Abstract:Direct carbon fuel cell (DCFC) has received much attention over the past decade. It represents a way to efficiently convert the chemical energy in solid carbon fuels (mainly from fossil fuels) directly into electrical energy and produce high concentration carbon dioxide that can be easily captured and sequestered. In this process, the thermal efficiency is as high as 100% because of the almost zero entropy change. Molten carbonate is employed as one kind of candidate electrolyte in DCFC in previous study. In this work, the electrochemical performance of a DCFC single cell being used three kinds of molten carbonate eutectic electrolyte with different composition was investigated. Anode fuel: graphite rod, diameter = 6.0 mm; Cathode: closed-bottom porous nickel tube, inner diameter = 41.6 mm, thickness = 4.0 mm, a mixture of CO2 and O2 (with the mol ratio of 2:1) was served as reactant in the cathode; Electrolyte: three kinds of carbonate melt were used, the property of them are listed in table 1; Operating temperature: 923.15 K. The electrochemical performance was measured by Computerized Electrochemical Instruments CBI660B (Chenhua Ltd. Shanghai). Fig. 1 shows the electrochemical performance of the single DCFC cell based on three kinds of molten carbonate electrolytes. The performance of 52.0Li/48.0Na electrolyte is as same as that of 62.0Li/38.0K electrolyte, and both are better than that of 43.5Li/31.5Na/25.0K electrolyte at low current density. However, at high current density, 52.0Li/48.0Na electrolyte performances best among them. The peak power densities are 10.29 mW cm-2, 22.65 mW cm-2, 25.66 mW cm-2 in the order of 43.5Li/31.5Na/25.0K, 62.0Li/38.0K, 52.0Li/48.0Na carbonate electrolyte. In conclusion, molten carbonate is a kind of promising electrolyte in DCFC. For various carbonates with different composition, 52.0Li/48.0Na carbonate melt has the best electrochemical performance.

A Comparative Study of Different Carbon Fuels in an Electrolyte-Supported Hybrid Direct Carbon Fuel Cell

Investigation of ceria-molten carbonate electrolyte, composite anode and its catalytical effect on various carbon fuels in molten carbonate direct coal/carbon fuel cell

Comparative study on the electrochemical performance of coals and coal chars in a molten carbonate direct carbon fuel cell with a novel anode structure

Electrochemical performance of direct carbon fuel cell based on molten carbonate eutectic electrolytes

Optimization of a Direct Carbon Fuel Cell for Operation below 700 °C

New results on a direct carbon fuel cell based on a composite electrolyte

A Direct Carbon Fuel Cell with (molten Carbonate)/(doped Ceria) Composite Electrolyte

A Carbon in Molten Carbonate Anode Model for a Direct Carbon Fuel Cell

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

Coal Pretreatment and Ag-infiltrated Anode for High-Performance Hybrid Direct Coal Fuel Cell

Performance improvement of direct carbon fuel cell by introducing catalytic gasification process

Experimental investigation of Direct Carbon Fuel Cell fueled by almond shell biochar: Part II. Improvement of cell stability and performance by a three-layer planar configuration

Achieving Direct Electrochemical Oxidation of Carbon below 600oC through a Novel Direct Carbon Fuel Cell

An Analysis of Technical Research Advances in Direct Carbon Fuel Cell Technology

Achieving High Performance in Intermediate Temperature Direct Carbon Fuel Cells with Renewable Carbon As A Fuel Source

Effect of Different Structures of Carbon Supports for Cathode Catalyst on Performance of Direct Methanol Fuel Cell

Theoretical Electromotive Force and Performance of SOFC Fed with Different Fuel Gases

Studies on the Carbon Reactions in the Anode of Deposited Carbon Fuel Cells

On the Catalytic Activity of Ceria for Direct Carbon Conversion in a SOFC

Nano-structured Carbon Support for Pt/C Anode Catalyst in Direct Methanol Fuel Cell

A Direct Carbon Fuel Cell With A Cuo-Zno-Sdc Composite Anode