Abstract:This paper introduces a compact picosecond laser system using tapered double cladding fiber-single crystal fiber hybrid amplification technology for the first time. By modifying the Ginzburg-Landau equation, we established a simulation model and designed a passive mode-locked picosecond oscillator based on a semiconductor saturable absorber mirror. The oscillator outputs laser with a pulse width of 7.75 ps, a center wavelength of 1030.55 nm, and a spectrum width of 0.58 nm. The seed laser is stretched and amplified by the all-fiber front stage, and then injected into the tapered double cladding fiber-single crystal fiber hybrid amplifier. The laser power is amplified from 820 mw to 103.1 W, obtaining a gain of 21 dB. We used zero-phonon line pumping technology in single crystal fiber amplifier to reduce the thermal effects caused by quantum loss, thereby increasing the length of the crystal and increasing the power loading capacity. We designed a single crystal fiber amplification module using Yb:YAG with 60 mm long, 1 mm diameter and a 1 at.% doping rate for the first time. Finally a hundred-watt level picosecond laser output with a repetition frequency of 26.33 MHz, an average power of 103.1 W, a pulse width of 244.72 ps, a spectrum width of 1.16 nm, and a beam quality of M2 x = 1.368 and M2 y = 1.511 was obtained. To the best of our knowledge, this is the highest picosecond laser output power for an all-fiber front-stage combined with a single-stage single crystal fiber amplifier.

Generation of high-power 780 nm femtosecond pulses by an all-polarization-maintaining Er-doped fiber amplification system

Generation of femtosecond pulses based on efficient frequency doubling of erbium fiber oscillator-amplifier laser

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Generation Of Ultra-Stable 50-Fs Pulses Directly From An Er-Doped Fiber Oscillator

High-power, 474 Fs, 31.12 MHz, All-Polarization-maintaining, 1560 Nm Fiber Laser System Based on the Chirped-Pulse Amplification

Characteristics of Second Harmonic Generation in Erbium Doped Femtosecond Fiber Lasers Based on Quasi Phase Matching

Broadband High-Power Mid-Ir Femtosecond Pulse Generation from an Ytterbium-Doped Fiber Laser Pumped Optical Parametric Amplifier

Old Wavelength, New Performance: Hectowatt 200-μJ-level Femtosecond fiber CPA System at 1064 Nm

900 MHz Fundamental Repetition Rate Femtosecond Er:fiber Laser Mode Locked by Nonlinear Polarization Evolution

Generation of 47 Fs Pulses from an Er: Fiber Amplifier

High-energy femtosecond pulse generation from a hybrid mode-locked large-mode-area Er:ZBLAN fiber laser

Generation of sub-30 fs pulses from an erbium-doped fiber amplifier at 203 MHz repetition rate

High Power 780 Nm Femtosecond Fiber Laser

Efficient Green-Light Generation by Frequency Doubling of a Picosecond All-Fiber Ytterbium-Doped Fiber Amplifier in PPKTP Waveguide Inscribed by Femtosecond Laser Direct Writing

Compact hundred-watt level picosecond laser system based on tapered double cladding fiber-single crystal fiber hybrid amplifier

Generation of a 59 Fs Pulse with a 550 Nm Spectral Range in a Mode-Locked Er-doped Single-Mode Fiber Laser System

10-µJ-level femtosecond pulse generation in the erbium CPA fiber source with microstructured hollow-core fiber assisted delivery and nonlinear frequency conversion

High Energy and High Power Single Frequency 1572 nm Laser With an All-Fiber MOPA

112-Μj 180-Fs Pulses at 1-Khz Repetition Rate from Yb-Doped Laser Based on Strictly All-Fiber CPA Structure

GHz fundamental repetition rate femtosecond Er:fiber laser mode locked by nonlinear polarization evolution

Yb-fiber-pumped high-average-power picosecond optical parametric oscillator tunable across 1.3-1.5 μm