broadening, self-steepening tends to blue shift the broadened spectrum, and stimulated Raman scattering is minimal. We also find that optical wave breaking caused by fiber dispersion slows down the shift of the leftmost/rightmost spectral lobes and therefore limits the wavelength tuning range of the filtered spectra. We show both numerically and experimentally that shortening the fiber used for spectral broadening while increasing the input pulse energy can overcome this dispersion-induced limitation; as a result, the filtered spectral lobes have higher power, constituting a powerful and practical approach for energy scaling the resulting femtosecond sources. We use two commercially available photonic crystal fibers to verify the simulation results. More specific, use of 20-mm fiber NL-1050-ZERO-2 enables us to implement an Yb-fiber laser based ultrafast source, delivering femtosecond (70-120 fs) pulses tunable from 825 nm to 1210 nm with > 1 nJ pulse energy. (C) 2016 Optical Society of America

256 MHz, 1 W 780 Nm Femtosecond Fiber Laser for Two-Photon Microscopy

Femtosecond Fiber Laser at 780 Nm for Two-Photon Autofluorescence Imaging

Fiber-Based High-Energy Femtosecond Pulses Tunable from 920 to 1030 Nm for Two-Photon Microscopy

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High Power 780 Nm Femtosecond Fiber Laser

High energy (&gt; 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

500Mw 930nm Femtosecond Nd:fiber Laser for Two-Photon Microscopic Imaging

Robust Hollow-Fiber-pigtailed 930 Nm Femtosecond Nd:fiber Laser for Volumetric Two-Photon Imaging.

950 Nm Femtosecond Laser by Directly Frequency-Doubling of a Thulium-Doped Fiber Laser

4.4 nJ, 114 fs Nd-doped fiber laser pulses at 920nm for in vivo two-photon microscopic imaging

Low noise, self-phase-modulation-enabled femtosecond fiber sources tunable in 740-1236 nm for wide two-photon fluorescence microscopy applications

910nm femtosecond Nd-doped fiber laser for in vivo two-photon microscopic imaging.

Watt-level all polarization-maintaining femtosecond fiber laser source at 1100 nm for multicolor two-photon fluorescence excitation of fluorescent proteins

97-Watt, 1.08-Gigahertz Repetition Rate, Femtosecond Yb:fiber Laser Source

Widely Tunable Ultrafast Sources For Multi-Photon Microscopy

Frequency-doubled femtosecond Er-doped fiber laser for two-photon excited fluorescence imaging

All-fiber GHz few-cycle pulse generation at 2 µm

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

Self-phase modulation enabled, wavelength-tunable ultrafast fiber laser sources: an energy scalable approach.

High energy (> 40 nJ), sub-100 fs, 950 nm laser for two-photon microscopy