Abstract:High-power, single-frequency lasers are important in the applications of coherent optical communication, Doppler wind lidar, and remote sensing. Here, a 10-kHz, 353-μJ, single-frequency, 574-ns, 1548-nm fiber laser system was demonstrated based on the optical pulse modulation. The 1548-nm, single-frequency seed laser with the linewidth of 1.25 kHz was modulated by two acousto-optic modulators (AOMs) into a 10-kHz pulsed laser. Two cascaded fiber amplifiers were spliced after the AOMs to scale up the pulse energy. The amplified spontaneous emission (ASE) was inhibited by the multistage amplification construction and the optical bandpass filters. A customized pulse profile was proposed to pre-compensate the temporal modulation and inhibit the stimulated Brillouin scattering (SBS) effect. The pulse duration of the amplified single-frequency pulse was 574 ns, with the peak power of 753 W. A numerical model was also built for investigating the dynamic of the interaction process inside the power amplifier. The simulated results indicate the maximum output power of the 10-kHz, customized single-frequency laser can be 3.984 W with a pulse duration of 381 ns.

High Energy (100 Mj) and High Peak Power (8 MW) Nanosecond Pulses Delivered by Fiber Lasers and Self-Focusing Analysis Based on a Novel Mode Decomposition Method

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Nonlinearity Optimization of Dissipative-Soliton Fiber Laser for Generation of Pulses with 350 Kw Peak Power

High Energy and High Peak Power Nanosecond Pulses Generated by Fiber Amplifier

Nanosecond-pulse High-Peak-power Circle-Focusing Laser Beam for Laser Processing

Nanosecond Pulses with High Energy (100 mJ) and High Peak Power (8 MW) Generated by Super- Radiation Fiber Amplifier System

100 MW Peak Power Picosecond Laser Based on Hybrid End-Pumped Nd:YVO4 and Side-Pumped Nd:YAG Amplifiers

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

All-Fiber Millijoule Energy and Nanoseconds Pulse Operation of A High Beam Quality Multi-Stage Pulse-Pumped Yb-Doped Amplifier Cascade

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

High energy, single-polarized, single-transverse-mode, nanosecond pulses generated by a multi-stage Yb-doped photonic crystal fiber amplifier

670 Kw Nanosecond All-Fiber Super-Irradiation Pulsed Amplifiers at High Repetition Rates

High-energy 100-ns single-frequency all-fiber laser at 1064 nm

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

Higher-order Mode Fiber Enables High Energy Chirped-Pulse Amplification.

High Peak Power and High Beam Quality Fiber-Solid Hybrid Amplification Laser System

Linearly-polarized single-transverse-mode high-energy multi-ten nanosecond fiber amplifier with 50W average power.

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

High Energy, Monolithic Fiber Femtosecond Lasers