Abstract:We report the high peak power picosecond hybrid fiber and solid-state laser amplifier system. The passively mode-locked solid-state seed source produced an average power of 1.8 W with pulse width of 14 ps and repetition rate of 86 MHz. It was directly coupled into the first Yb-doped polarized photonic crystal fiber amplifier stage. To avoid the nonlinear effects in fiber, the output power from the first stage was merely amplified to 24 W with the narrow spectra broadening of 0.21 nm. For the improvement of the peak power, the dual-end pumped composite Nd:YVO4 amplifier system has been chosen at the second stage. To reduce the serious thermal effect, the thermally bonded composite YVO4 – Nd:YVO4 – YVO4 rod crystal was used as the gain medium. The 53 W TEM00 mode with the peak power of 40 kW, beam quality of M2 < 1.15, corresponding to the optical-optical efficiency of 42.4% was obtained at the hybrid amplifier laser system. The system allows using a low power seed source and demonstrates an increase in the peak power beyond a fiber master oscillator power amplifier's (MOPA's) limit.

High Peak Power and High Beam Quality Fiber-Solid Hybrid Amplification Laser System

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

High Peak Power Picosecond Hybrid Fiber and Solid-State Amplifier System

100 MW Peak Power Picosecond Laser Based on Hybrid End-Pumped Nd:YVO4 and Side-Pumped Nd:YAG Amplifiers

8.2 Kw High Beam Quality Quasi-Continuous-Wave Face-Pumped Nd:Yag Slab Amplifier

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Nanosecond-pulse High-Peak-power Circle-Focusing Laser Beam for Laser Processing

Hybrid fiber-single crystal fiber chirped-pulse amplification system emitting more than 1.5 GW peak power with beam quality better than 1.3

All-fiber High Energy and Peak Power Broadband Yb-doped Fiber Amplifier

1.2 kW, 20 kHz Nanosecond Nd:YAG Slab Laser System

High Power Diode-Side-Pumped 1 112-Nm Nd:Yag Laser Based on Master-Oscillator Power-Amplifier System

High Energy (100 Mj) and High Peak Power (8 MW) Nanosecond Pulses Delivered by Fiber Lasers and Self-Focusing Analysis Based on a Novel Mode Decomposition Method

72-Kw High-Peak-power Linearly-Polarized Single-Mode Pulsed Fiber Laser with 80 Khz Repetition Rate and 4.5 Ns Duration

High energy single-frequency double-pulse hybrid MOPA system

High-power, 474 Fs, 31.12 MHz, All-Polarization-maintaining, 1560 Nm Fiber Laser System Based on the Chirped-Pulse Amplification

High-peak-power, single-frequency, single-mode, linearly polarized, nanosecond all-fiber laser based on self-phase modulation compensation

High Peak Power Hybrid Mopa Laser With Tunable Pulse Repetition Frequency And Pulse Duration

Low repetition rate broadband high energy and peak power nanosecond pulsed Yb-doped fiber amplifier

95-Ps All-Solid-state Laser with a Low-Power Microchip Laser Seed and a Two-Stage Single-Pass Bounce Geometry Amplifier

High-peak-power nanosecond pulse laser at 915 nm based on all-fiber structure

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters