Abstract:This paper presents a study of the characteristic effects of the physicochemical properties of microcrystalline cellulose and a series of biocarbon samples produced from this raw material through thermal conversion at temperatures ranging from 200 °C to 850 °C. Structural studies revealed that the biocarbon samples produced from cellulose had a relatively low degree of graphitization of the carbon and an isometric shape of the carbon particles. Based on thermal investigations using the differential thermal analysis/differential scanning calorimeter method, obtaining fully formed biocarbon samples from cellulose feedstock was possible at about 400 °C. The highest direct carbon solid oxide fuel cell (DC-SOFC) performance was found for biochar samples obtained via thermal treatment at 400-600 °C. The pyrolytic gases from cellulose decomposition had a considerable impact on the achieved current density and power density of the DC-SOFCs supplied by pure cellulose samples or biochars derived from cellulose feedstock at a lower temperature range of 200-400 °C. For the DC-SOFCs supplied by biochars synthesised at higher temperatures of 600-850 °C, the "shuttle delivery mechanism" had a substantial effect. The impact of the carbon oxide concentration in the anode or carbon bed was important for the performance of the DC-SOFCs. Carbon oxide oxidised at the anode to form carbon dioxide, which interacted with the carbon bed to form more carbon oxide. The application of biochar obtained from cellulose alone without an additional catalyst led to moderate electrochemical power output from the DC-SOFCs. The results show that catalysts for the reverse Boudouard reactions occurring in a biocarbon bed are critical to ensuring high performance and stable operation under electrical load, which is crucial for DC-SOFC development.

C205 EFFECTS OF TEMPERATURE ON DIRECT CARBON FUEL CELL ANODE REACTION CHARACTERISTICS(Fuel Cell-1)

Effect of Contact Type Between Anode and Carbonaceous Fuels on Direct Carbon Fuel Cell Reaction Characteristics

Performance improvement of direct carbon fuel cell by introducing catalytic gasification process

Optimization of a Direct Carbon Fuel Cell for Operation below 700 °C

Achieving Direct Electrochemical Oxidation of Carbon below 600oC through a Novel Direct Carbon Fuel Cell

Thermal Effects in H2O and CO2 Assisted Direct Carbon Solid Oxide Fuel Cells

Reaction Characteristics of Direct Carbon Fuel Cell with YSZ Single Crystal Electrolyte and Molten Sn Anode

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

A Carbon in Molten Carbonate Anode Model for a Direct Carbon Fuel Cell

The Thermal Effect in Direct Carbon Solid Oxide Fuel Cells

Effects Of Anode Diffusion On Direct Methanol Fuel Cell (Dmfc) Performance

Evaluation of Carbon Deposition Behavior on the Nickel/yttrium-Stabilized Zirconia Anode-Supported Fuel Cell Fueled with Simulated Syngas

A Comparative Study of Different Carbon Fuels in an Electrolyte-Supported Hybrid Direct Carbon Fuel Cell

Studies on the Carbon Reactions in the Anode of Deposited Carbon Fuel Cells

Effects of Discharge Mode and Fuel Treating Temperature on the Fuel Utilization of Direct Carbon Solid Oxide Fuel Cell

Electrochemical characterization and degradation analysis of a flat-chip solid oxide fuel cell fed by ambient temperature inlet gas

Investigation of ceria-molten carbonate electrolyte, composite anode and its catalytical effect on various carbon fuels in molten carbonate direct coal/carbon fuel cell

Temperature and structural dependence of electrochemical activity and fuel cell performance

Comparative study on the electrochemical performance of coals and coal chars in a molten carbonate direct carbon fuel cell with a novel anode structure

Investigating the Effects of the Physicochemical Properties of Cellulose-Derived Biocarbon on Direct Carbon Solid Oxide Fuel Cell Performance

Experimental Study on Anode Components Optimization for Direct Glucose Fuel Cells